User Account

All Pages

Determine what is the illumination on the note pad

Assignment Help Civil Engineering
Reference no: EM13319313

A supervisor is sitting at her desk illuminated by a 180 candela source 3 feet above it. She is writing with green ink (reflectance=30%) on a yellow note pad (reflectance=60%). What is theillumination on the note pad?
Is that sufficient?
If not, what amount of illumination is need?
What is the contrast of the writing task? What is the luminance of the notepad

Reference no: EM13319313

Questions Cloud

Compute the allowable load on a column with fixed ends : compute the allowable load on a column with fixed ends if it is 5.45 meters long and made from an S150 x 18.6(S6 x 12.5) beam. The material is ASTM A36 steel. Use the AISC formula.
Define what is the population ratio when temperature goes up : The frequency of the absorption from the ground to the excited state is 2885 cm-1. What is the population ratio when temperature goes up to 50 oC
Determine the stresses in cables and deflections of points : The steel beam ABCD is simply supported at A (pin) and supported at B and D by steel cables each having a diameter of 12mm. A force of 20 kN is applied at point C. For steel, let E = 209 GPa.
Explain what is the ka of the unknown acid : when 15.12 ml of 0.1194 M NaOH is added to 25 ml of 0.1264 M HX(an unnknown weak acid),the resulting pH is 5.9 . what is the ka of the unknown acid
Determine what is the illumination on the note pad : A supervisor is sitting at her desk illuminated by a 180 candela source 3 feet above it. She is writing with green ink (reflectance=30%) on a yellow note pad (reflectance=60%). What is the illumination on the note pad
Explain the molar concentration of al in the solution : The concentration of SO4 is .5 M in a certain solution of Al2(SO4)3. what is the molar concentration of Al in the solution
Determine the nominal cross-sectional dimensions for douglas : determine the nominal cross-sectional dimensions for a Douglas fir larch No. 1 grade beam of least weight that supports a total uniformly distributed load of 12 kip on a simple thirty-two foot span considering loading in shear
Find total electric flux passing through surface of cube : A charge of 15.0 uC is plaed at the center of a cube. Each side of the cube has an area of 4.50 cm^2 calculate The total electric flux passing through the surface of the cube
Evaluate how many gallons of the strong vinegar : Calculate how many gallons of the strong vinegar would need to be added to the 10,000 gallons of the weak vinegar to obtain a solution that is the appropriate 5.10% acetic acid by mass.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is difference in the density and specific weight of air

What is the difference in the density and specific weight of air if pressure increases from 1 to 50 atmospheres if temperature is kept at 4 degrees Celsius

  What is the level of the service of this compound-grade

If the peak-hour factor is .90 and all of the drivers are regular users, what is the level of the service of this compound-grade freeway segment?

  Determine the values of stress and the change in thickness

A rectangular steel plate with thickness t=0.625 inches is subjected to normal stresses sigma x and sigma y.The strain in the x direction is known to be 0.00065 and the strain in the y direction is known to be 0.0004.

  Estimate the time in days it would take the mtbe to travel

A tracer study was conducted to assess groundwater velocity and showed that a slug of a conservative tracer took 34 days to travel the 10-m distance between two wells.

  Whether proportional limit is exceeding for either material

To prevent this high compression load from buckling the copper pipe, a solid steel support of 2 1/2 inch diameter is placed inside the copper pipe. The copper pipe is 8.000 inches long. The steel support is 8.0001 inches (exactly 1 mil = 1/1000 in..

  Determine at what percent capacity are the trucks operating

Each week 85 trucks bring a total of 2,180 metric tons of municipal solid waste (MSW) to the landfill. Each truck averages two loads per day. Each truck has a capacity of 4.5 metric tons and they operate 5 days/week.

  Draw the shear diagram for the shaft

Draw the shear diagram for the shaft. The bearings at and exert only vertical reactions on the shaft

  Determine its angular acceleration when t starting from rest

The 50mm radius pulley A of the clothes dryer rotates with an angular acceleration of (80^(1/2)A) rad/s, where angle A is in radians. Determine its angular acceleration when t= 2 , starting from rest.

  Calculate size of the critical radius and number of atoms

For maximum undercooling, calculate the size of the critical radius and the number of atoms in the critical nucleus when solid copper forms by nucleation.

  Estimate the minimum number of tugs needed to tow

Simplify the shape of the base and the 4 legs and estimate the minimum number of tugs needed to tow the structure at the required speed. The most powerful tugs can produce a thrust of approximately 2000kN,i.e.200tons.

  Alternative water resource projects

Consider two alternative water resource projects, A and B. Project A will cost $2,533,000 and will return $1,000,000 at the end of 5 years and $4,000,000 at the end of 10 years.

  What is the biomass concentration in the aeration tank

average flow rate = .0022 m^3 /s (190 m^3 /d) Influent Substrate concentration = 250 mg/L as COD (all essentially soluble) Mean cell residence time is to be 5 days Volume of mix tank = 25 m^3 the reactors kenetic constants are

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd