Determine the amount of coal required from the prb

Assignment Help Civil Engineering
Reference no: EM13305657

Approximately 1 billion tons of coal are burned annually in the United States, providing 50% of the country's electricity consumption. The coal may either be moved by train from the mine to power plants near where the power is used, or the coal could be combusted near the mine mouth to generate electricity and the electricity could be transmitted over long distances to the users. As a case study of this trade-off, consider electricity use in Dallas, which is generated, in part, using coal from the Powder River Basin (PRB) in Wyoming. Power plants using PRB coal supply 6.5 billion kilowatt hours of power per year to the Dallas area, at an average conversion efficiency (energy in the generated electricity per energy in the fuel burned) of 33%. The coal mined at the PRB has a heat content of 8340 Btu/lb coal. coal (1 kWhr = 3412 BTU)

a. Determine the amount of coal required from the PRB to support consumers in Dallas.

b. If the energy required to transport coal by train is 0.0025 gallons per ton mile, and the distance from the PRB to Dallas is 1000 miles, calculate the amount of energy required to transport the coal to Texas, and the total energy consumed in combustion and transport. What fraction of the total energy is consumption is due to transport? Assume that diesel fuel has an energy content of 124,000 BTU/gal.

c. Calculate the amount of coal consumed if the electricity were generated at the mine (assume a 33% power plant efficiency) and if the transmission losses for the electricity, from the mine to Dallas were 7%.

Reference no: EM13305657

Questions Cloud

Determine what is the maximum intensity : During a 60 minute storm the following amounts of rain fell during successive 15 minute intervals: 33mm, 23mm, 15mm, and 5mm. What is the maximum intensity
Find the value of theta at which the particle falls off : A small sphere of mass m and radius r slides down a smooth stationary large sphere of radius R under the action of gravity from a position of rest at the top. Find the value of theta at which the particle falls off
Which of the following statements is not a mechanism : Which of the following statements is NOT a mechanism to reduce the agency problem and motivate managers?
Find aeroplans revenue recognition policies : Find and read Aeroplan's revenue recognition policies from their 2010 annual report(available on Mycourse) and answer the question - Identify the different points in time that Aeroplan recognizes revenue.
Determine the amount of coal required from the prb : The coal may either be moved by train from the mine to power plants near where the power is used, or the coal could be combusted near the mine mouth to generate electricity and the electricity could be transmitted over long distances to the users.
Calculate the work done cranking the aluminum cylinder : The diameter of the aluminum cylinder is measured to be: (4.935 ±0.003)cm. The hanging mass (paint bucket and 5kg) for a Mechanical Equivalent of Heat experiment is recorded as (5.2977 ±0.0002)kg. Calculate the work done cranking the aluminum cylin..
What is the main factor that causes deviation of the market : What is the main factor that causes deviation of the market value and its par value? Accompany your answer with an example that covers all different scenarios in fluctuation of the value of the bond.
Determine the pressure due to the ocean : The greatest ocean depths on the Earth are found in the Marianas Trench near the Philippines. Calculate the pressure due to the ocean
Determine the gage pressure in the water tank a : A manometer connects a large water tank open to the atmosphere to a closed spherical tank of air. The manometer contains both oil and water. Find the gage pressure in the tank "A".

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is runoff coefficient in a basin located

What is the runoff coefficient in a basin located near the middle of the climatic spectrum, with annual precipitation P = 32 in, ecosystem evapotranspiration ET = 22 in, and baseflow U = 3 in

  Explain what offers no restraint to motion in the y-z plane

The cable is taut and prevents motion of point B in the x-z plane (i.e. acts as a pin for y-axis buckling), but offers no restraint to motion in the y-z plane (i.e. is unsupported for x-axis buckling).

  Calculate the change in the spheres internal energy in kj

During the process 40 kJ of heat is transferred from the sphere, while the sphere receives energy in the form of work equal to 20kcal. calculate the change in the sphere's internal energy in kJ.

  Compute the critical depth and critical velocity for flow

A rectangle channel 20 feet wide carries a discharge Q= 200cfs. Compute the critical depth and critical velocity for the flow in the channel.

  Volume of the lake

Suppose that the distance from the lake outlet to the withdrawal cannot be more than 20 mi. What should be the new volume of the lake?

  What is the net force acting on the body

Starting from rest, a 4.0-kg body reaches a speed of 8.0 m/s in 2.0 s. What is the net force acting on the body?

  What are the surface overflow rate

a rectangular clarifier with a length:width ratio of 3:1 receives a flow of 850m3/day. the clarifiers depth is 4.0m and the detention time of the water inthe clarifier is 2.4 hrs, what are the surface overflow rate and the horizontal flow through ..

  Define flow at a hydraulic jump in terms of flow

Define flow at a hydraulic jump (upstream and downstream) in terms of the types of flow and corresponding Froude number. What is the depth of water at each section (upstream and downstream) compared to critical depth

  How to determine the friction force on the floor

The crate has a wieght of W = 350lb., and the coefficients of static and kinetic friction are us = 0.3 and uk = 0, respectively. Determine the friction force on the floor. Theta = 45 degrees and P = 100lb.

  Describe a dynamic programming algorithm

Describe a dynamic programming algorithm to find an independent set of T such that the sum of numbers of nodes in the set is the largest among all possible independent sets of T.

  Calculate pressure in point 1 nd density of manometric fluid

A U manometer reads 20 cm air as operating fluid and a given manometric fluid. A single branch closed tube reads 35 cm connected to point 1. If P2 = 1.2 ATM calculate the pressure in point 1 and the density of the manometric fluid.

  Determine diameter of the shaft at allowable shear stress

The pulley at B is connected to a motor that is driving the system. The other three pulleys are consuming the power delivered by Pb . Pa = 20kW, Pb = 75kW, Pc = 30kW, and Pd = 25kW and the shaft is rotating at 120rpm.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd