Suggest a hen managentment strategy that will maximize

Assignment Help Civil Engineering
Reference no: EM13561571

A polutry farm owns 100 laying hens. Each week a hen can either lay 12 eggs or hatch 4 eggs, but not both. At the end of the four-week period all eggs and chicks will be sold: an egg will bring 10 cents, and a chick will bring 60 cents. Assume that an egg can be hatched only in the week after it is laid. Otherwise it must be saved and sold for 10 cents. Assume that there are no eggs available for hatching in the first week. Suggest a hen managentment strategy that will maximize profit for this operation.

Reference no: EM13561571

Questions Cloud

Corporate social responsibility : Corporate Social Responsibility
Design method to select the most economical beam section : A simply supported steel beam carries a factored concentrated load of 25 kips at the center of its 36-ft span. The beam has lateral support at the center of the span and at both ends (Lb = 18 ft). Use the AISC design
The results of the marketing research : The results of the marketing research
Check the shear resistance of this beam : A W14x34 section is used as a simply supported beam over a span of 20 ft. The beam is loaded with a concentrated live load of 10 kips at the center of its span, in addition to its own weight.
Suggest a hen managentment strategy that will maximize : A polutry farm owns 100 laying hens. Each week a hen can either lay 12 eggs or hatch 4 eggs, but not both. At the end of the four-week period all eggs and chicks will be sold: an egg will bring 10 cents, and a chick will bring 60 cents.
Descriptive material has negligible value : Descriptive material has negligible value and should be avoided. We are seeking analysis, discussion and recommendation, enriched by ideas found in journal articles.
Determine the lifetime risk of a resident : Consider a small town in the Phillippines, where the average weight of people is 55 kg, and the average lifespan is 60 years. The people here eat lots of fish due to abundant availability from the local river.
Determine the risk to the workers who work 8 hours/day : The natural air flow rate to this industrial shade structure is 90 m3/hour. Determine the risk to the workers who work 8 hours/day, 50 weeks/year for 30 years. Assume workers are 75 kg and live for 70 years.
Can you find bod10 from this test : During a BOD test, 2 mL of waste water having a DO of 0 was mixed with 298 mL of dilution water having a DO of 8.9 mg/L. After 5 days and 20 days, it was noted that the DO of the test bottle was 4.0 and 2.5 respectively,

Reviews

Write a Review

Civil Engineering Questions & Answers

  At what equal height above shorline should target be located

A surveyor is going to take a 5.5 mile sight across a lake from the top of one tower to a target on the top of another tower. It is desired to keep the line of sight 6 ft above the lake surface.

  Select the best rectangular hss for a column to support

If the allowable shear stress is 100 MPa, calculate the maximum shear force V that a W460 X 60 structural steel wide flange is capable of resisting. Use the average web shear approach.

  Estimate the elastic modulus of the frozen artery

Properties of frozen tissues have been measured as part of understanding the response of tissue to cryopreservation. In one set of experiments, frozen bovine carotid arteries were tested in uniaxial tension.

  What is the stress in the lowermost rock

The Washington Monument is 169 m tall. What is the stress in the lowermost rock if it is made of Georgia granite?

  What must be the radius of the steel wire

What must be the radius of the steel wire if it is to stretch the same distance as the aluminium wire, so that the two wires maintain equal lengths after the masses are attached?

  Determine total stress and pore water pressure of sand

a layer of clay, 5m thick, overlies a deposite of sand, 5m thick, which is underlaid by rock. the water table in the sand is sub-artesian with a level at 2m below fround level. the saturated unit weights of the clay and sand are 21 and 16 KN/m^3 r..

  Determine the magnitude of the acceleration of point p

A wheel has an angular acceleration of alpha=(0.5*theta) rad/s^2 , where theta is in radians. a) Determine the magnitude of the velocity of point P located on its rim after the wheel has rotated 2 revolutions.

  Find solution of bvp and equation which defines critical l

A uniform thin column of length L, positioned vertically with one end embedded in the ground, will deflect, or bend away,from the vertical under the influence of its own weight

  Calculate the f per m ration for the aeration tank

An activated sludge process receives 4000m^3 / day containing 120 mg BOD /L from the primary settling tank and 3500 m^3/day Containing 25mg BOD/L from the secondary settling tank.

  Determining height for trajectory motion

The elastic ball bounces down a flight of rigid stairs. Determine the height h of the steps if all the trajectories between successive steps are identical. Use e = 0.85 and the initial velocity 6 m/s.neglect friction. (Theta=70 degrees)

  Determine the time needed for block a to rise 3 m

The motor draws in the cable at c with a constant velocity of vc= 4 m/s. The moto draws in the cable at D with a constant acceleration of aD=8 m/s^2. If vD=0 when t=0, determine: a) the time needed for block A to rise 3 m b)the relative velocity of b..

  Determine what is the pressure acting on the sand

A 3-ft diameter column with weight of 150 kg is placed on top of 1 m thick aggregate layer. The soil beneath the aggregate layer is sand. The friction angle of the aggregate is 36 degrees and the unit weight is 22 lb/ft3. What is the pressure acti..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd