How to achieve a flow rate of 1 cfs at an elevation

Assignment Help Civil Engineering
Reference no: EM13320002

Size an orifice and a weir for problem 2 on page 398 and 399 of the text book to achieve a flow rate of 1 cfs at an elevation of 102.5 feet and a total flow rate of 50 cfs at an elevation of 106 feet. Do not include the 21' weir at 104 feet.

Reference no: EM13320002

Questions Cloud

Major types of computer systems : Identify and explain key trends that are occurring in computer peripheral devices and how do these trends affect business uses of computers
Explain the main differences between http version : Explain FTP and TFTP and their main differences. Using a diagram, explain the main differences between HTTP version 1.0 and 1.1
Determine how much the boiling temperatures of water : As the weather forecasters frequently state, the atmospheric pressure drops during stormy weather and it rises during clear and sunny days.
What is the minimm work consumed by the compressor : A refrigerator compressor compresses 0.5 kg/s of saturated R-134A vapor at -10C to 1000 kPa and 50C. The compresser has a point that is not insulated and losess heat to the surroundings,
How to achieve a flow rate of 1 cfs at an elevation : Size an orifice and a weir for problem 2 on page 398 and 399 of the text book to achieve a flow rate of 1 cfs at an elevation of 102.5 feet and a total flow rate of 50 cfs at an elevation of 106 feet
Emotional and disciplinary disorders : Tom Pearson has a child who has emotional and disciplinary disorders
Determine maximum possible precipitation at new york city : Determine the maximum possible precipitation at New York City that may be encountered on a 100 mi^2 drainage area over a 96 hr period.
Determine what discharge is available half of the time : By continuous discharge measurements the discharge in stream was determine over a 3-year period. After the data were assembled, it was found that the discharge exceeded 120 cfs 3 percent of the time;

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the force arm oa exerts on the smooth cylinder

If arm OA rotates with a constant clockwise angular velocity of theta dot(first dirivatie)=1.5 rad/s. determine the force arm OA exerts on the smooth 4-lb cylinder B when theta=45 degrees.

  Determine the alkalinity and total carbonate concentration

If the pH of a natural water is 7.8, and the alkalinity was measured to be 125 meq/L, determine the following: - Alkalinity as mg/L CaCo3 - Approximate the total carbonate concentration (Ct), in moles per liter.

  How many metric tons per day of nox are emitted

A coal-fired power plant produces a net electrical output of 500 MW. The composition of the coal burned is C= 72 %, H= 6 %, S= 3.5 %, O= 6 %, N= 1 %, and ash= 12 % by weight. It's heating value (HV) is 30200 kJ/kg. The net thermal efficiency is 36..

  Determine what is the lattice of the structure

A particular unit cell is cubic with ions of type A located at the corners and facecenters of the unit cell and ions of type B located at the midpoint of each edge of the cube and at the body centered position.

  Determine the maximum displacement of the plate

Determine the maximum displacement of the plate A if the billet strikes the plate with a speed of 8 . Neglect the mass of the springs, rollers and the plates A and B. Take = 4000 , = 40000 .

  Determine diameter of solid shaft if it is to transmit 50hp

If the allowable shear stress is 15ksi, determine the diameter of a solid shaft if it is to transmit 50hp at a frequency of (a) 900rpm, (b) 1800rpm

  Find bod reaction rate constant of a municipal waste water

If the BOD5 of a municipal wastewater is 310 mg/L and the BODU is 340 mg/L, determine the BOD reaction rate constant (base e). What would be the 3 day 30°C BOD Assume, temperature coefficient = 1.047.

  Determine what is the turbidity of the original sample

A wastewater sample was diluted by turbidity free water; 5ml was diluted to 250 ml. Turbidity of the diluted sample was 2.3 NTU, what is the turbidity of the original sample

  Determine the maximum change in length

Tensile tests of structural steel indicate that it fails when the axial tensile strain is 1800mu. Determine the maximum change in length that a 0:25-in diameter structural steel rod in tension can withstand before failure if it is 24 in in length

  Determine what portion of the tube needs to be reinforced

The copper pipe has an outer diameter of 2.50 in. and an inner diameter of 2.30 in. if the allowable shear stress in the pipe is 2 ksi, what portion of the tube needs to be reinforced

  Find magnitude of the total acceleration of roller coaster

the roller coaster track consists of a circle in a vertical plane of radius 150m. find the magnitude of the total acceleration of the roller coaster if, at the time shown, the car is moving at 50 km/hr and is gaining speed at the rate of 0.4g

  What are the atomic percentages of ni and cu in the alloy

An alloy contains 55 weight % Ni and 45 weight% Cu. What are the ATOMIC PERCENTAGES of Ni and Cu in this alloy

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd