Determine the magnitude and coordinate direction angles

Reference no: EM13562682

If the coordinate direction angles for F3 are a=120degrees, b=45degrees, y=60degrees, determine the magnitude and coordinate direction angles of the resultant force acting on the eyebolt.

Picture: It is an eyebolt hook in a wall, F1=700lbs in the x-y axis and 30 degrees from the x axis. F2=600lbs, in the y-z axis with the force angle being a 3-4-5 triangle. F3=800lbs in the z-y axis

Reference no: EM13562682

Questions Cloud

Determine the value of k : A well pump test was made in a surface layer of sand 10m thick overlying impervious clay. Before the test the water table was at 1.5m depth. After steady state had been reached in the tests

Determine the coliform concentration at the beach : An ocean outfall diffuser that discharges treated wastewater into the Pacific Ocean is 500m from a public beach. The wastewater contains 105 coliform bacteria per milliliter. The wastewater discharge flow rate is 0.3 m3/s. The coliform first order de..

Find a liquid to be used in the towing tank that allows both : A 1:40 scale model of a ship is tested in a towing tank. Prototype operates in seawater at 60 F. Find a liquid to be used in the towing tank that allows both Froude and Reynolds scaling for the model and the prototype.

Determine the allowable stress design reference : Determine the Allowable Stress Design (ASD) reference and adjusted design values for the following members and loading conditions. All members are No. 2 Hem-Fir and are fully braced to prevent lateral-torsional buckling. Bending occurs about the stro..

Determine the magnitude and coordinate direction angles : If the coordinate direction angles for F3 are a=120degrees, b=45degrees, y=60degrees, determine the magnitude and coordinate direction angles of the resultant force acting on the eyebolt.

When finding the projection of p onto q what do you do : Force P is directed from point A(5,10,3) towards point B(1,-2,5) and has a magnitude of 15N. Vector Q=6i+2j-5k. When finding the projection of P onto Q what do you do with the 15N?

Compare the performance reactors/reactor combinations : Assume that a chemical reaction involving the removal of a given contaminant follows first order kinetics. The rate constant, k, is 0.5 hr-1. Compare the performance of the following reactors/reactor combinations. Provide your comments your results. ..

Design a curve for the highway by computing the radius : A horizontal curve is being designed for a new two-lane highway(12-ft lanes). The PI is at station 250 + 50, the design speed is 65 mi/h, and a maximum superelevation of 0.07 ft/ft is to be used

Determine the crest and sag vertical curves required : Two level sections of an east highway (G=0) are to be connected. Currently, the two sections of highway are seperated by a 4000-ft (horizontal distance), 2% grade. The westernmost section of highway is the higher of the two and is at elevation 100 ft..

User Account

All Pages