Assuming the entire system has reached equilibrium what is

Assignment Help Civil Engineering
Reference no: EM13384410

Assuming the entire system has reached equilibrium : What is the distance that must be used between the inputs shown and the water withdrawal such that the concentration withdrawn is 1 mg/l? Suppose that the distance from the lake outlet to the withdrawal cannot be more than 20 mi. What should be the new volume of the lake?  

Reference no: EM13384410

Questions Cloud

A mixture of 1374 g of h2 and 7031 g of br2 is heated in a : a mixture of 1.374 g of h2 and 70.31 g of br2 is heated in a 2.00-l flask at 700 k. the following equilibrium is
Samples of 20 rivets for a steel structure are checked for : samples of 20 rivets for a steel structure are checked for quality every hour.the probability of finding a bad rivet
Which of the following obey the octet rule beh2 ccl3 seo2 : which of the following obey the octet rule beh2 ccl3 seo2 2- pcl3 krcl2 no2? and if they do not obey the octet rule
If 400 grams of water at an initial temperature of 100 : if 4.00 grams of water at an initial temperature of 1.00 degrees c absorbs 33.00 joules of heat by how many degrees c
Assuming the entire system has reached equilibrium what is : assuming the entire system has reached equilibrium what is the distance that must be used between the inputs shown and
How many grams of na3po4 will be needed to produce 400 ml : a scientist watns to make a solution of tribasic sodium phosphate na3po4 for a laboratory experiement. how many grams
A cm reactor receives influent containing 100 mgl of tracer : a cm reactor receives influent containing 10.0 mgl of tracer for 2 h. then tracer addition is terminated but the flow
117 gram sample of a metal reacts with hyrdochloric acid to : 117 gram sample of a metal reacts with hyrdochloric acid to produce 36.3 ml of dry hydrogen gas measured at stp. what
Starting with only the solid it is found that 40 degrees : ammonium carbonate nh4co2nh2 decomposes as followsnh4co2nh2sltgt 2nh3g co2gstarting with only the solid it is found

Reviews

Write a Review

Civil Engineering Questions & Answers

  Pulling automobile by means of two ropes

A disabled automobile is pulled by means of two ropes as shown. The tension in AB is 400 lb and the angle is 20. knowing that the resultant of the resultant of the two forces applied at A is directed along the axis of the automobile, determine by ..

  Find what is the expected compression of the 4 springs

The undercarriage for an aircraft uses two springs between each wheel and the aircraft fueselage to cuhion the landing of the aircraft. There are two sprung wheels and the mass of the aircraft is 5000kg

  How to determine the two possible depths of flow

A 200 m wide natural stream, whose cross-section can be approximated by a rectangular cross-section, contains a dischargeof 80 cumecs. If the specific energy of the flow is 1.5 timesthe minimum specific energy

  How far from shore is a sailboat from view of a person

On a large lake without waves, how far from shore is a sailboat when the top of its 8m mast disappears from view of a person whos eye height is 1.5 m above the waters edge

  Determining optimal solution

The company would like to distribute the songs between the two CDs such that the used space on each CD is about the same. Formulate the problem as an IP, and find the optimal solution.

  Determine the hydraulic conductivity of the soil

In a constant-head permeability test a sample of soil12 cm long and 6 cm in diameter discharged at 1.5*10^-3 of water in 10 minutes. The head difference in two piezometers A and B located at 1 cm and 11 cm, respectively

  Determine the minimum theoretical wall thickness

compressed nitrogen (140 lbm) is stored in a spherical tank of diameter D = 2.5 ft @ temp. of 77 degrees Fahrenheit . what is the pressure inside the tank? if the max allowable stress is 30 ksi, find the minimum theoretical wall thickness.

  Define which needs to be shafts minimum diameter

Assuming that the soil layers continue much beyond 60 feet in a similar pattern (obviously no landfill) in terms of friction and bearing capacities, recommend two different solutions that could allow the shafts to transmit their loads by 1) end be..

  Develop an estimate of the volumetric flow rate of air

Develop an estimate of the volumetric flow rate of air that will be required for aeration of the mixed liquor in an activated sludge system.For this calculation, assume that the (ultimate) CBOD is 200 mg/L and (ultimate) NBOD is 50 mg/L.

  Determine the flow rate of a 2-inch diameter glass pipe

A 2-inch diameter glass pipe is connected to a pipe network in which the pressure is 70 psig. If the length is 300 ft and the outlet is 10 ft above the pipe, determine the flow rate.

  Highest point of the piping system

a) The maximum flow rate that can be achieved without cavitation occurring in the piping system. b) The maximum elevation of the highest point of the piping system to avoid cavitation.

  Which has the larger hydraulic radius and by what percentage

Two pipes, one circular and one square, have the same cross-sectional area. Which has the larger hydraulic radius, and by what percentage

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd