Explain basic need of design of shock transmission unit, Civil Engineering

Assignment Help:

Explain the Basic requirement of Design of shock transmission unit?

The STU must withstand the specified design load. The stroke of the piston must be bigger than the movement of deck due to temperature, shrinkage & creep in each direction of the deck's longitudinal movement. Just to give an idea about the movement of deck to the readers, the movement of the deck was for +40 mm to -90 mm. The maximum life expected for an STU is around 75 years subject to appropriate maintenance being performed by the user.


Related Discussions:- Explain basic need of design of shock transmission unit

Foundation, Explain briefly shallow foundation?

Explain briefly shallow foundation?

Determine the total lateral pressure on the wall, A masonry retaining wall ...

A masonry retaining wall is 1.5 m wide at the top, 3.5 m wide at the base and 6 m high. It is trapezoidal in section and has a vertical face on the earth side. The backfill is leve

Survey 1, describe how you would range a surveying line betwen two point wi...

describe how you would range a surveying line betwen two point wich are not entervisible?

Design volume of the aeration basin - sewer construction, Design volume of ...

Design volume of the aeration basin - sewer construction: Problem: What is the design volume of the aeration basin? Solution Assuming that 30% of the plant influe

Determine the allowable pressue, The data profile as shown in Figure is obt...

The data profile as shown in Figure is obtained. A best average of N values gave N 10 = 21, column loads including dead and live loads ranged from 500 kN to 950 kN. Determine the

Bridge abutment be placed under an embankment, Question It should be necess...

Question It should be necessary that raking piles of a bridge abutment be placed under an embankment ? Answer For a bridge abutment to be supported on raking piles with dive

Determine about the pre-stressed concrete beam, Determine about the pre-str...

Determine about the pre-stressed concrete beam A pre-stressed concrete beam has a width of 200 mm and an overall depth of 400 mm. The permissible stresses in tension and compre

Determine the uniformly distributed load, A rectangular area 4 m × 6 m carr...

A rectangular area 4 m × 6 m carries a uniformly distributed load of 100 kN/m 2 at the ground surface. Estimate the vertical pressure at a depth of 6 m vertically below the centre

Riveted and welded joints, Riveted and Welded Joints: This theory deal...

Riveted and Welded Joints: This theory deals with riveted and welded connections. In riveted connections, you have learnt different types of rivet and various parameters perta

Write Your Message!

Captcha
Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd