Determine what is the largest capacity in passenger per hour

Assignment Help Civil Engineering
Reference no: EM13312093

A runway can serve all 868 or all other jets. Assume the minimum time separation in the approach area is 60 seconds for all 868 and 50 seconds for all other jets. All jets including 868 have a runway occupancy time of 60 seconds. The 868 can carry an average payload of 360 passengers while all other jets have an average payload of 200 passengers.

What is the capacity of the runway when only 868 will be served?

What is the largest capacity in passenger per hour?

Reference no: EM13312093

Questions Cloud

Determine the overflow rate and solids loading of clarifier : An activated sludge aeration tank has a width of 14m, a length of 15m and an effective liquid depth of 4.5m. The secondary clarifier has a diameter of 25m. The plant operating parameters are as follows
Stitching together a business with partners : Stitching together a business with partners
Determine the velocity of the steam at the nozzle outlet : Helium enters an adiabatic steady-state nozzle at 200kPa and 124 degrees Celsius and 10m/s. At the nozzle exit the temperature of the helium is 100 degrees Celsius and the pressure = 150 kPa.
To analyse and comprehend a provided er diagram : Display the item id and the difference between the default price and cost (ITECH5006 - together with a percentage markup) of all products.
Determine what is the largest capacity in passenger per hour : All jets including 868 have a runway occupancy time of 60 seconds. The 868 can carry an average payload of 360 passengers while all other jets have an average payload of 200 passengers.
Develop equation that determines mass of finishing rods : When in use, a fishing rod can be approximated to act as a cantilevered beam. Assume that the force (P) is applied to the end of the beam by a fish while the fisherman rigidly holds the other end of the beam.
Literature review gyms and fitness club at sydney : Literature Review: Gyms and Fitness club at Sydney
Determine the elastic modulus of the composite material : An SAE steel wire (1mm diameter) is coated with another cover to form a composite material with diameter of 2 mm. a) determine the elastic modulus of the composite material;
What is total distance traveled : A person goes hiking on the trails in a Park. The trail leads the hiker 6 km north, 4 km east, 2 km north, 2 km west and 5 km south. what is total distance traveled

Reviews

Write a Review

Civil Engineering Questions & Answers

  Net rate of flow of linear momentum via control surface

Measurements indicate that to cause this flow the force acting on the contents of the control volume is 40i lb. Determine the net rate of flow of linear momentum through the control surface.

  What is the velocity head expressed in atmospheres

What is the velocity head expressed in atmospheres for a rapid filter operated at a surface loading rate of 475 m/d when the local porosity is 0.40?

  Write expression for velocity of point a in terms of theta

The wheel of radius r rolls without slipping and has an angular velocity w. Write an expression for the velocity of point A in terms of theta and show that the velocities of A and B are perpendicular to one another

  Design the pins so that the ledge can support doug

Design the pins so that the ledge can support Doug and Jeremy and eight others on each side of the building. Assume each person weighs 200 lbs.Pin properties: Ultimate shear strength = 100 lb/in^2

  Plot horizontal component of velocity and dynamic pressure

A wave has a height of 1.5 m in water 5 m deep and a wave period of 6 s. Plot the horizontal component of velocity, the vertical component of acceleration, and the dynamic pressure at a point 2 m below the still water level versus time for a 6-s i..

  Determine the coordinates of intersection of line of action

Replace the given forces by a wrench and determine the coordinates of the intersection of its line of action (the coordinate of point P) with the plate. With a Force Fca=(100i+100j)N coming off of point C

  What is the runoff rate into the inlet grate

If the detention storage on the paved section is increasing at the rate of 60 m3/hr, what is the runoff rate into the inlet grate?

  Discuss types of earth moving used in field of engineering

Find the swell for a soil which weighs 1600kg/m in bank and 1300kg/m3 in bank and 1300kg/m3 Loose and what is the shrinkage factor for a mass of soil that takes up 1.5m3 in bank and reduces down to 1.2m3 after compaction

  Oxidization of ammonia during nitirification

what is the final dissolved oxygen concentration (in mg/L) in the waste lagoon after all of the ammonium (NH4 + ) is converted to nitrate? Recall that 4.57 mg of O 2 is need per mg of ammonium (as N) oxidized during nitirification. After all of the..

  What is the mach number of the flow around the aircraft

A jet aircraft flies at a speed of 600 mph at an altitude of 40,000 ft. The atmosphere is the standard atmosphere. (1) What is the air pressure outside the aircraft (2) What is the Mach number of the flow around the aircraft

  Calculate the elavations at vpc-vpt-high point and station

A 2000 ft vertical curve connects to a +3% grade to a -5% grade. If the vertical tangents intersect at station 52+60.55 and elevation 877.62 ft, calculate the elavations at the VPC, VPT, high point and station 54+00.

  Determine the maximum compression of the spring mounted

The 30-Mg freight car A and 20-Mg freight car are moving towards each other with the velocities of VA= 20km/h and VB=10 km/h. A spring mounted on A has k=3 MN/m Determine the maximum compression of the spring mounted on car A.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd