What is friction of k and how does it work into the reaction

Assignment Help Civil Engineering
Reference no: EM13552921

A 400 lb crate is on a 20 degree incline. If a 120 lb horizontal force (P), pushes on the crate (upwards), determine the normal and frictional forces acting on the crate. Take friction of surface = 0.3 and friction of k = 0.2? What is "friction of k" and how does it work into the reaction equations?

Reference no: EM13552921

Questions Cloud

Determine this deflection and the proper offset d : The two I-beams are welded together and are initially supported by the three cables of equal length hanging vertically from supports directly above A, B, and C. When applied with the appropriate offset
Classify the jump type and calculate the energy lost : A rectangular channel of width 12 ft has an upstream slope of 0.02 ft/ft and a downstream slope of 0.0005 ft/ft. Both reaches have lengths of 500 ft. The upstream reach has a Manning's roughnes
Find the maximum bending stresses : A simply supported composite beam 3m long carries a uniformly distributed load of intensity q=3.0kN/m. the beam is constructed of a wood member, 100mm wide by 150mm deep
What will it be after consolidation is completed : The current vertical stress at a point in a saturated clay is 181 kPa. This soil is to be covered with a 2.5m thick fill that will have a unit weight of 19.3 kN/ m^3. What will be the value of the vertical
What is friction of k and how does it work into the reaction : A 400 lb crate is on a 20 degree incline. If a 120 lb horizontal force (P), pushes on the crate (upwards), determine the normal and frictional forces acting on the crate. Take friction of surface = 0.3 and friction of k = 0.2?
Determine the location of the hydraulic jump relative : A rectangular channel of width 12 ft has an upstream slope of 0.02 ft/ft and a downstream slope of 0.0005 ft/ft. Both reaches have lengths of 500 ft. The upstream reach has a Manning's roughness of 0.016 and the downstream reach has a roughness of 0...
Find the hydraulic conductivity of the aquifer : A confined aquifer 30 m thick has been pumped from a fully penetrating well at a steady rate of 5000 m3/day for a long time. Drawdown at an observation well 15 m from the pumped well is 3.0 m
Who else was there at the time and how they might have : Develop a timeline up to 1900 with considerable expansion of Henry Martyn Leland's work at The Springfield Armory, Colt, Brown & Sharpe, and L & F (in Detroit)
What do will result if the concentration of the waste : The discharge from the Renenutet sugar beet plant causes the DO at the critical point to fall to 4.0 mg/L. The Meskhenet Stream has a negligible BOD and the initial deficit after the river and wastewater have mixed is zero

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the elastic and plastic section modulus of i-beam

Determine the elastic and plastic section modulus of the I-beam. The axis runs through the center of the beam on both x and y axis (completely symmetrical). Beam properties: h= 12inches tf= 0.5 inches bf= 6 inches tw= 0.25 inches

  Determine maximum allowable compressive force can be applied

The force is applied at the two pins. The pins allow rotation around the z-axis and do not allow rotation around the y-axis. The length of the beam between the pins is 8m. Determine the maximum allowable compressive force that can be applied.

  Plot the do from point of discharge to 20 days downstream

The river characteristics just upstream of the wastewater discharge are: flow = 7.5 m3/s, BOD = 5.5 mg/L, DO = 90% of saturation, and temperature = 25oC. For this water, kd = 0.18 d-1 and kr = 0.22 d-1.

  Determine the average normal stress in the links

Determine the average normal stress in the links

  Find the total head loss if the flow velocity

Water at 72 degress Fahreneit flows through a 110-ft-long, 5-in-diameter wrought-iron pipe that contains the following fittings: one open globe valve, one medium-radius elbow

  Determine the magnitude of the velocity and acceleration

If the blades are originally at rest and begin to turn with a constant angular acceleration of ac = 0.5 rad/s^2, determine the magnitude of the velocity and acceleration of points A and B on the blade when t = 4s.

  Why the acidic deposition is damaging the valuable forest

A power plant situated 20 km directly upwind from a protected old-growth forest emits SO2 at a rate of 120 g s-1with an effective stack height of 100 m (uH= 2 m s-1). Environmentalists claim that the acidic deposition is damaging the valuable fore..

  Determine the internal normal force at point e in

Battered piles are used on many construction projects as a permanent part of the element being constructed. Does this construction method have any play in the construction of a temporary earth retention system?

  Determine the maximum displacement of the plate

Determine the maximum displacement of the plate A if the billet strikes the plate with a speed of 8 . Neglect the mass of the springs, rollers and the plates A and B. Take = 4000 , = 40000 .

  The existing flash mixer is about 20 years old and needs to

an existing water treatment plant is producing an average flow of 0.5 mgd. due to several limitations the plant only

  What is the lowest pressure expected in the prototype

A dam spillway is to be tested using kinematic similitude (Froude scaling) with a 1:20-scale model. The model flow has an average velocity of 0.7 m/s and a flow rate of 0.06 m3/s.

  Determine the worked deeloped

Air enters a turbine operating at steady state at 8 bar, 1127 C and exits at 1.5 bar, 347 C. The heat transfer from the turbine to its surroundings is 10 kJ/kg of air flowing through the turbine. Neglecting kinetic and potential energy changes and as..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd