Calculate the depth of water at each end of the tank

Reference no: EM13542351

A rectangular tank 2.0m wide, 4m long, and 2m deep contains water to a depth of 1.0m It is accelerated horizontally at 3m/s^2 in the x direction.

a.Calculate the depth of water at each end of the tank

b.Calculate the total force on each end of the tank

Reference no: EM13542351

Questions Cloud

What are the measures adopted to enhance sufficient : In incremental launching method of bridge construction, what are the measures adopted to enhance sufficient resistance of the superstructure during the launching process?

Why is a length of about 1.25l bridge segment is constructed : In the construction of a two-span bridge (span length = L) by using span-by-span construction, why is a length of about 1.25L bridge segment is constructed in the first phase of construction?

What do you think is the best ratio of b/y to use in your : A canal of rectangular cross-section and an n=0.030 is to be laid on a slope of 0.002 and is to carry a discharge of 30 m3/s. Calculate the cross-sectional area required for the channel to carry this flow based on the norma

Determine the normal depth and critical depth in a trapezoid : Determine the normal depth and critical depth in a trapezoidal channel with a bottom width of 12.5 m, side slopes of 2:1, and a bed slope of 0.003 m/m.

Calculate the depth of water at each end of the tank : A rectangular tank 2.0m wide, 4m long, and 2m deep contains water to a depth of 1.0m It is accelerated horizontally at 3m/s^2 in the x direction.

Water is transferred at a rate of 2.1cfs from reservior : Water is transferred at a rate of 2.1cfs from an upper reservoir to a lower reservoir by a concrete pipe 3000ft long. The difference in water level is 60ft. Determine the size of pipe for a water temperature of 60 degrees Fahrenheit. Apply The Darcy-..

At what depth of flow does the vehicle begin to move : You are in charge of evaluating the safety (hazard) of a low water crossing. Traffic surveys show that the "Aaverage"vehicle using the crossing is semi-rectangular in shape (10 ft long, 5 ft wide, and 4.0 ft high - not including the distance from the..

Estimate the required stack height for wind speeds of 4 : A plant is to be constructed that will emit 3.5 metric tons of hydrogen sulfide per day. One of the design criteria is that the concentration 1 km downwind from the stack

Find the diameter of the tube to accomplish this : It is desired to transmit 300mm^3/s of gasoline at 20 degree Celsius through a 650mm long horizontal tube with a head loss of 500mm Find the diameter of the tube to accomplish this.

User Account

All Pages