Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
1.An air turbine is used with a generator to generate electricity. Air at the turbine inlet is at 700 kPa and 25 degree C. The turbine discharges air in to the atmosphere at a temperature of 11 degree C.Inlet and outlet air velocities are 100 m/s and 2 m/s respectively. Determine the work per unit mass delivered to the turbine from the air.
2.What is differential equation for beams subjected to axial compression,esp.with initial imperfection to the fixed-hinged column?
describe the measurements that would have to be taken and the equations that would have to be used to determine G23, V32, and E2 for a specially orthotropic transversely isotropic material from a single tensile test.
A solid shaft with a diameter of .75 in. The subject is torqued at B(35lb*ft clockwise), C(20lb*ft counterclockwise), D(40 lb*ft counter clockwise) and E(25 lb*ft clockwise).
A quartzite sample in a compression testing machine is 180mm long and 54mm in diameter. what is the stress under a load of 100kN? if the modulus of elasticity is 102kN/mm2, find the strain develope in the sample.
The viscosity of a fluid can be measured in an experiment by dropping a small ball into a calibrated tube containing the fluid and observing the random variable X, the time it takes for the ball to drop the measured distance.
A smooth, vertical wall is 25 feet high and retains a cohesionless soil with a unit weight of 115 pcf and an angle of internal friction of 30 degrees. The top of the soil is level with the top of the wall, and the soil carries a uniformly
Discuss how relative motion is a critical issue in the midair refueling of aircraft. Would control of this process be with the pilot of the tanker or the aircraft being refueled
if the velocity of the sled 10 sec from the start is 200mi\hr, determine the time average R of the total aerodynamic and mechanical resistance to motion. neglect the loss of mass due to exhausted fuel compared with the mass of the sled
Determine the runoff rate at t = 15.0 hr from a two storm system if the first storm drops 2.0-inches starting at t = 0, and the second storm drops 5.0-incheds starting at t = 12.0 hrs.
For load combination 1.2D + 1.6L, determine the maximum negative moment in each span and maximum negative moment at each support. remember that live loads shall be placed so as to cause the greatest effect.
Hydraulic cylinders with a stroke of 72 inches are available with bore sizes from 2 o 8 inches. Hydraulic piston pumps with an operating pressure range from 200 to 3000 psig are available with pumping capacities of 5, 10, and 15 gallons per minute..
A 500 L (132 gal) tank contains 255 mg/L 2,4,6-trichlorophenol dissolved in trichloroethylene (TCE). What is the 2,4,6-trichlorophenol concentration in ppm Assume the temperature of the system is 20 degrees C.
1. a rectangular channel 5 m wide carries a discharge of 10 m3s at a uniform depth of 3 m. the channel is running on a
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd