What is the meaning of most efficient crosssection

Assignment Help Civil Engineering
Reference no: EM13534549

1.A sand is densified by compaction at a construction site so thatthe void ratio changes from 0.8 to 0.5. If the specific gravity ofthe soil solids is 2.7, what is the increase in the dry unit weightof the sand (in pcf and kN/m3)?

2.a) What is the meaning of ‘most efficient crosssection’ for open channels?

b) A rectangular channel has a bottomwidth = b and flow depth = y. Prove that for a given area, the mostefficient rectangular cross section is one with y = b/2.

Reference no: EM13534549

Questions Cloud

Calculate specific surface : Immediately after the bouncing golf ball leaves the floor itscomponent of velocity are Vx= 0.662 m/s and Vy= 3.66 m/s. determinethe horizontal distance from the point where the bal
Is the fluid accelerating uphill : A fluid with a specific weight of 100lb/ft^3 and a negligibleviscous effects flows in a pipe. The pipe is inclined at 30degrees. Point (1) is located above point (2) in the pipe.
Show that 1 millimeter of the 0.02 n h2so4 solution : A load of 14 tonnes is suspended at the end of a steel rope.If the load is subjected to a maximum acceleration/deceleration of2.5m/s2, when raised and lowered, calculate the diameter of therope needed to support the load. Assume the following:
Compute the pressure at a point in a building : A rectangular culvert 4 feet x 6 feet is running full and discharging 3,500 cfm. There is no friction loss. Find the velocity in fps. The culvert empties into a 10 ft wide culvert and the velocity reduces to 0.6 fps. How deep is the water level in th..
What is the meaning of most efficient crosssection : A rectangular channel has a bottomwidth = b and flow depth = y. Prove that for a given area, the mostefficient rectangular cross section is one with y = b/2.
What is the concentration in ppm at the downstream reach : Five million gallons per day (mgd) of a conservative substance,with concentration of 10 mg/L is released into a stream having anupstream flow of 10.0 mgd and a substance concentration of 3 mg/L.Assume complete mixing.
What is the true air speed : Given that an aircraft flying at FL350 encounters a tailwindof 35 knots and the instrument in the cockpit shows anindicated airspeed of 310 knots. What is the standard atmosphere atthis altitude?
What is the area of one of these walls : A new athletics stadium with a curved concrete roof is beingdesigned. Each of the end walls is 25 metres long. Its height ymetres is given by
What is the dimension of a strip footing : Based on given soil data. Soil is a loam with grain the #200sieve. The Liquid Limit = 29, Plastic Limit = 24, friction angleφ = 25 degree, cohesion c = 0.21 tons/sf, unit weight γ=124lb/ft3.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Two pieces of steel are held together with six bolts one

two pieces of steel are held together with six bolts. one end of the first piece of steel is welded to a beam and the

  Determine storage 1hour later if the average rates are given

The storage in a rectangular section irrigation channel is 20,000 m2 at a given time. Determine the storage 1 hour later if the average rates of inflow and outflow during the hour are 23 and 18 m3/s respectively.

  What is the probability that both rain and lightning occur

Let event Y be a rainstorm on a given day and event X be lightning on a given day. Let probability of these events be: P(X)=0.3 P(Y)=0.1 P(Y|X)=0.5 What is the probability that both rain and lightning occur on a given day

  Determine what is the rotational velocity at the instant

A fan blade, initially at rest, rotates with a constant rotational acceleration of 0.9rad/s^2. What is its rotational velocity at the instant it goes through an rotational displacement of 5 radians

  Determinethe required diameter of the pin at joint b

A simple truss with joint detail is shown at the left. determinethe required diameter of the pin at joint B if a factor of safetyof 1.8 with respect to shear yielding is required, and the pn is tobe made of steel having shering stress of 145 MPa

  The nominal flexural strength of this beam

A W16 x 36 simply supported beam is 30 ft long and supports auniform dead load of 970 lb/ft, a roof live load of 240 lb/ft and asnow load of 270 lb/ft. Is this beam adequate to support the load? Please show the calculations.

  What is the density

A valueable preserved biological specimen is weighed by suspeding it from a spring scale. it weighs 0.45 N when it is suspendedin air and 0.081 N when it is suspended in a bottle of alchol what is its dencity?

  Calculate capillary pressure for the inner capillary tube

Two glass capillary tubes of inside diameters of 20 and 13 microns are used to test the capillary rise in an annular cross section .The wall thickness of each capillary is 2 microns .The smaller capillary tube is inserted in the larger one so that..

  Determine the required length of superelevation runoff

A simple highway curve is planned to connect two horizontal tangents that intersect at sta. 2500+00.00 at an external angle of 52°. For a design speed of 60 mi/h and a curve radius of about 1.25 times the minimum allowable

  Scenario this is a real case project client is considering

scenario this is a real case project client is considering building a four story dual usage flats suitable for both

  Compute the maximum acceptable tensile load pu on an angle

compute the maximum acceptable tensile load pu on an angle l6x4x34 when connected to both legs. the 4 in. leg contains

  Determine what is the effluent concentration at the rate

A first order reaction occurs in a PFR at the rate of 2.1 hr^-1. The reactor volume is 1400L and flow is 15 gpm. If the influent concentration is 200 mg/L, then what is the effluent concentration

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd