Compute the allowable load on a column with fixed ends

Assignment Help Civil Engineering
Reference no: EM13319317

compute the allowable load on a column with fixed ends if it is 5.45 meters long and made from an S150 x 18.6(S6 x 12.5) beam. The material is ASTM A36 steel. Use the AISC formula.

Reference no: EM13319317

Questions Cloud

Wxplain which have a meso stereoisomer : Which of the following could have a meso stereoisomer. a) 1,2-dichloropentane b) 1,3-dichloropentane c) 2,2-dichloropentane d) 2,4-dichloropentane
Determine what is the volume of rainfall excess : It rains 3.0 in. on a 20.0 acre watershed. What is the volume of rainfall excess if 30% of the watershed area is a lake and infiltration on the soil is estimated at 1.0 in. What is the total volume of runoff.
Explain what happens to kp when the temperature is increased : Suppose the reaction is at equilibrium 2NOBr (g) 2NO(g)+Br2(g) Delta Hf NOBr=82.2 Kj/mol DeltaHf NO=90.4 KJ/mol What happens to Kp when the temperature is increased
Estimate the amount of depression storage in 6-arce parking : Estimate the amount of depression storage (inches and cubic feet) in a 6-arce parking lot using the following rainfall and discharge data. The discharge data were measured at the only outlet in the parking lot.
Compute the allowable load on a column with fixed ends : compute the allowable load on a column with fixed ends if it is 5.45 meters long and made from an S150 x 18.6(S6 x 12.5) beam. The material is ASTM A36 steel. Use the AISC formula.
Define what is the population ratio when temperature goes up : The frequency of the absorption from the ground to the excited state is 2885 cm-1. What is the population ratio when temperature goes up to 50 oC
Determine the stresses in cables and deflections of points : The steel beam ABCD is simply supported at A (pin) and supported at B and D by steel cables each having a diameter of 12mm. A force of 20 kN is applied at point C. For steel, let E = 209 GPa.
Explain what is the ka of the unknown acid : when 15.12 ml of 0.1194 M NaOH is added to 25 ml of 0.1264 M HX(an unnknown weak acid),the resulting pH is 5.9 . what is the ka of the unknown acid
Determine what is the illumination on the note pad : A supervisor is sitting at her desk illuminated by a 180 candela source 3 feet above it. She is writing with green ink (reflectance=30%) on a yellow note pad (reflectance=60%). What is the illumination on the note pad

Reviews

Write a Review

Civil Engineering Questions & Answers

  Explain how to present the geological profile of the terrain

Based on information provided in the survey bulletins and knowing that the landfill is located in the municipality of Duque de Caxias, on the shore of Guanabara Bay opposite Governor's Island (Galeao Airport)

  Determine how many molecules of h20 is the system

A piston cylinder contains 0.8kg of steam (water vapor) at 300 deg C and 1MPa absolute. The steam is cooled at constant pressure until half of the mass condenses.

  Find length of 10 equal-sized aeration basins for treatment

Calculate the length of 10 equal-sized aeration basins for secondary treatment of a wastewater flow of 10 MGD with 20,000 lb of BOD per day for a conventional activated sludge process with a maximum loading of 40 lb BOD/ 1000 ft3*d.

  Find how many ml of water will it take to get 10 pounds

How many mL of water will it take to get 10 pounds of dry aggregate to a moisture content of 5%. 1 kg=2.2 pounds

  Determine the torsional buckling stress

determine the torsional buckling stress for the compression member if the length is 4m and cross section is the form shown. the ends are restrained such that there are not free to warp.given A:5646mm2 Ix:42.63Mmm4 Iy:14067Mmm4 E:210kN/mm2 G:80kN/m..

  Pharmaceutical mixing tank

In year one, a pharmaceutical mixing tank had a market price of $120,000. It replaced an older smaller mixing tank that had a BV of $15,000.

  Determine horizontal component of reaction that pin exert

Determine the horizontal component of reaction that the pin A exerts on the two-member frame. Set F = 500 (Find Ax) Determine the vertical component of reaction that the pin A exerts on the two-member frame.

  Find velocity of each block knowing the relative velocity

The three blocks shown move move with constant velocities. Find the velocity of each block, knowing that the relative velocity of A with respect to C is 300 mm/s upward and that the relative velocity of B with respect to A is 200 mm/s downward.

  What is the minimum bottom width to effect the depth

A trapezoidal channel is to be designed to carry a discharge of 250 cfs at a normal depth of 3.5 ft. The channel is running on a slope of 0.005 ft/ft and the side slopes can be no steeper than 2.5 H on 1 V.

  Determine the time rate of change of pressure at x

A gas flows along the x axis with a speed of v = 5x m/s and a presure of p = 10x^2 N/m^2, where x is in meters. a) Determine the time rate of change of pressure at the fixed location x = 1.

  Find the torsional moment t for the maxiumum shear stress

The pipe has an outside diameter of 60mm and an inside diameter of 50mm. Find the torsional moment T if the maxiumum shear stress is 80MPa.

  Determine the ratio k of the tension in the remaining wire

The small sphere of mass (m) is suspended initially at rest by the two wires. If one wire is suddenly cut, determine the ratio (k) of the tension in the remaining wire immediately after the other wire is cut to the initial equilibrium tension.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd