Determine the maximum normal stress and the maximum shearing

Assignment Help Civil Engineering
Reference no: EM13560331

1.Benefits associated with a project are $10,000 forever starting in year 1. The costs are $20,000 in year 0 and $20,000 in year 3. What is the B/C ratio at i=12% per year. First determine present worth for benefit and cost, respectively.

2.Rate the r values in increasing order of polyisocyanurate, expanded polystyrene, extruded polystyrene, glass fiberboards, lightweight concrete fill

3.A spherical gas container made of steel has a 5-m outer diameter and a wall thickness of 6 mm. Knowing the internal pressure is 350 kPa, determine the maximum normal stress and the maximum shearing stress in the container.

Reference no: EM13560331

Questions Cloud

What is the minimum number of filters required by plant : A conventional water treatment plant treats 2.40m^3*s^-1 of river water. The filters in the plant are 8.0x8.0m surface area and operate on the following schedule. A filter is cleaned once in each 24-hr period
Business goals and objectives : Business Goals and Objectives
How large of an area would one need to cover with solar cell : Given that the average power plant produces 667 MW of electricity per year, there are 492 coal plants in the US, and a solar constant of 1.361 KW/m^2, how large of an area would one need to cover with solar cells
Walgreen company : Walgreen Company
Determine the maximum normal stress and the maximum shearing : A spherical gas container made of steel has a 5-m outer diameter and a wall thickness of 6 mm. Knowing the internal pressure is 350 kPa, determine te maximum normal stress and the maximum shearing stress in the container.
Find los and speed within the ramp influence area and the : Find: LOS and speed within the ramp influence area and the outer freeway lanes (one-ramp is followed by off-ramp)
Understanding of marketing and secondly : Understanding of marketing and secondly
Hierarchy of goals : 1.Take any company of your choice and explain your viewpoint on its hierarchy of Goals.It should include Vision, Mission, Goals, Objectives, Plans and Policies.
Give the multiplicative constant for the kinetic : Such that E(total) has units of Joules. Assume that kinetic energy = 1/2mv^2, potential energy = mgh, thermal energy = number, magical energy = ObamaCoef*volume*pressure.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the change in the bottom elevation and the water

A hydraulic transition 100 ft long is used to connect two rectangular channels, 12ft and 6ft wide. The design discharge is 500 cfs, mannining coefficient=.013 and the slopes of the channels are both .0009.

  Determine the largest allowable length of the aluminum bar

Using the aluminum alloy 2014-T6, determine the largest allowable length of the aluminum bar AB for a centric load P of magnitude (A) 150 kN b=50 mm h=20 mm

  Calculate as many principal or maximum strains

The direct strain at an angle of 30o,to one of theprincipal axes was 1.34x10-3 and the corresponding shearstrain was 8.52x10-4. Calculate as many principal or maximum strains at the point

  What is the minimum coefficient of road adhesion needed

The owners wish to achieve an initial acceleration from rest of 22 ft/(sec^2) on a level paved surface. What is the minimum coefficient of road adhesion needed to achieve this acceleration

  Determine what is the pressure at point a

Water flows through a 4-cm pipe, wrought iron, horizontal pipeline 50-m long from point A to B, and contains a fully opened gate valve and two elbows (R/D = 4).

  Determine the cratess velocity when the crate reaches point

If the force is removed when the crate reaches point B, and the crate is then released from rest, determine the crates's velocity when it slides back down the plane and reaches point A.

  Determine the magnitude of the resultant force

A four story office building ha interior columns that are spaced 30ft apart in two perpendicular directions. If the flat-roof loadingis estimated to be 30 lb/ft2 , determine the reducedlive load supported by a typical interior column at ground level.

  What is the elevation of point q

The slope distance and zenith angle measured from point P to pointQ were 1876.253m and 87.33'24 degrees, respectively. The instrumentand rod target heights were equal. If the elevation of point P is227.965m, above datum, what is the elevation of poin..

  Determine perpetual equivalent annual worth at interest rate

The cash flow associated with landscaping and maintaining a certain monument in Washington, D.C., is $100,000 now and $50,000 every 5 years forever. Determine its perpetual equivalent annual worth (in years 1 through infinity)

  Determine the specific gravity of the sand

A cylinder has 500cm^3 of water. After a mass of 100 grams of sand is poured into the cylinder and all air bubbles are removed by a vacuum pump, the water level rises to 537.5 cm^3. Determine the specific gravity of the sand.

  Calculate the required downpayment and monthly payments

Terry wants to purchase a used car for $8000. The dealer offered to finance the deal at 8.5% APR for 4 years with 10% down payment. Terry's bank will provide a loan at 7.8% for 3 years,

  Determine the ultimate bod and 5-day bod of the sample

A result of a 7-day BOD test performed on a sample from anoligotrophic lake was 10 mg/L. The base 'e' BOD rate constantdetermined from previous studies was estimated to be 0.10d-1.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd