Find the magnitude and direction of the resultant axial

Assignment Help Civil Engineering
Reference no: EM13531115

A nozzle that discharges a 4in water jet into the atmosphere is onthe right end of a 10in diameter hose. the water in the pipehas a velocity of 12fps and a gage pressure of 60psi. Findthe magnitude and direction of the resultant axial force reactionon the nozzle and head loss of the nozzle.

D1= 10in

V1=12fps

P1=60 psi

D2=4in

V2=?

P2=0

Reference no: EM13531115

Questions Cloud

The mass flow rate of the refrigerant and : Refrigerant R-134a enters the evaporator coils placed at the back of the freezer section of a household refrigerator at 120 kPa with a quality of 20 % and leaves at 120 kPa and -20°C. If the compressor consumes 450 W of power and the COP is 1.2
Determine how much money the home owner would have saved : A house that was heated by electric resistance heaters consumed 1200 kWh of electric energy in a winter month. If this house were heated by a heat pump that has an average COP of 2.4, determine how much money the home owner would have saved that mont..
Consider the process of baking potatoes in coventional oven : Consider the process of baking potatoes in coventional oven.Can the hot air in the oven be treated as a thermal energyreservoir? Explain
A subway train is traveling at a speed of 45 mile : A subway train is traveling at a speed of 45 miles/hour whenthe brakes are fully applied on the wheels of cars A and B, causing them to slide on the track
Find the magnitude and direction of the resultant axial : A nozzle that discharges a 4in water jet into the atmosphere is onthe right end of a 10in diameter hose. the water in the pipehas a velocity of 12fps and a gage pressure of 60psi. Find the magnitude and direction of the resultant axial force reaction..
Two crews are to start at opposite ends of a mountain : A standard five-day BOD test is run using a mix consisting of fourparts distilled water and one part wastewater (no seed). Theinitial DO of the mix is 9.0 mg/L, and the DO after five days isdetermined to be 1.0 mg/L. What is BOD5 ?
How many customers would be served pertruck if each home has : Making two runs per day, how many customers would be served pertruck if each home has once-per-week service and the truck is usedfive days per week?
Why is it sometimes necessary to seed the sample : Why is the test run in the dark (or in a black bottle)?
What fractionof the total impact of that years emissions of : Weighting these by their global warming potentials, what fractionof the total impact of that year's emissions of these three gaseswould be caused by each gas over the following time periods?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the exit temperature through a tube at a rate

Water flows through a tube at a rate of 7.5 kg/min while heat is added to it at a rate of 4.5 kW. If water entered at 20 degrees celcius, determine the exit temperature. Assume the pressure remains constant at 1 atm throughout.

  Explain why would it be dangerous to use the material

A structural component in the form of a very wide plate is to be fabricated from 4340 steel that was cooled using a fast cooling rate and has a yield strength of 1515 MPa and a fracture toughness (KIC) of 60.4MPam.

  How much excess pore water pressure would need to develop

The vertical effective stress at a certain point in a loose sand is 1000lb/ft^2. If an earth quake were to occur, how much excess pore water pressure would need to develop at this point for liquefaction to occur

  Determine the collimation error e present in the

a. explain how the presence of the collimation error e can be detected in a two peg test operation.b. a b and c are

  What was involved in the first far-reaching

what was involved in the first far-reaching, comprehensive study of Earth's oceans?

  Determine if the as-drawn wire will break during the process

A 3105 Aluminum alloy wire is to be drawn to give a 1-mm diameter wire having a yield strength of 20,000 PSI. assume that there is no friction in the wire drawing process

  Determine the normal and critical depth for 4-m-wide channel

Determine the normal and critical depth for a 4-m-wide rectangular channel with a discharge of 100 m3/sec. The cannel is made of concrete and the slope is 1.0 percent. Also determine the flow classification (critical, subcritical or supercritical)

  Determine what diameter pipe would be recommend

A circular concrete pipe (n = 0.012) carries a discharge of 450 cfs with a slope of 0.008 and is designed to run no more than 60% full (by depth). What diameter pipe would you recommend

  Determine the allowable load p for the safety factor

a plane truss is subjected to a loads 2P and P at joints B and C, respectively, as shown in figure part a.The truss bars are made of two L102 x 76 x 6.4 stell angles having an ultimate stress tension equal to 390 MPa (cross-sectional are of the tw..

  Estimate the particle removal efficiency

How do you propose to do this at the above treatment plant and estimate the head loss both immediately after backwash and 10 hours later, if the same water is applied at a rate of 2 L/s.m 2 .

  Determine substrate concentration and biomass concentration

how to determine the substrate concentration and biomass concentration at 0.5 days. Use spreadsheet to solve for the concentrations with a delta t = 0.01 days

  Determine the value of the dynamic viscosity at conditions

Start from the values for the density and the kinematic viscosity of CO2 at 15o C and standard atmospheric pressure (101.3 kPa), and first determine the value of the dynamic viscosity at the same conditions.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd