What annual volume savings will plant have achieve

Assignment Help Civil Engineering
Reference no: EM13316751

The Pomdeterra wastewater treatment plant produces a thick sludge that has a suspended solids concentration of 3.8%. They are investigating a filter press that will yield a solids concentration of 24%. If they now produce 33m3/d of sludge, what annual volume savings will they have achieve if they install the press?

Reference no: EM13316751

Questions Cloud

Calculate the time average f of the total force tangent : Calculate the time average F of the total force tangent to the toad exerted on the tires during the 8 s. Treat the car as a particle and neglect air resistance.
How large is the force : Objects A and B are both positively charged. Both have a mass of 118 g, but A has twice the charge of B. How large is the force on A
Determine time average r of total aerodynamic resistance : if the velocity of the sled 10 sec from the start is 200mi\hr, determine the time average R of the total aerodynamic and mechanical resistance to motion. neglect the loss of mass due to exhausted fuel compared with the mass of the sled
What annual volume savings will plant have achieve : The Pomdeterra wastewater treatment plant produces a thick sludge that has a suspended solids concentration of 3.8%. They are investigating a filter press that will yield a solids concentration of 24%.
Polygon traverse are measured : Five interior angles of a six-sided closed polygon traverse are measured as: A=117°20’33”, B=119°47’50”, C=66°36’29”, D=171°52’14”, E=92°55’18”. The angle at F was not measured. If all measurements are assumed to be correct what is the value of angle..
What is the weight of the displaced air : On a perfect fall day, you are hovering at low altitude in a hot-air balloon, accelerated neither upward nor downward. What is the weight of the displaced air
Virtualization software and operating systems : Write a one page synopsis of your experience in loading the virtualization software and operating systems. Include what you learned in the process.
Can the new device be justified at a toll gate : Cars arrive at a toll gate on a freeway according to a Poisson distribution with mean 90 per hour. Average time for passing through the gate is 38 seconds. Drivers complain of the longwaiting time.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the largest mass-m which the frame can carry

The frame is desinged to carry the hanging mass at G equal to 167 kg. The frame is supported by a pin connection at C and the rope AB, and constructed with pin connections at points E, F, and D.

  What is the undrained shear strenght-psf of the clay

an unconfined compression test was conducted on a cylindrical clay specimen with the following properties: Peak load at failure = 4.5lb, diameter of sample = 1.2 in.

  Determine what is the dischage capacity of the pipe

a 96-in diameter cast iron pipe carries water at 60f. the head loss due friction is 1.5ft per 1000ft of pipe. what is the dischage capacity of the pipe

  Explain how to check the beam for deflection

The beam species is douglas fir-larch a) check for beam shear b) check the beam for deflection, knowing deflection limitation is L/360 (given L =12 ft) Given: L=12 Beam Size 9.50" x 10.50" fv= 1.50V/A Deflection Max = 19PL^3/384*E*I

  Is pelton wheel the appropriate turbine type for application

A Pelton wheel located at an elevation of 200.0 m is sued to extract power from a reservoir at an elevation of 800.0 m. A penstock 1500 m long and 0.8 m in diameter connects the reservoir and nozzle of the Pelton wheel.

  Determine the weight w of the container to a ceiling

a container is supported by three cables that are attached to a ceiling. Determine the weight W of the container, knowing that the tension in cable AB is 6 kN

  Determine what external force is required to hold the bend

A pipe 1ft in diameter bends through an angle of 135 degrees. The velocity of flow of gasoline ( S = 0.8) is 20ft/s and the pressure is 10psig in the bend. What external force is required to hold the bend against the action of the gasoline

  How fast is the reservoir surface dropping

The flow out of a reservoir is 2 L/s. The reservoir surface is 5 m x 5 m. How fast is the reservoir surface dropping?

  Discuss bracing types of buildings with real-life example

Discuss bracing types of buildings with real-life example. Provide photograph or sketch for each type of bracing.

  What is the total equivalent future amount of the company

The company expects to spend $100,000 per year for labor and $125,000 per year for supplies before a product can be marketed. At an interest rate of 15% per year, what is the total equivalent future amount of the company's expenses at the end of 3..

  Calculate air flow required in cfm to transfer in hvac duct

Calculate the Air flow required in CFM to transfer 5,004 BTU/Hour in an HVAC duct given that the temperature difference (Delta-T) between the room and the supply air is 23 DegF.

  Explain how to determine the final velocity of the crate

the 100 kg crate is originally at rest on the smooth horizontal surface. If a 200 newton force, acting at an angle of 45 degrees, is applied to the crate for 10 seconds. Determine the final velocity of the crate.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd