Maintenance of bituminous roads, Civil Engineering

Assignment Help:

Maintenance of Bituminous Roads:

The common defects noticed in a bituminous road are :

  • potholes
  • cracks
  • rutting
  • corrugations
  • shoving
  • stripping and loss of aggregates
  • edge breaking
  • loss of riding quality
  • bleeding or fattened surface
  • loss of skid resistance
  • oxidation of bituminous surface

Potholes are repaired by cutting the damaged area to a rectangular shape, applying a tack coat and filling the area with premixed material and compacting. The premixed material is either produced with heated bitumen or preferably a cold mix made with emulsion.


Related Discussions:- Maintenance of bituminous roads

Determine the project duration and critical path, Critical Path - Activity ...

Critical Path - Activity on Node The project precedence table shown below provides the relationships and durations of all activities. Based on end-of-day calculations for start

Coagulation, Incoming water contains 2.5 mg/L as a substance of natural alk...

Incoming water contains 2.5 mg/L as a substance of natural alkalinity (HCO3-). The flow rate is 9.5 ML/day). (a) What feed rate is required if the alum dose is 7 mg/L and is avail

Calculate the actual water cement ratio, Calculate the Actual Water Cement ...

Calculate the Actual Water Cement Ratio A jobsite delivery ticket is shown below for a grout mix.  The actual w/c ratio is most nearly: Solution:       Note, althou

Shallow foundations, The drainage system of a cantilever wall shown in Figu...

The drainage system of a cantilever wall shown in Figure As 1 became blocked after a heavy rainstorm and the groundwater level, which was originally below the base, rose to1.5 (m)

Steady and uniform flow, During steady and uniform flow through an open cha...

During steady and uniform flow through an open channel of uniform cross section, a person claims that the specific energy of the fluid remains constant. A second person claims that

Shear strength of concrete., why do we use effective depth ''d'' in calcula...

why do we use effective depth ''d'' in calculating the shear capacity of uncracked Concrete beam. If it is uncracked, why cant we use the full depth ''D''.

structure analysis 2, what is ild for indeterminate beam and explain its p...

what is ild for indeterminate beam and explain its procedure

Bituminous Macadam, What is the difference between Dense bituminous Macadam...

What is the difference between Dense bituminous Macadam and bituminous macadam

Deep foundation, At what places deep foundation are made?

At what places deep foundation are made?

Device of cavitations in pipes and drains, Question What is device of cavit...

Question What is device of cavitations in pipes and drains ? Answer Cavitations refer to arrangement of air foam in fluid in low-pressure condition that is lower than satura

Write Your Message!

Captcha
Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd