Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
In the determination of the average velocity of flow in wide rivers, it is common practice to estimate the average velocity in a vertical section by making a single measurement at a distance below the water surface equal to 60 percent of the depth. Assuming the following equation represents the true distribution in the vertical, determine the actual distance below the surface at which the velocity, u, equals the depth-averaged velocity, U. Provide a plot of your results.
(u-U)/(U*sqrt(f)) = 2 log (y/h) +0.88
u = velocity at a distance y above the river bed
U = depth-averaged velocity
h = flow depth
f = friction factor (a dimensionless constant)
What is the definition of a customer? What are some examples of internal and external customers? Is the measurement of customer satisfaction different for internal customers than for external customers?
determine the nominal cross-sectional dimensions for a Douglas fir larch No. 1 grade beam of least weight that supports a total uniformly distributed load of 12 kip on a simple thirty-two foot span considering loading in shear
A laptop has a four year life span with an initial cost of $900 and $100 salvage value. According to the straight line method what is the depreciation charges you expect on the laptop
Heat is now added until the quality is 40 percent. Determine the minimum entropy change of the thermal energy reservoir supplying this heat.
A MH at an intersection has an inflow from three 8-inch PVC (n = 0.01) sanitary sewer pipes laid at minimum slope converging at an intersection and one pipe taking the flow from those three further downstream.
Raw primary sludge at a solids concentraion of 4% is mixed with waste activated sludge at a solids concentration of .5%. The flows are 20 and 24 gal/min respectively. What is the resulting solids concentration
A normally consolidated clay soil has angle of friction = 20 degrees and effective stress angle of friction = 28 degrees. If a consolidated undrained test is conducted on this clay with an all around pressure of 21.5 lb/in^2
The velocity of the bed is limited to a maximum value of 150 mm/s to the right and 300 mm/s to the left; the acceleration is successively equal to 150 mm/s^2 to the right, zero 150 mm/s^2 to the left, zero, etc.
What is the runoff coefficient in a basin located near the middle of the climatic spectrum, with annual precipitation P = 32 in, ecosystem evapotranspiration ET = 22 in, and baseflow U = 3 in
You are going to assemble 1,000 bolt + hole combinations. The bolts have a mean diameter of 1.000 cm, normally distributed with standard deviation of 0.010 cm. The holes have a mean diameter of 1.030 cm, normally distributed with standard deviatio..
The basic barometer can be used to measure the height of abuilding. If the barometric readings at the top and at the bottomof a building are 28.7 and 29.7 in Hg, respectively, determine the height of the building in feet.
A rod was held on point B and the telescope is inclined so that the horizontal cross line of the transit intersects the rod at the 5.2 ft mark. If the reading on the vertical limb of the transit was +25° 19',
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd