Determine the resultant line current and power factor

Assignment Help Chemical Engineering
Reference no: EM131113891

A three-phase load, connected to a 440-V bus, draws 120 kW at a power factor of 0.85 lagging. In parallel with this load is a three-phase capacitor bank that is rated 50 k VAR. Determine the resultant line current and power factor.

Reference no: EM131113891

Questions Cloud

Safety net for economic downturns : The Helium Corp has just decided to save $10,000 each quarter for the five years as a safety net for economic downturns. The money will be set aside in a separate savings account that pays 6.25 percent annual rate, with interest compounded quarte..
Explain differences between due process and crime control : Explain the differences between Due Process and Crime Control. What groups may value one over the other? Is one more effective than the other - why or why not
Purchase the proceeds from the lottery : Chris Marlowe just won the state lottery which promises to pay him $1,500 per year for 20 years, starting from today, and $1,850 per year for years 21-45, given a 6.75% discount rate. Your company wants to purchase the proceeds from the lottery f..
Calculate the expected total annual return : Calculate the expected total annual return (euro-based) of the current bond portfolio if Sofia decides to leave the currency risk unhedged. Show your calculations. Explain, with respect to currency exposure and forward rates, the circumstance in whic..
Determine the resultant line current and power factor : Determine the resultant line current and power factor.
Exemplary programs operated by correctional systems : Select a program area that you would like to explore to determine the best practices or exemplary programs operated by correctional systems
Explain the need for local law enforcement : Explain the need for local law enforcement to monitor such world events. Give examples of how monitoring can be accomplished or compile a list of waysto formally monitor world events
Reasons that entrepreneurs may not actually obtain : What are some of the reasons that entrepreneurs may not actually obtain debt financing, though they might very much need it?
Arrangement of identical spheres : Calculate the percentage of unoccupied space in a close-packed arrangement of identical spheres.

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Calculate the brake-kw power needed

1. It is desired to use 28.32 m 3 /min of air (metered at a pressure of 101.3 kPa and 294.1 K) in a process. This amount of air which is at rest enters the fan suction at a pressure of 741.7 mm Hg and a temperature of 366.3 K and is discharged at a p..

  What is the equivalent value for a measure value of 150 ppm

If the face opening for a laboratory hood installation is to be 2 feet high and 5 feet wide, what volumetric flow rate is required to generate a face velocity of 100 ft/min?

  Both a negative gain and a right-half plane zero

What is the order of the overall transfer function, G(s) = V(s)/U(s)? (b) What is the gain of G(s)? Under what condition(s) is the process gain negative?

  Propose a model which will show how temperature

Propose a model which will show how temperature in the tank changes with time. State assumption used. Solve this model to obtain T(t) given that T(t=200s) = 50°C.

  Explain the reasons for changes in flow depth near the hump

Explain the reasons for changes in flow depth near the hump using concepts of specific energy.

  Draw circuit diagrams and show polarity markings

Draw circuit diagrams and show polarity markings.

  Seperate phosphoric acid from aqueous calcium chloride

What is the best solvent to seperate phosphoric acid from aqueous calcium chloride solution

  Power recovered from the preheated gases

If the gases leave the tower at 6 atm, 25 °C, and are expanded to, say, 1.5 atm, calculate the turbine exit gas temperatures without preheat, and if the gases are preheated to 400 °C with the reactor off-gas. Also, estimate the power recovered fro..

  Calculate the percentage conversion of hexane

The stack gas emerges at 760 mm Hg. Calculate the percentage conversion of hexane, the percentage excess air fed to the burner, and the dew point temperature of the stack gas.

  Hydrogenation of phenol to a mixture

Adipic acid is used in the manufacture of nylon 6,6. It is made by hydrogenation of phenol to a mixture of cyclohexane and cyclohexane (known as KA oil-ketone and alcohol), followed by oxidation with nitric acid.

  Calculate diffusion coefficient in this binary gas mixture

The bulbs, which arestirred and of equal volume, initially contain binary gas mixtures of different compositions.At time zero, the valve is opened; at time t, the valve is closed, and the bulkcontents are analyzed. Explain how this information can..

  What operator response would be required in each case

Which alarms should activate a shutdown trip, and which valves should be closed?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd