Determine the gage pressure in the water tank a

Assignment Help Civil Engineering
Reference no: EM13305653

A manometer connects a large water tank open to the atmosphere to a closed spherical tank of air. The manometer contains both oil and water. Find the gage pressure in the tank "A".

Reference no: EM13305653

Questions Cloud

Determine the amount of coal required from the prb : The coal may either be moved by train from the mine to power plants near where the power is used, or the coal could be combusted near the mine mouth to generate electricity and the electricity could be transmitted over long distances to the users.
Calculate the work done cranking the aluminum cylinder : The diameter of the aluminum cylinder is measured to be: (4.935 ±0.003)cm. The hanging mass (paint bucket and 5kg) for a Mechanical Equivalent of Heat experiment is recorded as (5.2977 ±0.0002)kg. Calculate the work done cranking the aluminum cylin..
What is the main factor that causes deviation of the market : What is the main factor that causes deviation of the market value and its par value? Accompany your answer with an example that covers all different scenarios in fluctuation of the value of the bond.
Determine the pressure due to the ocean : The greatest ocean depths on the Earth are found in the Marianas Trench near the Philippines. Calculate the pressure due to the ocean
Determine the gage pressure in the water tank a : A manometer connects a large water tank open to the atmosphere to a closed spherical tank of air. The manometer contains both oil and water. Find the gage pressure in the tank "A".
Determine the peak discharge that would result no ponds : Suppose a drainage basin has an area of 288 acres with a CN=55(Runoff Coef. of 0.30). Determine the peak discharge (in cfs) that would result from a 6.0in., 24-hr assuming there are no ponds and swampy areas.
How large must his payments be to ensure : how large must his payments be to ensure that after retirement he will be able to draw $30.000 per year from this account until he is 80?
What is fielding projected total receipts : Excess short term borrowing (if any exists)Fielding has no short term borrowing as of March 1st, 2008. assume that the interest on short term borrowing is 1% per month. What is fielding 's projected total receipts (collections) for april?
Determine the horizontal and vertical components of reaction : Determine the horizontal and vertical components of reaction at the pin supports at A and B and indicate direction. Take F1 = 7 KN, F2 = 6 KN, and h = 1 m.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what percent of the hocl is dissociated

A solution of HOCl is prepared in water by adding 15 mg HOCl to a volumetric flask, and adding water to the 1.0 L mark. The final pH is measured to be 7.0. What are the concentrations of HOCl and OCl

  What is temperature of the tires of the increase pressure

A motorists inflates the tires of her car to a gauge pressure of 180 kilopascals on a day when the temperature is -8.0 degrees Celsius. When she arrives at her destination, the tire gauge pressure has increased to 245 kilopascals.

  Explain the difference between piezometer and tensiometer

Briefly explain the difference between piezometer and tensiometer with respect to the working principle, special design consideration and limitation of the instrument.

  Find mu and vu for the beam in a rectangular concrete

The beam is simply supported and spans 25 feet. The beam must be designed for a superimposed uniformly distributed dead load of 1 kip/ft, and a concentrated live load of 12 kips that acts 10 feet from one of the supports.

  Determine what is the angular velocity and acceleration

a belt sander is being brought up to operating speed at the instant of the belt is rotating in the clockwise direction ar 4 ft/s and acceleration at 40 ft/s. the tensioning cylinders A and B have a radius of 2.5 in.

  Find the flow rate in m3 per s when water flows uniformly

Water flows uniformly in a 6 m wide rectangular channel at a depth of 0.8m. The channel slope is 0.0015 and n=0.014. Find the flow rate in m3/s

  Well-known architect frank lloyd wright

Many years ago, well-known architect Frank Lloyd Wright designed a mile-high skyscraper, which has never been built.

  Determine what is the radius of gyration of the wheel

A 500 lb flywheel is shown. A 100 lb block is held by a light cable wrapped around the hub of the flywheel the radius of which is 2 ft. If the system is released from rest and the weight has a velocity of 11 ft/sec after 5 s

  Determine what is the channel and flow classification

An obstruction is lodged in a 10-ft wide rectangular channel (n = 0.022) that has a botom slope of 0.005. The depth of the channel just upstream of the obstruction is 5.0 ft. If the flow rate is 325 cfs, what is the channel and flow classification

  Calculating sand shear strength

Estimate the effective friction angle for the sand (assume c' = 0). Calculate the sand's shear strength (τf) on a horizontal plane at depths of the 20 ft and 50 ft.

  Determine the normal stress in a soccer ball at pressure

Determine the normal stress in a soccer ball if the internal pressure is 110 kPa, the outside diameter is 220mm and the wall thickness is 3mm .

  Determine what is the air void content of core 2

Two tests are taken from the compacted mixture and checked for density. Core 1 had a density of 150 pcf and an air void content of 6.5 %. Core 2 had a density of 151 pcf. What is the air void content of core 2

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd