What must be its composition if this is notpossible

Reference no: EM13531076

It is desirable to produce a copper-nickel alloythat has a minimum noncold-worked tensile strength of 380 MPa(55,000 psi) and a ductility of at least 45% EL. Is such an alloypossible? If so, what must be its composition? If this is notpossible, then explain why.

Reference no: EM13531076

Questions Cloud

Fresh water fish do not survive in water : If the concentration of glucose in plasma is 5 mM, and theintracellular glucose concentration is negligible (i.e. 0 mM), whatis the rate of glucose diffusion (J) into the cell? Assume that thethickness of the plasma membrane is 10 nm.

What safety factor will be necessary to allow an extraction : A lead-zinc mine is to be developed by a room-and-pillar layout. The mine is located at a depth of 500ft, the overlying rock has an average specific gravity of 2.56, and the pillar rock wast tested and found to have a

What is the composition of the last solid remaining prior : What is the composition of the last solid remaining prior tocomplete melting?

Determine the concentration of carbon in this alloy : The microstructure of an iron-carbon alloy consistsof proeutectoid ferrite and pearlite; the mass fractions of thesetwo microconstituents are 0.174 and 0.826, respectively. Determinethe concentration of carbon in this alloy.

What must be its composition if this is notpossible : It is desirable to produce a copper-nickel alloythat has a minimum noncold-worked tensile strength of 380 MPa(55,000 psi) and a ductility of at least 45% EL. Is such an alloypossible? If so, what must be its composition? If this is notpossible, then ..

What is the composition of the ß phase : A hypothetical A-B alloy of composition 40 wt%B-60 wt%A at sometemperature is found to consist of mass fractions of 0.66 and 0.34for the αand β phases, respectively. If the composition of the α phase is 13 wt% B-87 wt% A, what is the composition ofth..

What types of proteins had to have been degraded to isolate : What types of proteins had to have been degraded to isolate theDNA? Why is DNA considered to be an acid?

What is the total lenth ac and its standard deviation : A line AC was observed in 2 sections AB and BC, with lengthsand standard deviations listed below. What is the total lenth AC and its standard deviation?

How to find the cp and cpk : Determine Cp and Cpk for this process. Comment on processcentering and stability. the specification range is0.500+/-0.005

User Account

All Pages