What distance away from the truck was he when he first

Assignment Help Civil Engineering
Reference no: EM13559344

A motorist traveling at 55 mph down a grade of 5% on a highway observes an accident involving an overturned truck ahead of him which completely blocked the road. If the motorist was able to stop his vehicle 30 ft away from the overturned truck, what distance away from the truck was he when he first observed the accident?

Assume perception/reaction time of 2.5 seconds

For this particular problem we can ignore the friction value and just use a standard deceleration rate of 11.2 ft/sec.

Reference no: EM13559344

Questions Cloud

What length of the existing level highway must be reconstruc : At a railroad crossing, an overpass must be built centered over the tracks at a height of 24ft and be 200ft long. the existing highway has a design speed of 50mi/hr. what length of the existing level highway must be reconstructed to provide an approp..
Find the pollutant concentration leaving each pond : The two-pond system shown below is fed by a stream with a flow rate of 1.0 MGD and a non-conservative pollutant concentration of 20.0 mg/L. The rate of biological consumption is 0.3 day-1.
At what point on the expressway should the motorist : A motorist traveling at 55 mph on an expressway intends to exit from the expressway using an exit ramp with a maximum allowable speed of 30 mph. At what point on the expressway should the motorist step on her brakes in order to reduce her speed to th..
Determine the drivers perception/reaction time before : A test of a driver’s perception/reaction time is being conducted on a special testing track with wet pavement and a driving speed of 55 mph. When the driver is sober, a stop can be made just in time to avoid hitting an object that is first visible 52..
What distance away from the truck was he when he first : A motorist traveling at 55 mph down a grade of 5% on a highway observes an accident involving an overturned truck ahead of him which completely blocked the road
Find when and the distance that a catches up with b : Two objext A and B are moving along the same line. At the time t=0, B is 75ft ahead of A. The acceleration of A is 1.8ft/s^2 and the acceleration of B is -1.3ft/s^2. The velocity of A is 32ft/s and the velocity of B is 51ft/s.
How do you classify a structure as determinant : If the design speed of a multilane highway is 60 mph, what is the minimum sight distance that should be provided on the road if (a) the road is horizontal and (b) the road has a maximum grade of 5%? Assume the perception/reaction time is 2.5 seconds...
An uncovered swimming pool loses 1 inch of water off : An uncovered swimming pool loses 1 inch of water off its 1,000ft^2 surface each week due to evaporation. the heat of vaporization for water at the pool temperature is 1,050 Btu/lb
Calculate the required hourly feed rate of oil in gallons/h : A 50,000 L/day stream of wastewater must be heated from 15 degrees celsius to 40 degrees celsius for a treatment process to work properly. at what rate must we put heat into the stream? assume that wastewater has thermal properties exactly like pure ..

Reviews

Write a Review

Civil Engineering Questions & Answers

  On five-cycle semilogarithmic paper plot the grain size

on five-cycle semilogarithmic paper plot the grain size distribution curves from the following mechanical analysis data

  Dram and sketch the system. include coordinate system

A plate is pulled upward from a pool of liquid with velocity, V, entering a thin liquid film on the surface of the plate. The flow is assumed to be laminar and the film thickness

  What mass of pac must be placed in a contact basin

If the toluene concentration in the water supply is 1,000 ppb, the treatment objective is 5 ppb, and the flow of water is 378 L/min (100 gpm), what mass of PAC must be placed in a contact basin on a daily basis to satisfy the treatment objective

  How many kilowatt-hours of electricity would be saved

Suppose the utility encourages its customers to replace their 75-W incandescents with 18-W compact fluorescent lamps (CFL) that produce the same amount of light. Over the 10,000-hr lifetime of a single CFL,

  Who has been offered a 5-year contract at a remote location

Suzanne is a recent chemical engineering graduate who has been offered a 5-year contract at a remote location. She has been offered two choices. The first is a fixed salary of $75,000 per year.

  What would the horizontal distance between the two point be

The terrain in the in the immediate area does not allow for level measuring area. if the suveyour verifiies the diffence in elevation between the point measured from. and the point measured to, as 8.93 feet,

  Find the steady-state concentration if the air is assumed to

Consider the air over a city to be a box 100 km on a side that reaches up to an altitude of 1.0 km. Clean air is blowing into the box along one of its sides with a speed of 4 m/s.

  Find the concrete cross-section and steel area required

Find the concrete cross-section and steel area required for a simply supported rectangular beam with a span of 20 ft that is to carry a computed dead load of 1.3 k/ft and a service live load of 2.25 k/ft.

  Find corresponding racing speed and drag on the car

A one tenth scale model of a soap box derby car is tested in a wind tunnel. The air speed in the wind tunnel is 70m/s, the air drag on the model car is 240 N, and the air temperature and pressure are identical to those expected

  Compute both wet and dry unit weights of compacted specimen

A compaction test was conducted in a soils laboratory, and the standard proctor compaction procedure (ASTM D698) was used. The weight of a compacted soil specimen plus mold was determined to be 3815 g.

  A freeway on a level terrain carries a volume

A freeway on a level terrain carries a volume of 4500 veh/hr onfour 11-foot lanes in one direction. the vehicle mix is 75%passenger cars, 10% trucks, 10% buses and 5% recreational vehicles.lateral obstructions are located at a distance of 5 ft on the..

  Calculate an estimate of the friction coefficient of steel

A fellow I know wanted to know the coefficient of friction between steel and commercial carpet. The value was not in the tables of any textbook he had, so he devised an experiment.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd