Center of the instrument and the target and the elevation

Assignment Help Civil Engineering
Reference no: EM13536743

Stadia is used to estimate the distance from the instrument to a target. Using inclined sights the horizontal distance and vertical distance between the center of the instrument and the target and the elevation of the rod can be determined.

1) determine the horizontal distance, given:Stadia Top=8.5 ,Stadia Bottom 6.21, vertical angle= -8 degrees 42 minutes.

2)If the ground elevation at the instrument is 2045' msl (mean sea level), what is the ground elevation at the rod?

Reference no: EM13536743

Questions Cloud

Write and expression for a in terms of b that makes : For the following velocity profiles state whether they are steady or unsteady and whether they are 1-D, 2-D or 3-D.
Find the inititial population : A 5 cm diameter, 6 m high pole is fixed in concrete. The pole supports a circular 4 m diameter sign. Estimate the maximum moment that must be resisted by the concrete for a wind speed of 30 m/s (wind is assumed normal to the sign; density of air = 1...
Find the tensions in both sides of the rope for someone walk : You are given that a piece of rope is 90.5 ft long. The distance between the poles holding the rope is 90 ft. We are to find the tensions in both sides of the rope for someone walking across the rope and the deflection
What are dtm and dem what is the difference between them : If the stage of a stream increases by 40% and the slope of the water surface becomes half of its original slope, then what will be changes in discharge of the stream?
Center of the instrument and the target and the elevation : Determine the horizontal distance, given:Stadia Top=8.5 ,Stadia Bottom 6.21, vertical angle= -8 degrees 42 minutes.
Property rights along bodies of water vary from : Property rights along bodies of water vary from the the thread of the stream to high water marks, and is based upon the navigability of the body of water and state law (true or false)?
Which the original 13 colonies were surveyed : Fixed GPS broadcast stations enable users to make differential measurements to other points whose positions are needed. In the US, there are two such networks two such networks of broadcast stations, name one (blank)
Imaging you have to shoot a basketball ball : Part B (Assignment): by trial and error, find the angle that will give the minimum force F to make a basket (hint: try 52 degrees)The trajectory of the ball will make a basket when x = L and y = Hb
How do you fill out the moment distribution : How do you fill out the moment distribution table? I dont know how to compute the values for each cell as the node is locked and un-locked.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the critical depth with a bottom width

a channel which has a trapezoidal cross-section with a bottom width of 6 m and side slopes 1:2 discharges water at a rate of 5 m3/s. Determine the critical depth.

  Design the weir structure in order to accommodate the design

The channel cross section is rectangular in shape,with a bed width of 4 m and Manning n of 0.022. The bed drops by an average of 4.2metres every kilometre. The maximum flow in the channel is equal to 7 m3/s.

  Draw to scale the expected streakline of the stream

The following wind conditions are expected: V = 10 i - 5 j mph for 0 10 hr. Draw to scale the expected streakline of the stream  for t = 3, 10, and 15 hr.

  How to determine the force that must be applied at a

The uniform load has a mass of 450 and is lifted using a uniform 35- strongback beam and four ropes. Determine the Tension in the ropes Determine the force that must be applied at A.

  Assuming the entire system has reached equilibrium what is

assuming the entire system has reached equilibrium what is the distance that must be used between the inputs shown and

  Explain why a secant touches a circle at one point

1. The three isometric axes are: vertical and two axes 30 degrees from horizontal. 2. Oblique projection is a perspective projection method. 3. Isometric view represents a parallel projection method.

  Explain how to evaluate the coefficient of performance

0.1 moles of an ideal gas contained in a piston-cylinder assembly undergoes the heat pump cycle shown below. The cycle operates counter-clockwise. Evaluate the coefficient of performance.

  Determine the shear force and bending moment diagrams

a 200 lb divers stands on the end of the diving board. determine the shear force and bending moment diagrams

  Calculate the true stress for fracture in the neck region

A copper wire breaks under an engineering stress of 43x10^3 psi. Its ductility is 77%it reduction area. Calculate the true stress (in psi) for fracture in the neck region.

  Determine correspondig angular acceleration alpha of beam

determine the correspondig angular acceleration alpha of the beam, the acceleration of C, and the distance b from B to a point P on the beam centerline which has no acceleration

  Determine air pressure at the top of a 300 m high building

Determine the air pressure at the top of a 300 m high building by assuming the density of air stays constant at the z = 0 value. Now compute the pressure assuming the density of the air varies. Is there a significant difference.

  Determine the velocity of the 30 kg block a from rest

determine the velocity of the 30 kg block A if two block are released from rest and the 20 kg block B moves 0.6 m up the incline. the coefficient of kinetic friction between both blocks and the inclined plane is 0.10

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd