User Account

All Pages

Estimate the total volume of board using costworks

Assignment Help Civil Engineering
Reference no: EM131031553

Board Feet Calculations

For a location in Oshkosh, WI, estimate the total volume, in thousand board feet (MBF), for 100 pieces of 2" x 8", 16-feet-long board by using CostWorks.

Submission Requirements:

Submit the CostWorks format, including all the data and calculations used to estimate the total volume of board.

Reference no: EM131031553

Questions Cloud

How much heat can be stored in a 5-m3 storage space : A large amount of heat can be stored essentially at constant temperature during a phase change process, and thus materials that change phase at about room temperature such as glaubers salt (sodium sulfate decahydrate), which has a melting point of..
Describe how restaurants and hotels different in purchasing : Prepare a 3-4 page paper defining and discussing selection and procurement. Examine the selection and procurement activities of an owner-manager of a restaurant and of a hotel. Describe how restaurants and hotels are different in purchasing and ho..
Show a graph comparing the centre temperature : Show a graph comparing the centre temperature only against time for different temperatures. Annotate to identify important features and explain the meaning of graph - Write a short summary paragraph highlighting advice you would give to the novice..
Describe the law of large numbers : Does this article accurately describe the law of large numbers? Explain your answer.
Estimate the total volume of board using costworks : For a location in Oshkosh, WI, estimate the total volume, in thousand board feet (MBF), for 100 pieces of 2" x 8", 16-feet-long board by using CostWorks.
Videos for law of large numbers : We did a Google search of "videos for law of large numbers" and "videos for the central limit theorem" and found several links.
Prepare cost estimates for components such as excavation : Prepare cost estimates for components such as excavation, masonry, concrete, interior finishes, plumbing, electrical, and heating, ventilation, and air-conditioning (HVAC).
Determine the rate of heat transfer to the plates : If the plates remain in the oven until their average temperature rises to 1000°F, determine the rate of heat transfer to the plates in the furnace.
Determine the rate of heat transfer to the rods in the oven : If the rods enter the oven at 30°C and leave at a mean temperature of 700°C, determine the rate of heat transfer to the rods in the oven.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the maximum quasistatic load

Determine the nominal stress σ at failure if the material has a toughness of the nominal stress is 20 ksi, determine the critical crack length acr at which fracture would occur - Determine the nominal stress σ at failure if the material has a toughne..

  Find the final temperature and the amount of work

Air can be assumed as a di-atomic ideal gas. Find the final temperature and the amount of work ( in kW) required for air compression at a rate of 100 mol/s , from an initial condition of 1 bar an 25 C to 10 bar; for the following ways.

  Four forces act on a small airplane

The slope distance and zenith angle measured from point P to pointQ were 1876.253m and 87.33'24 degrees, respectively. The instrumentand rod target heights were equal. If the elevation of point P is227.965m, above datum, what is the elevation of poin..

  Find the speed of the suitcase at the end of the path

The suitcase has a mass of 15kg, and a constant friction of 15N opposes the motion. She starts with an initial speed of 0 and moves the suitcase a distance of 20m. Find the speed of the suitcase at the end of the path.

  What is fc and d

5 1/8 in thick laminated timber 24ft long column to support a roof 16 kips and floor load 38kips will be applied at 13' 4" from base.

  Distance between the helicopter and the sailboat

A coast guard helicopter hovers between an island and a damaged sailboat. How would you calculate the direct distance between the helicopter and the sailboat? From the island, the angle of elevation to the helicopter is 73 degrees.From the helicopter..

  Magnitude of the maximum compressive bending stress

Find the magnitude of the maximum compressive bending stress and also the magnitude of the maximum tensile bending stress

  Determine the planer density and packing faction for fcc

determine the planer density and packing faction for FCC nickel in (100), (110), and (111 planes. which, if any, of these planes is close-packed

  Determine what is the percent volatile matter in the sample

A suspended solids analysis is run on a sample. The tare mass of the crucible and filter is 55.3520 g. A sample of 260 mL is then filtered and the residue dried to constant mass at 103 degrees C.

  Calculate the mass of the green house gas and ozone

Calculate the mass of the green house gas and ozone depleting substance CFC-11 (chemical Formula = CCl3F) in the atmosphere. Use units of GtC (giga tonnes carbon). Production of this substance is now banned and mixing ratios are slowly decreasing wit..

  How long would it take to reduce h2s concentration

It has been determined experimentally that the reaction follows frst order kinetics with respect to both oxygen andhydrogen sulfide concentrations: d[H2S]/dt =-k[H2S][O2]

  Calculate the missing length and azimuth

During field operations for traverse ABCDEF, some measurements for courses CD and DE were omit-ted due to obstacles. Calculate the missing length and azimuth.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd