Explain liquid hcn is unstable with respect to trimer

Assignment Help Chemistry
Reference no: EM13312018

Liquid HCN is unstable with respect to trimer formation. What would be the structure of this trimer?

Reference no: EM13312018

Questions Cloud

How to calculate the mass percent composition of carbon : Calculate the mass percent composition of carbon in each the following carbon compounds. Express your answer using 4 significant figures. C4H10 C6H10 C8H13O5N
Find width of channel when flow is in critical condition : A rectangular unfinished concrete channel with wood forms is laid on a bottom slope of 0.0064 to carry a flow of 20m^3/s of water. Determine the width of the channel when the flow is in critical condition.
Define oxidized to an optically inactive dicarboxylic acid : With aqueous H2CrO4, compound A was oxidized to an optically inactive dicarboxylic acid C, C6H10O4. Give structures for compounds A, B, and C; do not specify stereochemistry
Determine the horizontal force the wire exerts on the poles : A telephone wire 5 mm in diameter is suspended between telephone poles spaced 50 m apart. If the wind velocity is 100 km/h and the air is at 2 degrees C, 1 atm, determine the horizontal force (in N) the wire exerts on the poles.
Explain liquid hcn is unstable with respect to trimer : Liquid HCN is unstable with respect to trimer formation. What would be the structure of this trimer
Write a computer program to calculate deflection at midpoint : Two 52 kN loads are maintained 2.5 m apart as they are moved slowly across beam AB. Write a computer program to calculate the deflection at the midpoint C of the beam for values of x from 0 to 9 m, using .5 m increments.
How to select economical solid rectangular timber beam made : A simply supported beam is to span 12 feet. It will support a uniformly distributed load of 800 pounds per linear foot over the full span and a concentrated load of 1000 pounds acting at 4 feet from the left support.
Explain the enthalpies of bond formation to rationalize : Use the enthalpies of bond formation to rationalize why nitrogen forms a dimer and phosphorous a tetramer.
What is the speed of ambulance : As you stand motionless on the sidewalk, you hear an ambulance siren broadcasting a shrill 610hz sound while it is approaching, What speed is the ambulance

Reviews

Write a Review

Chemistry Questions & Answers

  What mass of natural gas must burn

What mass of natural gas (CH4) must burn to emit 470. kJ of heat? CH4(g) + 2 O2(g) CO2(g) + 2 H2O(g).

  State car manufacturers are developing engines

Car manufacturers are developing engines that use H2 as fuel. In locations where hydroelectric plants produce inexpensive electric power, the H2 can be made industrially by the electrolysis of water.

  Explain what is the metal in the anode

The temperature in the laboratory was 25°C, and the barometric pressure was 740 mmHg. At 25°C, the vapor pressure of water is 23.8 mmHg. Calculate the equivalent mass, EM, of the unknown metal anode. The student was told the metal was oxidized to ..

  State what is the final concentration of d atequilibrium

Acetylene, C2H2, can be converted to ethane, C2H6, by a processknown as hydrogenation. The reaction is

  Compute the ph of a solution containing formic acid

Calculate the pH of a solution containing 25.00 mL of 0.12 M formic acid (Ka = 1.7 x 10^-4) to which the following amounts of 0.10 M NaOH have been added:

  Explain how many possible trisubstituted derivatives

How many possible trisubstituted derivatives C6H3X2Y can be obtained from the para disubstituted benzene C6H4X2?

  State carbon monoxide to oxygen in the exhaust gas

A gaseous hydrocarbon fuel is burned in 26.84% excess oxygen and the exhaust gas analyzed. On a dry basis, the ratio of carbon dioxide to carbon monoxide to oxygen in the exhaust gas

  Compute the mass of each acid necessary

For each of the following acid-base reactions, calculate the mass (in grams) of each acid necessary to completely react with and neutralize 5.15 of the base.

  Compute the complete flue gas analysis

A heater burns normal Butane (n-C4H10) using 40% excess air. combustion is complete . the flue gas leaves the stock at a pressure of 100 kpa and a temperature of 260 c

  Compute the q for the water in joules

Calculate the Q for the water in Joules (c for water is 4.184J/g degrees celsius). Determine the Q for the metal in Joules based on your knowledge of conservation of energy. (you cannot use the Q=mcdeltaT equation, because you do not know the c fo..

  Explain the redox reaction reaction under basic conditions

Complete and balance the following redox reaction reaction under basic conditions- PO3^3-(aq)+ MnO4^-(aq) ? PO4^3-(aq)+ MnO2(s).

  Explain what is the concentration of co2 in the air

which caused the CO2 in the sample to precipitate as BaCO3. The excess base was back-titrated to a phenolphthalein end point with 23.6ml of .0108 M HCl. What is the concentration of CO2 in the air in parts per million? use 1.98g/L for the density ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd