Determine time average r of total aerodynamic resistance

Assignment Help Civil Engineering
Reference no: EM13316753

An experimental rocket sled weighs 5200 ib abd is propelled by six rocket motors each with an impulse rating of 8600 ib-sec. The rockets are fired at 1 sec intervals, and the duration of each rocket firing is 2sec. if the velocity of the sled 10 sec from the start is 200mi\hr, determine the time average R of the total aerodynamic and mechanical resistance to motion. neglect the loss of mass due to exhausted fuel compared with the mass of the sled

Reference no: EM13316753

Questions Cloud

Determine the subsidence of the clay surface : groundwater is pumped for domestic use from an unconfined aquifer. the thickness of the clay is 40%. after 10 years of pumping, the porosity is reduced to 30%. determine the subsidence of the clay surface.
Find the angular misclosure and the adjusted azimuths : The azimuth from station A of a closed traverse to a control point T1 is 233°12’36”. The azimuth from the last station of the traverse (station G) to a control point T2 is 213°12’15”.
Calculate the time average f of the total force tangent : Calculate the time average F of the total force tangent to the toad exerted on the tires during the 8 s. Treat the car as a particle and neglect air resistance.
How large is the force : Objects A and B are both positively charged. Both have a mass of 118 g, but A has twice the charge of B. How large is the force on A
Determine time average r of total aerodynamic resistance : if the velocity of the sled 10 sec from the start is 200mi\hr, determine the time average R of the total aerodynamic and mechanical resistance to motion. neglect the loss of mass due to exhausted fuel compared with the mass of the sled
What annual volume savings will plant have achieve : The Pomdeterra wastewater treatment plant produces a thick sludge that has a suspended solids concentration of 3.8%. They are investigating a filter press that will yield a solids concentration of 24%.
Polygon traverse are measured : Five interior angles of a six-sided closed polygon traverse are measured as: A=117°20’33”, B=119°47’50”, C=66°36’29”, D=171°52’14”, E=92°55’18”. The angle at F was not measured. If all measurements are assumed to be correct what is the value of angle..
What is the weight of the displaced air : On a perfect fall day, you are hovering at low altitude in a hot-air balloon, accelerated neither upward nor downward. What is the weight of the displaced air

Reviews

Write a Review

Civil Engineering Questions & Answers

  F-m ration for conventional activated sludge plant

A 4000-m 3 /day conventional activated sludge plant has an influent with a BOD5 of 190 mg/L and SS of 225 mg/L. What population would this plant serve?

  Calculate the depth of flow 2 km upstream of the dam

A 12.0 m rectangular channel, having a bed slope of 50 cm/km and a Manning roughness coefficient of 0.015, conveys water at a normal depth of 1.0 m. A dam is built across the channel at which the water depth is 2.0 m.

  Sketch the cycle on p-v coordinates

A quality of water within a piston-cylinder assembly executes a Carnot power cycle. During isothermal expansion, the water is heated from saturated liquid at 50 bar until it is a saturated vapor. The vapor then expands adiabatically to a pressure ..

  Perception-reaction time on a roadway

An engineering student is driving on a level roadway and sees a construction sign 180 m ahead in the middle of the roadway. The student strikes the sign at 56 kph. If the student was traveling at 90 kph when the sign was first spotted, what was th..

  How much caco3 is produced per hour

A slurry containing 20 percent by weight of limestone (CaCO3) is processes to separate pure dry limestone from water. If feed rate is 2000kg/h, how much CaCO3 is produced per hour?

  Calculate the f per m ration for the aeration tank

An activated sludge process receives 4000m^3 / day containing 120 mg BOD /L from the primary settling tank and 3500 m^3/day Containing 25mg BOD/L from the secondary settling tank.

  What is the volume of the solids in dry mass of specimen

The solids in a specimen have a specific gravity of 2.65. If the oven-dry mass of the specimen is 25kg, what is the volume of the solids in it

  How to compute the normal depth of a trapezoidal channel

A trapezoidal channel with a bottom width of 4 feet and side slopes 2:1 (H:V) and a bed slope of 1 percent conveys a discharge of 50,000 gpm. Assume n = 0.025. Compute the normal depth.

  Calculate the critical load for strong-axis buckling

we have the I-section made of steel (E = 29,000 ksi) which is to be used as a column, pinned at the top, and fixed at the base. Bracing is to be added in the direction of the weak buckling axis, at an unknown height, H.

  Determine the new angular speed with moment of inertia

Person spining has his arms outward. The moment of inertia is 52kg*m^2 and ang. speed 3.80 revolutions/ second. if the persons arms are down. moment of inertia goes to 35kg*m^2. find the new angular speed

  Unit of measurement and unit of payment

Write the unit of measurement and unit of payment of following items. 1) Earthwork in excavation in foundation. 2) Framwork. 3) Steelwork in trusses. 4) Damp proof course D.P.C. 5) Cement.

  How to determine the scale reading at t

A large tank is used to calibrate the reading from a flow meter. Measurements of the system weight as a function of time are made. Water enters the tank vertically from the flow metering system at a speed of 20 ft/sec through a 1.5 in.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd