Determine maximum possible precipitation at new york city

Assignment Help Civil Engineering
Reference no: EM13319999

Determine the maximum possible precipitation at New York City that may be encountered on a 100 mi^2 drainage area over a 96 hr period.

Reference no: EM13319999

Questions Cloud

What is the minimm work consumed by the compressor : A refrigerator compressor compresses 0.5 kg/s of saturated R-134A vapor at -10C to 1000 kPa and 50C. The compresser has a point that is not insulated and losess heat to the surroundings,
How to achieve a flow rate of 1 cfs at an elevation : Size an orifice and a weir for problem 2 on page 398 and 399 of the text book to achieve a flow rate of 1 cfs at an elevation of 102.5 feet and a total flow rate of 50 cfs at an elevation of 106 feet
Emotional and disciplinary disorders : Tom Pearson has a child who has emotional and disciplinary disorders
Determine maximum possible precipitation at new york city : Determine the maximum possible precipitation at New York City that may be encountered on a 100 mi^2 drainage area over a 96 hr period.
Determine what discharge is available half of the time : By continuous discharge measurements the discharge in stream was determine over a 3-year period. After the data were assembled, it was found that the discharge exceeded 120 cfs 3 percent of the time;
Determine the corresponding flood peak of the runoff : A 300-acre forested watershed in fair hydrologic condition located on the clayey flat coastal region of Southern California receives 4.0 in. of rain in a 24 hr period.
Determine the corresponding unit hydrograph for channel : A 2.5 hr long uniform rainfall resulted in runoff hydrograph that has the shape of an equilateral triangle. The base of the triangle is 64 hr; the peak flow is 535 cfs; the drainage area is 5.7 mi^2.
Show the amount of allowable depreciation : John Marten is a sole proprietor who engages in financial planning for wealthy individuals. He wants his offices to be decorated with rare collections of art as they are investments which should increase in value.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Explain how to classify the column as slender or non slender

Assume that at one end of the column a clockwise moment of 100 k-ft is present, and that at the other end of the column a counter-clockwise moment of 25 k-ft is present. you may assume that k= 1.

  Compute the magnitude of the force supported by the pin at c

The portable floor crane in the automotive shop is lifting a 420 lb engine. For the position compute the magnitude of the force supported by the pin at C and the oil pressure p against the 2.70 in. diameter piston of the hydraulic cylinder unit AB..

  What is the total time spent in the system by all vehicles

Vehicles arrive at a toll bridge at a rate of 430 veh/hr (the time between arrivals is exponentially distributed) Two toll booths are open and each can process arrivals (collect tolls) at a mean rate of 10 seconds per vehicle

  Determine the power generated by turbine in steady state

Determine the power generated by the turbine (in KW) operating in steady state at 5MPa, with specific enthalpy 3000kj/kg and velocity of 10m/s at the entrance and steam escaping at 0.07MPa, specific enthalpy 2000kj/kg at velocity of 90m/s p.

  Determine the momentum change of a person with a mass

Suppose that a person who boards the elevator on the ground floor gets off on the fifth floor. Assuming that the elevator has achieved operating speed by the time it reaches the second floor and that it is still moving at its operating speed as it..

  How to determine the scale reading at t

A large tank is used to calibrate the reading from a flow meter. Measurements of the system weight as a function of time are made. Water enters the tank vertically from the flow metering system at a speed of 20 ft/sec through a 1.5 in.

  Determine the temperature after throttling

Wet steam at a pressure of 1382 kPa and a quality of 99% is throttled to a pressure of 689.5 kPA. Find the temperature after throttling.

  Find what is the probability of overcrowding at the airport

The selection of the runway for a given day is based on wind at the beginning of the day, and once selected will not be changed for the entire day. The airport has a single peak period each day; this is the hour between 4:00 and 5:00pm.

  Calculate the wet unit weight in pounds per cubic feet

A gray silty clay (CL) is sampled from a depth of 12.5 feet. The "moist" soil was extruded ffrom a 6-inch high brass liner with an inside diameter of 2.83 inches and weighed 777 grams.

  Determine the exit velocity of the gas mixture

Oxygen and methane are mixed at 250kPa absolute pressure and 100 degrees C. The velocity of the gases into the mixer us 5m/s. The density of the gas leaving the mixer is 2.2 kg/m^3. Determine the exit velocity of the gas mixture.

  Determine for each case the ration of the total energy

(1) a constant wind velocity that is twice the mean wind velocity and operating half the time; and (2) a constant wind velocity that is three times the mean wind velocity operating one-third of the time.

  Determine is there any runoff from the area during the storm

During a 5 hour storm event, the precipitation over a 230-acre area is 1.5niches. There is constant infiltration at a rate of 0.12 inches/hour and the depession storage is 17 acre-ft. Is there any runoff from the area during the storm

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd