What is the normal depth in a 4-foot wide rectangular

Assignment Help Civil Engineering
Reference no: EM13549257

1.In MATLAB when a function is called, how is data passed from the caller to the function, and how are the results of the function returned to the caller

2.A rough concrete rectangular channel with a bottom width of 8 feet drops 1 foot in a 3 mile stretch conveys a discharge of 100,000 gpm. Assume n = 0.016. Compute the critical depth in the channel

a).0.9 feet

b).1.7 feet

c).2.9 feet

d).4.6 feet

3.A trapezoidal channel with a bottom width of 4 feet and side slopes 2:1 (H:V) and a bed slope of 1 percent conveys a discharge of 50,000 gpm. Assume n = 0.025. Compute the normal depth

a).0.84 feet

b).2.1 feet

c).3.7 feet

d).5.1 feet

4.What is the normal depth in a 4-foot wide rectangular channel that conveys a discharge of 100 CFS and has a bed slope of 2% with a Manning’s roughness coefficient of 0.025?

a).1.3 feet

b).2.7 feet

c).4.4 feet

d).6.2 feet

Reference no: EM13549257

Questions Cloud

Estimate the lateral strain experienced by the bar : A 1.0-m rigid horizontal support is hung by two cables as shown. One cable is brass and The other cable is high-density polyethylene plastic. At room temperature (21°C), the cables measure 3.50 m vertically. When the temperature drops to 15°C, find t..
Determine the torque that develops in the rod : The end of a 0.75-in-diameter rod is fixed to an immovable plate as shown. The length of the rod is 18.0 in. A 50-lb weight is attached to a 16.0-in lever at the end of the Rod so that the weight is hanging perpendicular to the longitudinal axis of t..
The change in length of the cable when the beam is under : A 4-m-long rigid beam is supported by a pinned connection and cable. the beam weighs 2.0 kn and hangs horizontally when unloaded When the beam is not loaded the solid cable is 4.00 m long and has a solid area of 175 mm1
What will the ammonia concentration be 10 miles downstream : The concentration of ammonia is 6 mg/L at one point in the river. If the first – order decay coefficient for the conversion of ammonia to nitrate is 0.05 day-1, what will the ammonia concentration be 10 miles downstream.
What is the normal depth in a 4-foot wide rectangular : What is the normal depth in a 4-foot wide rectangular channel that conveys a discharge of 100 CFS and has a bed slope of 2% with a Manning’s roughness coefficient of 0.025? a).1.3 feet b).2.7 feet c).4.4 feet d).6.2 feet
How many gallons would be required to last the same time : How many gallons would be required to last the same time as the gas? The sodium hypochlorite solution strength is 15 percent by weight and has the same unit weight as water (specific gravity 1.0). One pound of sodium hypochlorite has the same disinfe..
What concentration would correspond to a risk : The drinking water standard for dioxin is 3 x 10-8 mg/L. Using EPA exposure factors for residential consumption, what lifetime risk would this pose? What concentration would correspond to a risk of 10-6? The following data and assumptions apply: Data..
What is the volume of the lake in cubic feet : A shallow lake can be considered a CFSTR. Nitrification, the conversion of ammonia to nitrate (NH3 -> NO3-) occurs in the lake according to first – order kinetics. One stream feeds the lake and one stream empties the lake with the flow rate in both b..
Friction between the floor and the base of the ladder : Modify function random0 so that it can accept 0, 1, or 2 calling arguments. If it has no calling arguments, it should return a single random value. If it has 1 or 2 calling arguments, it should behave as it currently does.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compute the magnitues of all the forces acting on member

Compute the magnitues of all the forces acting on member CDE of the frame. There are pins at C D and E and an 80 kelp force on the right. Length measurements are in ft.

  Determine magnitude of force p acting on crate and ground

If the 50 kg crate starts from rest and travels a distance of 6m up the plane in 4s, determine the magnitude of force P acting on the crate. The coefficient of Kinetic friction between the crate and the ground is 0.25

  Determine at the instant the angular velocity of each link

Two links AB and B, each 25 in. long are connected at B and guided by hydraulic cylinders attached at A and D. Knowing that D is stationary and that the velocity of A is 30 in./s to the ight

  What is the maximum internal pressure for the maximum stress

If the maximum stress that the tank can sustain equals 22.857 ksi, determine the required thickness (to the nearest 1/4 inch). If the tank wall thickness is specified to be 2.25 inches.what is the maximum internal pressure

  Why sludge system is operated at relatively low flood ratio

State the two main reasons why an activated sludge system is operated at a relatively low food/microorganism ratio.

  A simple rankine cycle uses water as the working fluid the

a simple rankine cycle uses water as the working fluid. the boiler operates at 6000 kpa and the condenser at 50 kpa. at

  Determine the theoretical discharge

A vertical triangular orifice in the wall of a reservoir has a base 0.9m long,0.6m below its vertex and 1.2 m below the water surface. Determine the theoretical discharge?

  Compute how many grams of water must be added to soil

it has been calculated that the maximum density for the soil will be obtained when the water content reaches 21.5%. Compute how many grams of water must be added to each 1000g of soil( in its natural state) in order to increase the water content 2..

  Calculate the deflection angle from the tangent at the pc

The P.C. of a 3 degree curve, whose degree is based on a chord of100 ft. arc, is at Sta. 19+39.60 and the P.T is at Sta. 25+64.60. Calculate the deflection angle from the tangent at the P.C

  Derive an expression for number of rev executed by the disk

Disk A of constant thicness and is at rest when it is placed in contact with belt BC, which moves with constant velocity v. Denoting by uk the coefficient of kinetic fr4iction between the disk and the belt.

  Determine the distance that the piston is displaced

a vertical 12-cm diameter piston-cylinder device contains an ideal gas at the ambient conditions of 1 bar and 24 degrees C. Initially, the inner face of the piston is 20 cmfrom the base of the cylinder.

  Assuming the entire system has reached equilibrium what is

assuming the entire system has reached equilibrium what is the distance that must be used between the inputs shown and

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd