Calculate the minimum set-back distance required

Reference no: EM13535631

1.What is the formula to calculate productivity of : 1- asphalt batch plant, 2- concrete batch plant, 3- truck mixer

2.Calculate the minimum set-back distance required for a national highway of 4 lane divided carriageway having circular curve of radius of 350 m & design speed 100 km/hr.

Reference no: EM13535631

Questions Cloud

Write the equation of the line with slope : Write the equation of the line with slope 4 and y-intercept (0, –5). Then graph the line.

What was the hourly rate of temperature change : If the graphs of the functions f(x) and g(x) intersect at the point (–5, –6), then {–5} is the solution to the equation f(x) = g(x).

How long would it take both of them working together : Working by herself, Penny can paint a billboard in 6 hours. Her new apprentice, Brian, requires 12 h to do the same job. How long would it take both of them working together to paint a billboard?

Calculate the temperature of the fresh concrete : A 1: 1½ : 3 mix (by mass) has a water/cement ratio of 0.4 and a cement content of (400) kg/m3. The temperatures of the ingredients are as follows

Calculate the minimum set-back distance required : Calculate the minimum set-back distance required for a national highway of 4 lane divided carriageway having circular curve of radius of 350 m & design speed 100 km/hr.

List the advantages of compressed natural gas : List the advantages and disadvantages of the following alternative fuels: ethanol, methanol, biodiesel, compressed natural gas, and liquid petroleum gas.

Find the settling velocity of a 20 µm diameter particle with : Find the settling velocity of a 20 µm diameter particle with density 1500 kg/m3. If this particle had been hurled to a height of 8,000 m during a volcanic eruption, estimate the time required to reach the ground

What is the step method for drawing raft foundation : A long line of burning agricultural waste emits 0.3 g/m/s of particulate matter on a clear fall afternoon with winds blowing 3 m/s perpendicular to the line. Estimate the ground-level particulate concentration 400 m downwind from the line.

What must the hydraulic detention time be in the aeration : Although primary and secondary sedimentation is responsible for the removal of some BOD, you will design a bioreactor which removes 85% of BOD entering the plant using an activated sludge bioreactor. Use the following values: Influent (to bioreactor)..

User Account

All Pages