What downward force would be necessary to hold

Assignment Help Civil Engineering
Reference no: EM13542214

A block of material has a mass density of 650 kg/m^3 and volume of 0.37 m^3. Find the weight of the block in Newtons and the specific gravity of the material. What downward force (in Newtons) would be necessary to hold the block from the previous problem completely under water, if the water is seawater (s.g. = 1.03

Reference no: EM13542214

Questions Cloud

Determine the stress in the wall at two points a and b : The end caps are spherical. The cylinder has length of 30 inc., a diameter of 8 in., and a wall thickness of 0.125 in. Determine the stress in the wall at two points A and B. For each, draw the stresses on a 3-D element. Treat the upper cap as spheri..
Calculate the force that the bolt must put on the hatch to : A circular hatch, 2-m in diameter has its top 10-feet under water ( fresh water s.g. = 1.0), and is hinged on the bottom, and held closed on the top with a single bolt. Perform a moment balance about the hinge to calculate the force that the bolt mus..
What is the flow rate in cfs from the higher to the lower : Water is flowing from a higher to a lower reservoir through a 24-inch pipe that has a Darcy friction factor of 0.02. The local loss coefficients for the bends, entrances
Future cash flows : Future cash flows
What downward force would be necessary to hold : A block of material has a mass density of 650 kg/m^3 and volume of 0.37 m^3. Find the weight of the block in Newtons and the specific gravity of the material. What downward force (in Newtons) would be necessary to hold the block from the previous pro..
The value of financial planning to friends or family : How would you explain the value of financial planning to friends or family?
Explain the extrusion process and differentiate between : A concrete (n=0.013) stormwater channel, 6-feet in diameter, has a bed slope of 0.01%. What is the uniform flow in cfs when the pipe is half full?
Global financial policy fall : Global Financial Policy Fall
What is the value of the company : 1. Janetta Corp. has an EBIT rate of $975,000 per year that is expected to continue in perpetuity. The unlevered cost of equity for the company is 14 percent, and the corporate tax rate is 35 percent. The company also has a perpetual bond issu..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the volume and relative denesity in air

An object weighs 289.2N in air and 186.9N in oil of specific gravity is 0.75 find its volume and relative denesity

  Calculate the total active earth force per foot of wall

Calculate the total active earth force per foot of wall and its point of application from the base of the wall. Use Rankine theory. Calculate the total active earth force per foot of wall if the angle of wall friction between backfill and wall is 2..

  Design a cord which stretches 2 times the unstretched length

Design a cord (design the constants k and ) so the cord stretches 2.5 times the unstretched length, and the acceleration of the jumper doesn't exceed 3g, and the cord has zero stiffness at the bottom of a 400ft drop.

  A symmetric compound channel in over bank flow has a main

a symmetric compound channel in over bank flow has a main channel with a bottom width of 30 m side slopes of 11 and a

  Determine intensities w1 and w2 of distributed loading actin

The wall footing is used to support the column load of 12,000 lb. Determine the intensities w1 and w2 of the distributed loading acting on the base of the footing for equilibrium

  What is the relationship between drag forces for two plates

Two different fluids flow over two identical flat plates with the same laminar free-stream velocity. Both fluids have the same viscosity, but one is twice as dense as the other. What is the relationship between the drag forces for these two plates

  Calculate the flow rate imprted by the impeller

A six bladed rushton turbine 2.0m in diameter rotating at 25 rev/min in a tank 4m deep, water temperature= 10 degree celcius. For this flocculation system calculate the following: a) Reynolds number

  What is min required heat transfer rate from heat source

A waste heat source is available at 400°C. A heat engine operates using heat from this source. It rejects heat to the surroundings at 38°C. The power from the engine runs an air conditioner to keep the air inside a building at 25°C

  How long did the electric heating system run that night

A passive solar house that is losing heat is outdoors at an average rate of 50,000 kJ/h is maintained at 22oC at all times during a winter night for 10h.

  Find the time taken for the depth to empty completely

a rectangular swimming bath is 1m deep at one end and increases uniformly in depth to 2.6m at the other end . the bath is 8m wide and 32m long and is emptied through an orifice of 0.2m^2 at its lowest point.

  What was the students associated perception reaction time

The student strikes the sign at a speed of 25 mi/h. if the student was travelling at 65 mi/h when the sign was first spotted, what was the student's associated perception reaction time

  Define what stress will be necessary to the slip plane

Consider a metal single crystal oriented such that the normal to the slip plane and the slip direction are at angles of 42.1* and 48.9*, respectively, with the tensile axis.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd