What is the concentration in ppm at the downstream reach

Assignment Help Civil Engineering
Reference no: EM13534548

Five million gallons per day (mgd) of a conservative substance,with concentration of 10 mg/L is released into a stream having anupstream flow of 10.0 mgd and a substance concentration of 3 mg/L.Assume complete mixing.

a. What is the concentration in ppm at the downstream reach?

b. What is the mass rate of the substance in lb/day passing justdownstream of the junction?

Reference no: EM13534548

Questions Cloud

Is the fluid accelerating uphill : A fluid with a specific weight of 100lb/ft^3 and a negligibleviscous effects flows in a pipe. The pipe is inclined at 30degrees. Point (1) is located above point (2) in the pipe.
Show that 1 millimeter of the 0.02 n h2so4 solution : A load of 14 tonnes is suspended at the end of a steel rope.If the load is subjected to a maximum acceleration/deceleration of2.5m/s2, when raised and lowered, calculate the diameter of therope needed to support the load. Assume the following:
Compute the pressure at a point in a building : A rectangular culvert 4 feet x 6 feet is running full and discharging 3,500 cfm. There is no friction loss. Find the velocity in fps. The culvert empties into a 10 ft wide culvert and the velocity reduces to 0.6 fps. How deep is the water level in th..
What is the meaning of most efficient crosssection : A rectangular channel has a bottomwidth = b and flow depth = y. Prove that for a given area, the mostefficient rectangular cross section is one with y = b/2.
What is the concentration in ppm at the downstream reach : Five million gallons per day (mgd) of a conservative substance,with concentration of 10 mg/L is released into a stream having anupstream flow of 10.0 mgd and a substance concentration of 3 mg/L.Assume complete mixing.
What is the true air speed : Given that an aircraft flying at FL350 encounters a tailwindof 35 knots and the instrument in the cockpit shows anindicated airspeed of 310 knots. What is the standard atmosphere atthis altitude?
What is the area of one of these walls : A new athletics stadium with a curved concrete roof is beingdesigned. Each of the end walls is 25 metres long. Its height ymetres is given by
What is the dimension of a strip footing : Based on given soil data. Soil is a loam with grain the #200sieve. The Liquid Limit = 29, Plastic Limit = 24, friction angleφ = 25 degree, cohesion c = 0.21 tons/sf, unit weight γ=124lb/ft3.
What is the pressure at the leading edge : When an airplane is flying 200mph at 5000-ft altitude in standardatmosphere, the air velocity at a certain point on the wing is 273mph relative to the airplane. What suction pressure is developed onthe wing at that point? What is the pressure at the ..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the tension in the support cable

A sailor is being rescued using a boatswain's chair that issuspended from a pulley that can roll freely on the support cableACB amd is pulled at a constant speed by cablle CD

  Determine the m and o costs for alternative s

Alternative R has a first cost of $100,000, annual M&O costs of $50,000, and a $20,000 salvage value after 5 years. Alternative S has a first cost of $175,000 and a $40,000 salvage value after 5 years

  Determine the rate of increase of the piezometric head

The gasoline at point C and time t has an acceleration given by a=(-12i+40k) ft/s^2 where i and k are the horizontal and vertical unit vectors. Find the rate of increase of the piezometric head and the pressure in the x,y,z and a directions.

  Calculate the angular displacement for the pulley d

The cylinder B is released from rest. Determine the speed of both masses (vA and vB) after B moves by h m. Also calculate the angular displacement for the pulley D. The diameter of the pulley D is 0.2 m. Neglect all friction.

  Calculate the angles made by f with the postive x

a force is specified by the vector F=160i+80j-120k N.calculate the angles made by F with the postive x y and z axes.

  Calculate what is the porosity of the sand

You have a beaker filled with coarse sand. The capacity of the beaker is 100cm^3. Next, you add to the beaker 40cm^3 of distilled water, filling the water level exactly to the top of the sand.

  Design a curve for the highway by computing the radius

The PI is at station 250+50, the design speed is 65mi/h, and a maximum superelevation of 0.07 ft/ft is to be used. If the central angle of the curve is 38 degrees, design a curve for the highway by computing the radius and stationing of PC and PT.

  Determine the elevation of the lowest point of the curve

A 400ft equal-tangent sag vertical curve has its PVC at station 200 + 00 and elevation 250ft. The initial grade is -5.0% and the final grade is +2.5%. Determine the elevation of the lowest point of the curve.

  Determine what will go into freezing the ice

You try to freeze one liter of water at 10 degrees Celsius in ice trays in your freezer. Your freezer has a coefficient of performance of 5.5 and a power rating of 550 Watts, though only 10% of the power will go into freezing the ice.

  Determine the height of capillary rise to smooth glass

Plot the distribution of vertical effective stress and porewater pressure with depth if the void ratio of the sand is 0.6 and the degree of saturation is 90%. Neglect pore air pressure

  What is maximum weight of crate that system can support

Rope BCA passes through a pulley at point C and supports a crate at point A. Rope segment CD supports the pulley and is attached to an eye anchor embedded in a wall.

  Elevation of the curve turning point

Set up a table showing curve elevations at the PVC, at the PVT, and at the half-station points along the curve. Compute the station and elevation of the curve turning point.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd