Give the multiplicative constant for the kinetic

Assignment Help Civil Engineering
Reference no: EM13560327

Give the multiplicative constant for the kinetic, potential, thermal, and magical energy terms of the equation:

E(total) = E(kinetic) + E(potential) + E(thermal) + E(magical)

such that E(total) has units of Joules. Assume that kinetic energy = 1/2mv^2, potential energy = mgh, thermal energy = number, magical energy = ObamaCoef*volume*pressure.

KE: parsecs, lbm, shake

PE: smoot, milligrams, jiffy

TE: BTU

ME: torr, cubic fathoms

Reference no: EM13560327

Questions Cloud

Determine the maximum normal stress and the maximum shearing : A spherical gas container made of steel has a 5-m outer diameter and a wall thickness of 6 mm. Knowing the internal pressure is 350 kPa, determine te maximum normal stress and the maximum shearing stress in the container.
Find los and speed within the ramp influence area and the : Find: LOS and speed within the ramp influence area and the outer freeway lanes (one-ramp is followed by off-ramp)
Understanding of marketing and secondly : Understanding of marketing and secondly
Hierarchy of goals : 1.Take any company of your choice and explain your viewpoint on its hierarchy of Goals.It should include Vision, Mission, Goals, Objectives, Plans and Policies.
Give the multiplicative constant for the kinetic : Such that E(total) has units of Joules. Assume that kinetic energy = 1/2mv^2, potential energy = mgh, thermal energy = number, magical energy = ObamaCoef*volume*pressure.
How do retailers like david jones add value to the marketing : How do retailers like David Jones add value to the marketing system? Does an online retailer like Scorptec add value in the same manner?
How many of the 15 access points must be blocked to achieve : A four- lane undivided multilane highway ( two lanes in each direction) has 11- ft lanes and 5- ft shoulders. At one point along the highway there is a 4% upgrade that is 0.62 mi long.
Strategy and complex adaptive systems : Strategy and Complex Adaptive Systems
Estimate the radon concentration in the crawl space : The house has a dirt-floor crawl spaces (1m high). The emission rate of radon into the crawl space is 0.6 pCi/m^2-s. An exhaust system was added to provide 1 air exchange per hour (ACH) in the crawl space

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the normal depth of flow before and after the

Determine the normal depth of flow before and after the change in gradient. Will it be possible to produce a hydraulic jump in the channel downstream of the junction of two slopes?

  Determine what is the change in the wires total resistance

You have two wires connected end to end. Wire 1 is copper and wire 2 is made using a special carbon conductor. Wire 1 has a resistance of 0.215 ohms/ft and is 500 ft long. Wire 2 has a resistance of 0.141 ohms/ft and is 700 ft long.

  Find pipe diameter if it is to be full with steady rainfall

Rainwater runoff from a 200 x 500 ft parking lot is to drain through a circular concrete pipe that is laid on a slope of 5 ft/mi. Determine the pipe diameter if it is to be full with a steady rainfall of 1.5 in/hr

  Determine the cycle time for a single engine scraper

Determine the cycle time for a single engine scraper rated at 21 cy heaped that is used to haul material from a pit to a fill 900 ft away under severe conditions.

  What will the cars maximum acceleration be on a level road

The car's gear reduction ratio is 3.5 to 1, driveline efficiency is 90%, driveline slippage is 3.5%, and the road-wheel radius is 15 inches. What will the car's maximum acceleration be under these conditions on a level road

  Find the initial velocity of the bullet before hit the tree

A 9 gram bullet is fired horizontally at a tree and is brought to a halt right before it exits the tree. the tree is 90cm thick and exerts a resistive force of 16000N on the bullet as it travels through the tree

  Determine the required height h of the roller coaster so

determine the required height h of the roller coaster so that when it is essentially at rest at the crest of the hill

  Determine the maximum static stress the component must

The heat resisting alloy S-590 is used for a component that will be exposed to 700°C. With a safety factor of two on the time, determine the maximum static stress the component must sustain in order to have a service life of 10000 hours.

  What is the mach number of the flow around the aircraft

A jet aircraft flies at a speed of 600 mph at an altitude of 40,000 ft. The atmosphere is the standard atmosphere. (1) What is the air pressure outside the aircraft (2) What is the Mach number of the flow around the aircraft

  Calculate max bending stress and shear stress in the pole

A Timber power-line pole is 10 in. in diameter at its base where it is solidly embedded in concrete. The pole extends 20 ft vertically upward from its base and is subjected to a horizontal pull of 300 lb at its top.

  Find velocity of each block knowing the relative velocity

The three blocks shown move move with constant velocities. Find the velocity of each block, knowing that the relative velocity of A with respect to C is 300 mm/s upward and that the relative velocity of B with respect to A is 200 mm/s downward.

  What is the main objective of nasas mars science laboratory

Q. What is the main objective of NASA's Mars Science Laboratory (MSL) mission? When was it launched and when and where is it scheduled to land on Mars? Explain the major differences between this mission and Mars Exploration Rovers (MER) mission?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd