Determine the elastic modulus of the composite material

Assignment Help Civil Engineering
Reference no: EM13312090

An SAE steel wire (1mm diameter) is coated with another cover to form a composite material with diameter of 2 mm.

a) determine the elastic modulus of the composite material;

b) determine the maximum force that the composite will carry before either material yeilds.

Material       Elastic modulus (GPa)         Yeild stress (MPa)

cover                      220                                   140

steel                       205                                   280

Reference no: EM13312090

Questions Cloud

To analyse and comprehend a provided er diagram : Display the item id and the difference between the default price and cost (ITECH5006 - together with a percentage markup) of all products.
Determine what is the largest capacity in passenger per hour : All jets including 868 have a runway occupancy time of 60 seconds. The 868 can carry an average payload of 360 passengers while all other jets have an average payload of 200 passengers.
Develop equation that determines mass of finishing rods : When in use, a fishing rod can be approximated to act as a cantilevered beam. Assume that the force (P) is applied to the end of the beam by a fish while the fisherman rigidly holds the other end of the beam.
Literature review gyms and fitness club at sydney : Literature Review: Gyms and Fitness club at Sydney
Determine the elastic modulus of the composite material : An SAE steel wire (1mm diameter) is coated with another cover to form a composite material with diameter of 2 mm. a) determine the elastic modulus of the composite material;
What is total distance traveled : A person goes hiking on the trails in a Park. The trail leads the hiker 6 km north, 4 km east, 2 km north, 2 km west and 5 km south. what is total distance traveled
What is the maximun driving speed for the car : A 1,8000-kg SUV rounds a flay (unbanked) curve with a radius of 90m. the average coefficients of kinetic and static friction between the tire of the car and the road are static coefficient = 0.85, What is the maximun driving speed for the car
Determine mechanical properties of ametal by concucting test : if you were asked to determine the mechanical properties of ametal by concucting a test, what type of test whould you use, and what data can you abtain from that test
What was the initial speed of ball as seen by gary : Two students perform an experiment with a train and a ball. Michelle rides on a flatcar pulled at 8.35 m/s by a train ona straight, horizontal track. What was the initial speed of ball as seen by Gary

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the concentration of nacl in mg per l

A waste water sample contains 2.092mmol/L NaCl. Calculate the concentration of NaCl in mg/L. What are the mmol/L concentrations of Na and Cl. Na = 23 and Cl = 35.5.

  Mixed liquor volatile suspended solids

For a mixed liquor volatile suspended solids (MLVSS) of 1800 mg/L, what is the total return solids flow rate?

  How will alum floc described in part d need to enter basin

A water treatment plant with a maximum daily flow of 4.4 m3/s is treating surface water with a minimum ambient temperature of -1°C (30°F). The water is coagulated with alum and the alum floc was measured to have a settling velocity of 1.6 m/h at 1..

  What is the level of service of the upgrade segment

On this segment of freeway, the directional peak-hour volume is 3800 vehicles with 2% large trucks and 4% buses (no recreational vehicles), the peak-hour factor is 0.90, and all drivers are regular users.

  Find waters carbonate hardness and noncarbonated hardness

A municipality uses green energy and treats 15 × 106 gal/day of a groundwater containing the following: CO2 = 17.6 mg/L, Ca2+ = 80 mg/L, Mg2+ = 48.8 mg/L, Na+ = 23 mg/L, Alk(HCO3-) = 270 mg/L as CaCO3, SO42- = 125 mg/L, Cl- = 35 mg/L.

  What are the concentrations of the reactants and products

If 0.100 mol each of SO2 and NO2 are placed in a 500 mL vessel at this temperature, what are the concentrations of the reactants and products when equilibrium is established for this reaction?

  Calculate maximum allowable shear force v max for the girder

is fabricated of two 300 mm X 25 mm flange plates and a 800 mm X 16 mm web plate. the plates are joined by four fillet welds that run continuously for the length of the girder. each weld has an allowable load in shear of 920 kN/m.

  Determine how to calculate ph of water at 25 degrees

How do you calculate pH of water at 25 degrees that contains 0.6580mg/l carbonic acid. Assume that [H+] =[HCO3-]at equilibriumand ignore the dissociation of water.

  Determining a maximum safe speed

The central angle is 35 degrees, the superelevation is 0.08, and 20.6 ft is cleared (for sight distance) from the inside edge of the innermost lane. Determine a maximum safe speed (assuming current design standards) to the nearest 5 mi/h.

  Determine flow on the road and space mean speed

Data obtained from aerial photography showed six vehicles on a 600 ft long section of road. Traffic data collected at the same time indicated an average time headway of 3.6 sec.

  Find concentration of silver at chloride concentration raise

The solid silver chloride is placed in water. It reaches equilibrium and has a solubility product constant of 1.8 x 10-10. What is the concentration of silver if the chloride concentration is raised to 3M

  Explain how to estimate the flow rate in the cross section

The river channel itself is 20m wide and flow depth is 5m and the sandy bottom has an n=0.02, the left bank is 40m wide and the flow depth is 0.5m, while the right bank is 100m wide with a flow depth of 1m.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd