Important in wireless lans than in wired lans

Assignment Help Management Theories
Reference no: EM131117087

Small problems
1. Explain why the MAC protocol is more important in wireless LANs than in wired LANs.

2. Explain why there is more attenuation in a wireless LAN than in a wired LAN, ignoring the noise and the interference.

3. What is multipath propagation? What is its effect on wireless networks?

4. An AP may connect a wireless network to a wired network. Does the AP need to have two MAC addresses in this case?

5. How does the access point know whether a wireless data packet is intended for its network?

6. Unlicensed bands are part of the radio spectrum that are available nationwide to all users without requiring a license. However, a drawback is that, because there are no licenses, there can be interference between devices. Use the Internet to identify a list of devices that can interference with WLANs in either the ISM or U-NII bands.

True/False & Multiple Choice Questions:
1. In ad hoc mode, the wireless clients communicate directly with the AP. True or False?

2. On a regular basis, wireless clients will scan all the radio frequencies to determine if a different AP can provide better service. True or False?

3. A wireless NIC performs the same functions as a wired NIC except that it_____.

a. does not transmit the packet
b. uses an antenna instead of a wired connection
c. contains special memory
d. does not use parallel transmission

4. Which of the following is not a function of an AP?
a. sends and receives RF signals
b. connects to the wired network
c. serves as a router
d. acts as a bridge between the wired and wireless networks

5. The highest data rate for an 802.11g RF WLAN is about ______ Mbps.
a. 22
b. 1
c. 2
d. 54

6. The IEEE 802.11b standard that outlines the specifications for RF WLANs is based on _____.
a. FHSS
b. DSSS
c. infrared
d. OFDM

7. Because all the IEEE WLAN features are isolated in the PHY and _____ layers, any network operating system or LAN application will run on a WLAN without any modification.
a. MAC
b. network
c. PLCP

d. PMD

8. The Physical Layer standards for 802.11b are based on _____ spread spectrum.
a. frequency hopping
b. QAM
c. direct sequence
d. BPSK

9. The method used in 802.11 to implement CSMA/CA is based on ______.
a. DSSS
b. DCF
c. FHSS
d. PCF

10. If the AP does not send the SSID of the WLAN in the beacon, client devices can still obtain the SSID by _______.
a. sending an associate request frame
b. transmitting an SSID request frame
c. sending a probe frame
d. transmitting a special data frame

11. The maximum data rate of an IEEE 802.11a WLAN, according to the standard, is _______.
a. 11 Mbps
b. 24 Mbps
c. 54 Mbps
d. 108 Mbps

12. In PCF, the client devices cannot transmit unless ________.
a. the WLAN is operating in peer-to-peer mode
b. the AP sends an ACK frame
c. the AP sends data first
d. the client is "polled" by the AP

13. The Federal Communications Commission (FCC) has segmented the 555 MHz of the original UNII spectrum into four segments or bands, and each band has a maximum power limit. True or False?

14. The most important change made to the MAC layer of 802.11a was ______.
a. to make the frames shorter
b. to increase security
c. to make the frames longer for efficiency
d. none of the above

15. IEEE 802.11a achieves its increase in speed and flexibility over 802.11b by each of the following except ______________.
a. higher frequency
b. using less bandwidth
c. more transmission channels
d. a new multiplexing technique

16. The Unlicensed National Information Infrastructure (U-NII) band operates at the _____ frequency.
a. 2.4 GHz
b. 33 GHz
c. 5 GHz
d. 16 KHz

17. All 5 GHz bands are available to WLANs worldwide. True or False?

18. Although such devices as 2.4 GHz cordless phones, microwave ovens, and Bluetooth devices may cause interference problems with 802.11b networks in the 2.4 GHz ISM band, they are not a problem with 802.11a. True or False?

19. Each frequency channel in an 802.11a WLAN is 20 MHz wide and supports ______ subcarrier signals.
a. 56
b.114
c. 52
d. 48

20. One of the reasons that 802.11n achieves a higher bandwidth is that it bonds two ISM or U-NII channels. Another important reason is that it_____________.
a. eliminates multipath interference
b. uses antenna diversity
c. can transmit using multiple spatial streams
d. can transmit in any two frequency channels simultaneously

21. When actively using a network while roaming in an ESS, the process of connecting and disconnecting from the APs in one's path is called ________.
a. MIMO
b. handoff
c. switching
d. nomadic

22. IEEE 802.11n devices can be as far as 375 feet apart and can send and receive data at up to ________ million bits per second (Mbps).
a. 75
b. 600
c. 100
d. 54

23. Why is the 802.11a standard not backwardly compatible with the 802.11b/g standard?
A. 802.11a uses the 5GHz frequency band
B. 802.11a uses OFDM instead of DSSS
C. 802.11b or 802.11g was a proprietary standard.
D. 802.11b or 802.11g causes interference.

Reference no: EM131117087

Questions Cloud

Make up an arithmetic sequence problem : If a person took the time to write out the solution by hand they would come up with the very same answer. Make up an arithmetic sequence problem (find the 10th value) share/explain answer.
Discuss the financial and non-financial issues : 1. Discuss the financial and non-financial issues that may arise when an organisation is considering outsourcing some of its key support activities.
How does augustine develop his argument : Augustine (7) writes about war. One of the headings under which some excerpts are organized is the one that deals with the use of "force in the service of religion." How does Augustine develop his argument?
Four speed dial numbers to four : Grandma got a smart phone and needs help assigning the first four speed dial numbers to four of her 17 contacts. How many ways can the speed dial numbers be assigned?
Important in wireless lans than in wired lans : 1. Explain why the MAC protocol is more important in wireless LANs than in wired LANs.
Who wants to live in a surveillance society : Find a newspaper editorial/article that uses poor reasoning. Describe the reasoning, and identify the type of poor reasoning used. (Note - although the readings use a series of examples from homeschooling in Akron - your readings should be a uniqu..
What were the greatest challenges of teaching philosophy : Rihill: He provides a rich window on the experiences of the Greek philosophers. What were the greatest challenges of teaching philosophy in the Ancient Greek world, and how did the philosophers meet them?
Security code review for embedded system : 1. Briefly discuss how a security code review for an embedded system would be similar to and different from a security code review of a Web application containing the same number of lines of code.
How impact helped transform the american economy : Relate the most significant impact of one or more of these factors and how they helped transform the American economy as it approached the eve of the Civil War.

Reviews

Write a Review

Management Theories Questions & Answers

  Reasonable accommodation and undue hardship

Discuss the concept of reasonable accommodation and undue hardship. How does it apply to Elora Jean & Co.? How should this employee be addressed?

  Medical devices sold in japan

Medical Devices sold in Japan

  Share with us a personal experience involving a natural or m

Share with us a personal experience involving a natural or man-made crisis or disaster that interrupted your normal routines and/or created a problem for the businesses they affected. Were you prepared for this crisis? Were the affected businesses pr..

  Simple cause-and-effect diagram to analyze

1. Suppose that a table lamp fails to light when turned on. Prepare a simple cause-and-effect diagram to analyze possible causes.

  All of the business disciplines

Prepare a one-page paper telling me your understanding of what a strategic audit is, does, and entails. Do you understand how it pulls together all of the business disciplines you have been studying to achieve a certain end?

  Explain the role of ethics in entrepreneurship

Explain the role of ‘Ethics' in Entrepreneurship. 2. What do you understand by ‘Public Limited Company'? 3. Difference between ‘Intrapreneur' & ‘Intrepreneur'. 4. What is ‘Copyright'?

  What is the economic order quantity for each supplier

What is the economic order quantity for each supplier?

  Discuss relationship between mcgregor theory x and y

Discuss the possible relationship between McGregor's Theory X and Y with scientific management

  Ti improve the level of service provided by the hotel

What additional information woukd be helpful ti improve the level of service provided by the hotel? And how can this additional information be collected?

  International business finance ques1 difference between

ques1 difference between heavy lift amp long lift surcharge??? ltbrgt ltbrgtques2 explain long lift

  Job as production manager in the electronics plant

1. You have taken a job as production manager in the electronics plant your  company has just bought in Hungary

  Identify resources required in the project

As a project manager, you want your ultimate project to be successful. While you cannot control everything, such as the weather, you should focus on those elements you can control. Evaluating your project in all of its life cycle phases can better..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd