Find los and speed within the ramp influence area and the

Assignment Help Civil Engineering
Reference no: EM13560330

Find: LOS and speed within the ramp influence area and the outer freeway lanes (one-ramp is followed by off-ramp)

Given:

6-lane freeway

One-lane on-ramp with FFS of 35 mph

On-lane off-ramp with FFS of 30 mph

Distance between ramps = 1,800 ft

Acceleration lane = 250 ft

Deceleration lane = 250 ft

Rolling terrain

8% trucks, 5% RVs on freeway

5% trucks, 2% RVs on ramps

Freeway flow rate (upstream of on-ramp) = 4,200 veh/hr

On-ramp flow rate = 700 veh/hr

Off-ramp flow rate = 500 veh/hr

PHF = 0.98

Commuter traffic

Reference no: EM13560330

Questions Cloud

Business goals and objectives : Business Goals and Objectives
How large of an area would one need to cover with solar cell : Given that the average power plant produces 667 MW of electricity per year, there are 492 coal plants in the US, and a solar constant of 1.361 KW/m^2, how large of an area would one need to cover with solar cells
Walgreen company : Walgreen Company
Determine the maximum normal stress and the maximum shearing : A spherical gas container made of steel has a 5-m outer diameter and a wall thickness of 6 mm. Knowing the internal pressure is 350 kPa, determine te maximum normal stress and the maximum shearing stress in the container.
Find los and speed within the ramp influence area and the : Find: LOS and speed within the ramp influence area and the outer freeway lanes (one-ramp is followed by off-ramp)
Understanding of marketing and secondly : Understanding of marketing and secondly
Hierarchy of goals : 1.Take any company of your choice and explain your viewpoint on its hierarchy of Goals.It should include Vision, Mission, Goals, Objectives, Plans and Policies.
Give the multiplicative constant for the kinetic : Such that E(total) has units of Joules. Assume that kinetic energy = 1/2mv^2, potential energy = mgh, thermal energy = number, magical energy = ObamaCoef*volume*pressure.
How do retailers like david jones add value to the marketing : How do retailers like David Jones add value to the marketing system? Does an online retailer like Scorptec add value in the same manner?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the total resultant force

in inclined circular gate with water on one side shown in the figure. determine the total resultant force acting on the gate and the total location of center pressure.

  Declare a variable, twindow

Double the width of the window, using widen, set the height of the window so that it is the same as the width, and set the title to the new value "Square Window".

  Determine the station where tangent runout starts

The station of a PI of a horizental curve is 60+20. The horizental curve has a degree of 4 and a length of 400ft. the othere given design perameters include. Superelevation runoff rate is 1/400. width of the pavement is is 15ft.

  Determine the spring constant k required for equilibrium

The 81-lb uniform square plate is supported by a ball-and-socket joint at O, a cable at E, a fixture at A which can support vertical force only, and a linear spring at C. If the unstretched length of the spring is 4 in.

  Determine the average density of the material form

The earth's interior comprises three principle regions: the Core (16.4% of the earth's total volume, density= 11.2 kg/L), the Mantle (82% fo the earth's total volume, density= 4.7 kg/L), and the crust (1.6% of the earth's volume

  Determine required diameter of each rod by the concrete

The column is constructed from high-strength concrete and four A-36 steel reinforcing rods. If it is subjected to an axial force of 37.5 kN , determine the required diameter of each rod so that one-fourth of the load is carried by the concrete

  Calculate the resolved shear stress acting on the slip plane

A single crystal of a FCC metal is oriented so that the [001] direction is parallel to an applied stress of 35.0 MPa. Calculate the resolved shear stress acting on the (111) slip plane in the [110], [0-11], [10-1] slip directions.

  Estimate the plume mass flow rate of a pool of benzene

A pool of benzene is ignited on the floor of a large industrial building. The total area covered by the Kerosene pool is 6 meters square (Note that this is considered a large pool D>0.2 meters). Combustion efficiency is 70%. Estimate the plume mas..

  Under what circumstances is there an exception to law

under what circumstances is there an exception to the general law that an identified original section corner controls the positions of the boundary lines meeting at or passing through the corner

  Find how much can the company afford to spend now

Wheeling-Pittsburg steel is investigating whether it should replace some of its basic oxygen furnace equipment now or wait to do it later. The cost later (3 years from now) is estimated to be 1,700,000.

  Heat exchanger second-law efficiency

The condenser in a refrigerator receives R-134a at 700 kPa and 50C, and it exits as saturated liquid at 25 C, The flow rate is 0.1 kg/s,and the condenser has air in at an ambient temperature of 15 C and leaving at 35 C. Find the minimum flow rate ..

  How many liters of biosolids can be applied to an acre

The Biosolids from a wastewater treatment process contains 1 mg cadmium per Kg of dry solids. The biosolids from the plant contain 23% solids and have a specific gravity of 1.01. If the state department of environmental quality has

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd