Size distribution of the particles entering the filters

Assignment Help Chemical Engineering
Reference no: EM13884278

A fluidized bed is used in the production of aniline by the hydrogenation of nitrobenzene. Single-stage cyclones, followed by candle filters, are used to remove fines from the gases leaving the fluidized bed.

The reactor operates at a temperature 270 °C and a pressure of 2.5 bara. The reactor diameter is 10 m. Hydrogen is used in large excess in the reaction, and for the purposes of this exercise the properties of the gas may be taken as those of hydrogen at the reactor conditions. The density of the catalyst particles is 1800 kg/m3.

The estimated particle size distribution of the fines is:

1741_estimated particle size distribution of the fines.jpg

A 70% recovery of the solids is required in the cyclones.

For a gas flow rate of 100,000 m3 /h, at the reactor conditions, determine how many cyclones operating in parallel are needed and design a suitable cyclone. Estimate the size distribution of the particles entering the filters.

Reference no: EM13884278

Questions Cloud

Operate at essentially atmospheric pressure : Design a column for this separation. The column will operate at essentially atmospheric pressure. Use a reflux ratio 1.5 times the minimum.
What is their multi-factor productivity currently : 1Charles Bakery in Idaho, makes 1,500 loaves every month. They estimate the demand to be 25% more than their current sales. Their current single factor productivity is 2.344 loaves per labor-hour.
Advantages of using electronic health records : advantages of using electronic health records.
Audit interest expense and interest payableaccounts : Your client, Red Horse, Inc., prepared the following schedule for long term debt for the audit of financial statements for the year ended December 31, 2013:
Size distribution of the particles entering the filters : For a gas flow rate of 100,000 m3 /h, at the reactor conditions, determine how many cyclones operating in parallel are needed and design a suitable cyclone. Estimate the size distribution of the particles entering the filters.
Explain how using edi facilitates electronic transactions : Explain how using EDI facilitates electronic transactions
Equilibrium data for the system ethanol : Design a suitable sieve plate for conditions below the feed point. Equilibrium data for the system ethanol-water, at 760 mmHg, mol fractions ethanol:
What is an electronic medical record : What is an electronic medical record / electronic health record?
Covenants are extracted from the indenture : The following covenants are extracted from the indenture of a bond issue.

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Estimate the total surface area of char

In the direct steelmaking reactor based on the reduction of an oxidizing foaming slag by char (carbon) particles and droplets of iron containing 2% carbon. Estimate the total surface area of char and iron droplets needed to achieve the smelting ..

  Overlay the pourbaix diagram for water

Draw another diagram overlaying the Pourbaix diagrams for nickel and silver and use this diagram to explain the likely outcome of holding a solution of nickel ions in a silver container.

  Flow rate the rate of flow to an ammonia synthesis reactor

the rate of flow to an ammonia synthesis reactor contains 25 mole ltbrgtnitrogen and the balance hydrogen. the flow

  Corresponding number of actual plates

A continuous distillation unit, consisting of a perforated-tray column together with a partial reboiler and a total condenser, is to be designed to operate at atmospheric pressure to separate ethanol and water. The feed, which is introduced into t..

  Concept of a mass balance

Using the concept of a mass balance describe how environmental engineers and scientists model the carbon cycle in the earth's atmosphere allowing them to predict build up of CO2 over time.

  Calculate the molar fraction of system in the vapor phase

Calculate the molar fraction of the system in the vapor phase

  Estimate the feed flow rates of glycine

a. Estimate the feed flow rates of glycine and guaiacol that would be needed to produce 100 kg/day of the API. b. Estimate how much product is lost in the thin-film evaporator.

  How is acetyl chloride produced if 915 gallons is produced

acetyl chloride is a colorless fuming liquid used primarily in the chemical industry.a how is acetyl chloride produced?

  Why are firefighters advised to use dry sand rather than

two important allotropes of elemental phosphorus are white phosphorus and red phosphorus a. why should gloves be worn

  Inert gas for blanketing and purging vessels

A supply of nitrogen is required as an inert gas for blanketing and purging vessels. After generation, the nitrogen is compressed and stored in a bank of cylinders, at a pressure of 5 barg.

  Suitable type of centrifuge

The viscosity of the liquor is 0.7 mN m-2 s. The cutoff crystal size required is 5 μm. Select a suitable type of centrifuge to use for this duty.

  Determine the operating point and pump efficiency

Plot the system curve on the pump characteristic given in Figure and determine the operating point and pump efficiency. Properties of the fluid: density 900 kg/m3, viscosity 1.36 mN m-2 s.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd