Determine the subsidence of the clay surface

Assignment Help Civil Engineering
Reference no: EM13316757

groundwater is pumped for domestic use from an unconfined aquifer. the thickness of the clay is 40%. after 10 years of pumping, the porosity is reduced to 30%. determine the subsidence of the clay surface.

Reference no: EM13316757

Questions Cloud

Design and implement a program that will be run each day : The task requires the development of a single processor program that can subsequently be converted into a multi processor program after the testing of the single processor program is complete.
Maximum deductible contribution : What is the maximum deductible contribution that can be made to one or more deductible IRAs in each of the following instances?
Define what stress will be necessary to the slip plane : Consider a metal single crystal oriented such that the normal to the slip plane and the slip direction are at angles of 42.1* and 48.9*, respectively, with the tensile axis.
What is the angular misclosure of a seven sided closed-loop : What is the angular misclosure of a seven sided closed-loop traverse with measured angles of G B=132°08’23”, A C=133°35’18”, B D=127°15’08”, C E=123°28’37”, D F=99°55’13”, E G =129°09’49”, and F A=154°26’57”. Adjust the angles to eliminate the misclo..
Determine the subsidence of the clay surface : groundwater is pumped for domestic use from an unconfined aquifer. the thickness of the clay is 40%. after 10 years of pumping, the porosity is reduced to 30%. determine the subsidence of the clay surface.
Find the angular misclosure and the adjusted azimuths : The azimuth from station A of a closed traverse to a control point T1 is 233°12’36”. The azimuth from the last station of the traverse (station G) to a control point T2 is 213°12’15”.
Calculate the time average f of the total force tangent : Calculate the time average F of the total force tangent to the toad exerted on the tires during the 8 s. Treat the car as a particle and neglect air resistance.
How large is the force : Objects A and B are both positively charged. Both have a mass of 118 g, but A has twice the charge of B. How large is the force on A
Determine time average r of total aerodynamic resistance : if the velocity of the sled 10 sec from the start is 200mi\hr, determine the time average R of the total aerodynamic and mechanical resistance to motion. neglect the loss of mass due to exhausted fuel compared with the mass of the sled

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine psition-velocity and accelerationof particle

x=1.5t^4-30t^2+5t+10 where x and t are exprerssed in meters and seconds, respectively. Determine the psition, the velocity and the acceleration of the particle when t=4 seconds

  How much lime must be added to react with the alum

If 110 mg/L Alum (Al2(SO4)3 14H2O) is added to water containing a natural alkalinity of 20 mg/L as CaCO3, 1) how much lime (mg/L as CaO) must be added to react with the alum 2) How much precipitate (mg/L as Al(OH)3 ) is formed

  Determine the true horizontal legth of the distance measured

A 100-ft steel tape was used in the field to measure a distance of 247.53 ft. the following data represents the conditions in the field at the time of measurement: tempreture = 41 F, tension = 30 ib, and tape supported at ends only.

  How can utah and other parts of the country

how can Utah and other parts of the country have the same temperature but a different humidity?

  Determine level of service at which the highway will operate

A 3-mi section of a two-lane, two-way highway located in a mountainous terrain is to be designed to carry a peak hour volume of 750 vehicles. Using the operational level of analysis

  Estimate the minimum do and the critical location in river

If the ultimate BOD of the mixed river water is 30mg/L, the rate constant for BOD at 20ºC is 0.6d-1, the reaeration rate constant at 20ºC is 0.8d-1, and the removal of BOD by sedimentation can be neglected

  Calculate the force acting on a window facing the storm

the wind reaches a speed of 27.8 m/s in a storm. calculate the force acting on a 1m x 2m window facing the storm. the window is in a high-rise building. the air density p= 1.2 kg/m3.

  Calculating the force in a punch press

Calculate the force (in Kn) a punch press must exert if it is to punch out a large washer from a strip of 5-mm thick sheet steel with an ultimate shear strength of 400 MPa.

  Determine the concentration and temperature

The following boundary conditions apply at x=0, ca = Keqcao and T=To and at x=L, (dco/dx)=0 and (dT/dx)=0. Determine the concentration and temperature profiles for this system.

  Magnitude of acceleration-along a circular path

The boat is travelling along a circular path with a speed v=(0.0625t). Determine the magnitude of its acceleration when t=10s

  Force required to hold the pipe

A 0.3-m diameter pipeline terminates in a nozzle of outlet diameter = 0.15 m. When water flows through this pipe at a rate of 0.25 m3/s, the force required to hold the pipe (N) is most nearly.

  Determine heat loss from steam passing through turbine

Steam enters a turbine with neglible velocity at 4 mpa, 600 degrees celcius and a flow rate of 36000 kg/h. Determine the heat loss from the steam passing through the turbine if the turbine has a power output of 20000 kw

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd