Construction for the shell and the tubes

Assignment Help Chemical Engineering
Reference no: EM131157545

In the manufacture of aniline by the hydrogenation of nitrobenzene, the off-gases from the reactor are cooled and the products and unreacted nitrobenzene condensed in a shell and tube exchanger. A typical composition of the condensate is, kmol/h: aniline 950, cyclo-hexylamine 10, water 1920, nitrobenzene 40. The gases enter the condenser at 230 °C and leave at 50 °C. The cooling water enters the tubes at 20 °C and leaves at 50 °C. Suggest suitable materials of construction for the shell and the tubes.

Reference no: EM131157545

Questions Cloud

Design a suitable packed column for this duty : The column will operate at 1.1 bar and ambient temperature. If necessary, the aqueous stream may be recirculated to maintain a suitable wetting rate.
Evaluate the potential impact of the expanded facility : Define the target audience, determine the marketing objectives, determine resource requirements, define how the marketing message will be delivered through integrated marketing communication, specify the media plan, and discuss how the marketing ..
What strategic direction might it take with its product line : Edward Smeets is the new sales manager for Grunwald Instrumentation. He has just come aboard to head up a sales force of seventy sales professionals, all of whom possess at least a B.S. in a scientific field. Many have Master's Degrees..............
Why should cdc software company implement a ppm : Why should CDC Software Company implement a PPM? You work for Holt consulting company, which has been asked to recommend organizational improvements for CDC Software Company.
Construction for the shell and the tubes : The gases enter the condenser at 230 °C and leave at 50 °C. The cooling water enters the tubes at 20 °C and leaves at 50 °C. Suggest suitable materials of construction for the shell and the tubes.
Describing the heat transfer rates : What is the final equation describing the heat transfer rates and the change of temperature of the coffee in the cup?
What are the basic principles behind the agile process : What are the basic principles behind the AGILE process? What is the PM's role under the AGILE process? Describe each level and discuss whether each level can overlap with another level, and also define its level of risk.
What annual production of glutamic acid can be achieved : What annual production of glutamic acid can be achieved in a batch fermentation plant that has four 10,000 liter reactors? The reactors have jackets that can be used for steam heating or water cooling, but no internal coils.
What are some of the major concerns and considerations : Take a look a few of the websites for Kellogg Company in other countries. How do their marketing efforts in these countries differ? Do they offer the same products everywhere? What are some of the major concerns and considerations related to inte..

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Determine the final state if cooling is at constant volume

Wet steam at 200 °C with 80% moisture is heated by removing 600 kJ/kg of heat. Determine the final state (pressure and temperature and quality, if a two-phase system) if cooling is at constant pressure.

  Number of acidic hydrogens

A 0.250-g sample of citric acid dissolved in 25.0 mL of water requires 37.2 mL of 0.105 M NaOH for complete neutralization. What number of acidic hydrogens per molecule does citric acid have?

  Determine the electromagnetic force on the plunger

In Problem 12.4.1 neglect the saturation of the core, leakage, and fringing. Neglect also the reluctance of the ferromagnetic circuit. Assuming that the cross-sectional area of the center leg is twice the area of the outer legs, obtain expressions..

  Compute the flux linkage as a function of time

The 50-turn coil in the configuration of Figure P12.1.3 is rotated at a constant speed of 300 r/min. The axis of rotation is perpendicular to a uniform magnetic flux density of 0.1 T. The loop has width w = 10 cm and length l = 1 m

  Which component will you add and in what amount

Regardless of your answer in part (b), your supervisor instructs you to add 0.2 moles of normal octane per mol of solution. This new stream is flashed and the vapor and liquid streams are separated. The available information for the streams in the..

  Compute the efficiency when the transformer delivers half

chalf its rated kVA at 0.85 power factor lagging.

  Specify the required continuous-rated hp of the motor

A synchronous motor operates continuously on the following duty cycle: 50 hp for 8 min, 100 hp for 8 min, 150 hp for 10 min, 120 hp for 20 min, and no load for 14 min.

  Develop the four first-order ordinary differential equations

Develop the four first-order ordinary differential equations that model the Michaelis-Menten equation when the transition step from ES to E + P is reversible (not assumed to be irreversible).

  Calculate the developed torque

If the torque lost due to friction and wind age is 7% of the shaft torque, calculate the developed torque.

  Physical properties of toluene

The ship must unload 1000 metric tons within 5 hours to avoid demurrage charges. Estimate the power required by the pump. Take the pump efficiency as 70%. Physical properties of toluene: density 874 kg/m3, viscosity 0.62 mNm-2 s.

  Estimate the temperature of saturated steam

Estimate the temperature of saturated steam which must be used when the exchanger is new (i.e., no scale present) if the water enters the unit at a rate of 15,000 gph and is heated from 70 to 150°F.

  The path followed by a fixed amount of a perfect gas during

the path followed by a fixed amount of a perfect gas during a reversible process is described by the following

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd