Express the diameters in inches and use inside diameters

Assignment Help Chemical Engineering
Reference no: EM131061447

Prepare a plot of optimum economic pipe diameter versus the flow rate of fluid in the pipe under the following conditions:
Costs and operating conditions ordinarily applicable in industry may be used.

The flow of the fluid may be considered as in the turbulent range.

The viscosity of the fluid may range from 0.1 to 20 centipoises.

The plot is to apply for steel pipe.

Express the diameters in inches and use inside diameters.

The plot should cover a diameter range of 0.1 to 100 in.

Express the flow rate in 1000 lb/h.

The plot should cover a flow-rate range of 10 to 100,000 lb/h.

The plot should be presented on log-log coordinates.

One line on the plot should be presented for each of the following fluid densities:
100, 50, 10, 1, 0.1, 0.01, and 0.001 lb/ft3

Reference no: EM131061447

Questions Cloud

Is there ever time when divisiveness is morally responsible : Using this quote, answer the following question: Is there ever a time when divisiveness is the morally responsible choice?
Determine the optimum number of effects for minimum : If the pounds of water evaporated per pound of steam equals 0.85 x number of effects, determine the optimum number of effects for minimum annual cost.
Explain how the various functions of hr professionals enable : Consider how your view of the HR profession within an organization has changed since the beginning of the course. Consider how the various functions of HR support the strategy of an organization,
How can members of a workplace team help each other : The art of being a good team player is helping other members. How can members of a workplace team help each other
Express the diameters in inches and use inside diameters : Express the diameters in inches and use inside diameters.
What should law enforcement agencies do : Discuss the potential negative individual and organizational consequences for Asian Americans being perceived as a "model minority." What should law enforcement agencies do to curb discrimination against minorities? What can the public do
Determining the complete combustion : How many grams of oxygen gas are needed for the complete combustion of 1.1×102 g of acetylene?
Prepare a plot of optimum economic pipe diameter : For the conditions indicated in Prob. 7, prepare a log-log plot of fluid velocity in feet per second versus optimum economic pipe diameter in inches. The plot should cover a fluid-velocity range of 1 to 100 ft/s and a pipe-diameter range of 1 to 1..
Sucrose decomposes completely : If common sugars are heated too strongly, they char as they decompose into carbon and water vapor. For example, if sucrose (table sugar) is heated, the reaction is

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Open-system energy balance to calculate exit steam

Negligible heat is transferred from the nozzle to its surroundings. The approach velocity of the steam is negligible. The specific enthalpy of steam is 2974J/kg at 260°C and 7bar and 2860kJ/kg at 200°C and 4bar. Use the open-system energy balance ..

  Temperature and pressure are introduced to the pipleline

Problem 2: Methane containing 4 mol% N2 is flowing through a pipleline at 105.1 kpa and 22 °C. To check this flow rate, N2 at the same temperature and pressure are introduced to the pipleline at the rate of 2.83 m3/min.

  Calculate the rate of moisture condensation

Calculate the rate of moisture condensation (kg/h) and the volumetric flow rate of the air drawn from the outside.

  Question 1nbsp part a inbsp discuss how transmission

question 1.nbsp part a inbsp discuss how transmission electron microscopy tem can provide information complementary to

  Calculating reaction at support we say centorid of triangle

In Uniformly varying load in simply supported beam, when we are calculating reaction at support we say centorid of triangle will be at 2x/3 from a to b. but, when calculating moment we say centroid will lies at x/3 from a to b, why?

  What is the rationale for claiming that the presence of a lo

What is the rationale for claiming that the presence of a low temperature loss peak is a necessary and sufficient condition for good room-temperature impact strength

  Overall reaction in a commercial heat pack

The overall reaction in a commercial heat pack can be represented as: 4Fe(s)+  3O2(g) yields 2Fe2O3(s); delta H=1652 kJ a. How much heat is released when 4.00 mol iron is reacted with excess O2?

  Determine recent developments in process instrumentation

Select a process variable (pressure / temperature / level / flow) and conduct a literature  survey to determine recent developments in process instrumentation field. Identify any one  novel instrument and explain in detail the working of the instr..

  Formaldehyde reaction products

Under the mannich reaction, after the initial amine-formaldehyde reaction, could xylene act as a substrate to stabilize the reaction if the reaction does not stabilize during or prior to dehydration and clearing? In synthetic chemistry, amine-form..

  Develop the localized versions internally

In a project manager simulation were you made different language versions in French, German, and Japanese of a software product named LullSIM with an internal team. In this simulation you were not able to choose the option of hiring contractors, g..

  Calculate the work done in the isothermal reversibl

Calculate the work done in the isothermal reversible expansion of one mole of CH4 (g) from 1.00 dm3 to 10.00 dm3 at 300 K. Treat methane as a van der Waals gas. The van der Waals gas constants for methane are: a=2.3026 dm6⋅bar⋅mol-2 and b=0.043067 dm..

  Finding the heat of reaction

Finding the Heat of Reaction (Enthalpy) from Heats of Formation

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd