Find when and the distance that a catches up with b

Assignment Help Civil Engineering
Reference no: EM13559343

Two objext A and B are moving along the same line. At the time t=0, B is 75ft ahead of A. The acceleration of A is 1.8ft/s^2 and the acceleration of B is -1.3ft/s^2. The velocity of A is 32ft/s and the velocity of B is 51ft/s.

Find (a) when and the distance that A catches up with B and (b) the velocity of A and the velcoity of B at that time.

Reference no: EM13559343

Questions Cloud

Find the pollutant concentration leaving each pond : The two-pond system shown below is fed by a stream with a flow rate of 1.0 MGD and a non-conservative pollutant concentration of 20.0 mg/L. The rate of biological consumption is 0.3 day-1.
At what point on the expressway should the motorist : A motorist traveling at 55 mph on an expressway intends to exit from the expressway using an exit ramp with a maximum allowable speed of 30 mph. At what point on the expressway should the motorist step on her brakes in order to reduce her speed to th..
Determine the drivers perception/reaction time before : A test of a driver’s perception/reaction time is being conducted on a special testing track with wet pavement and a driving speed of 55 mph. When the driver is sober, a stop can be made just in time to avoid hitting an object that is first visible 52..
What distance away from the truck was he when he first : A motorist traveling at 55 mph down a grade of 5% on a highway observes an accident involving an overturned truck ahead of him which completely blocked the road
Find when and the distance that a catches up with b : Two objext A and B are moving along the same line. At the time t=0, B is 75ft ahead of A. The acceleration of A is 1.8ft/s^2 and the acceleration of B is -1.3ft/s^2. The velocity of A is 32ft/s and the velocity of B is 51ft/s.
How do you classify a structure as determinant : If the design speed of a multilane highway is 60 mph, what is the minimum sight distance that should be provided on the road if (a) the road is horizontal and (b) the road has a maximum grade of 5%? Assume the perception/reaction time is 2.5 seconds...
An uncovered swimming pool loses 1 inch of water off : An uncovered swimming pool loses 1 inch of water off its 1,000ft^2 surface each week due to evaporation. the heat of vaporization for water at the pool temperature is 1,050 Btu/lb
Calculate the required hourly feed rate of oil in gallons/h : A 50,000 L/day stream of wastewater must be heated from 15 degrees celsius to 40 degrees celsius for a treatment process to work properly. at what rate must we put heat into the stream? assume that wastewater has thermal properties exactly like pure ..
How far must the plug be compressed downward in order to do : The plug has a diameter of 30 mm and fits within a rigid sleeve having an inner diameter of 32 mm. Both the plug and the sleeve are 50 mm long. Determine the axial pressure p that must be applied to the top of the plug to cause

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the distance upstream from the point of entry

A clean-earth channel, for which n=0.020, is 6m wide and lies on a slope of 0.005236. Water flows at 30m3/s through the channel and enters a reservoir. The water depth in the channel, just before the entry to reservoir, is 3m.

  What is the friction force under each of the blocks when

A stepped shaft ACB having a solid circular cross sections with two different diameters is held against rotation at the ends. If the allowable shear stress in the shaft is 60MPa, what is the maximum torque (To)max that may be applied at section C?

  Explain how to calculate the mass flowrate in methane

Assuming the resulting hole acts like an isentropic converging nozzle with a throat diameter of 0.08 cm, calculate the mass flowrate in kg/s of methane that initially escapes from the tank.

  What is the distribution reinforcement percentage of area

What is the Distribution reinforcement percentage of area ? Hot to take it for the calculation of distribution reinforcement in dog-legged stair case.

  Design a hollow steel shaft with an inside diameter

Design a hollow steel shaft with an inside diameter 1/3 that of the outside diameter. The shaft transmits 200 kW at a speed of 20 Hz. The allowable shearing stress is 55 MPa, and the allowable angle of twist is 1 degree per meter of length.

  Find the solution of the ivp by solving the de

After the Christmas break one student returns carrying a flu virus. Assume that the rate at which the virus spreads is proportional to the number of infected students P(t), but also to the number 5000P(t) of students not yet infected.

  Determine flow rate of water that will cause a pressure drop

Determine the flow rate of water (20 degrees celcius) that will cause a pressure drop of 17250 N/m^2 in 350m of horizontal, cast-iron pipe (d=60cm). assume minor losses are negligibe

  Determine horizontal component of reaction that pin exert

Determine the horizontal component of reaction that the pin A exerts on the two-member frame. Set F = 500 (Find Ax) Determine the vertical component of reaction that the pin A exerts on the two-member frame.

  What height difference is needed to generate the flow

A siphone generates a flow of 1 ft/sec thru a 1 inch OD, 3/4 ID hose. A) What height difference is needed to generate this flow B) What height for 10 ft/sec C) What for 100 ft/sec

  Determine the maximum tensile and compressive bending stress

A rectangular tube has an outside dimensions that are 2in wide and 4in deep and a wall thickness of 0.25in. The tube is acted on by a bending moment of 12,000lb-in. A.)Determine the maximum tensile and compressive bending stresses.

  Property rights along bodies of water vary from

Property rights along bodies of water vary from the the thread of the stream to high water marks, and is based upon the navigability of the body of water and state law (true or false)?

  Find the mole fraction and mass fraction of each component

A gaseous mixture of carbon monoxide, carbon dioxide, methane and nitrogen gas is analyzed with a gas chromatograph (GC). The output takes the form of a series of peaks where each peak corresponds to a component and a peak area (A) is proportional to..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd