Friction between the floor and the base of the ladder

Assignment Help Civil Engineering
Reference no: EM13549253

1.A uniform ladder with a mass of 15 kg is placed on a frictionless vertical wall. An 80 kg person climbs up the ladder. If the coefficient of friction between the floor and the base of the ladder is 0.15, how far did the person climb?

2.The dissolved oxygen of sample water is 1.5 mg/L. At 25 C, the dissolved oxygen of the dilution water is 8.25 mg/L. You are told the BOD5 of the sample is 130 mg/L. You have a target final dissolved oxygen of 3.0 mg/L (give yourself some leeway). What should the sample volume be?

3.Modify function random0 so that it can accept 0, 1, or 2 calling arguments. If it has no calling arguments, it should return a single random value. If it has 1 or 2 calling arguments, it should behave as it currently does.

Reference no: EM13549253

Questions Cloud

What is the normal depth in a 4-foot wide rectangular : What is the normal depth in a 4-foot wide rectangular channel that conveys a discharge of 100 CFS and has a bed slope of 2% with a Manning’s roughness coefficient of 0.025? a).1.3 feet b).2.7 feet c).4.4 feet d).6.2 feet
How many gallons would be required to last the same time : How many gallons would be required to last the same time as the gas? The sodium hypochlorite solution strength is 15 percent by weight and has the same unit weight as water (specific gravity 1.0). One pound of sodium hypochlorite has the same disinfe..
What concentration would correspond to a risk : The drinking water standard for dioxin is 3 x 10-8 mg/L. Using EPA exposure factors for residential consumption, what lifetime risk would this pose? What concentration would correspond to a risk of 10-6? The following data and assumptions apply: Data..
What is the volume of the lake in cubic feet : A shallow lake can be considered a CFSTR. Nitrification, the conversion of ammonia to nitrate (NH3 -> NO3-) occurs in the lake according to first – order kinetics. One stream feeds the lake and one stream empties the lake with the flow rate in both b..
Friction between the floor and the base of the ladder : Modify function random0 so that it can accept 0, 1, or 2 calling arguments. If it has no calling arguments, it should return a single random value. If it has 1 or 2 calling arguments, it should behave as it currently does.
What is the estimated uncertainty in the length of this : The base line vector between the base and roving reciever is 8340m and has an accuracy of +/-(1to 2 cm +/-2ppm). What is the estimated uncertainty in the length of this vector?
What is the terminal settling velocity of a particle with : What is the terminal settling velocity of a particle with a specific gravity of 1.4 and a diameter of 0.01 mm in 20 degrees celcius water?
Use the gamma of water is equal to 1000 kg/m^3 : A horizontal 150mm pipe, in which 40 l/s of oil (S=.8) is flowing, contracts to a 75 mm diameter (left to right). If the pressure in the 150mm pipe is 300kPa, calculate the magnitude and direction of the horizontal force exerted on the contraction
Write an m-file to calculate the factorial function of n : Write an M-file to calculate the factorial function of N!, as defined by: N!=1 N=0 N!=N*(N-1)*(N-2)*...*3*2*1 N>0 The MATLAB code to calculate N factorial for positive value of N would be

Reviews

Write a Review

Civil Engineering Questions & Answers

  What are the legal ways of doing disposal in the valley

A tank with a volume of 5,000 gal contains salt solution at an initial concentration (C0*) of 70,000 mg/L, but the concentration in the tank (C) needs to be reduced to 500 mg/L. Two approaches are being considered

  Determine the magnitude of the couple force on the crank

Determine the magnitude of the couple force so that the resultant couple moment on the crank is zero.

  Find final temperature of steam and amount of mass transfer

A valve is now opened and steam at 1Mpa at 473 K is allowed to enter the cylinder until the volume inside increases to 0.04m^3 . Determine the final temperature of the steam and the amount of mass transfer

  Explain how to show the second derivative of theta

Two ships A and B are moving with constant speeds Va and Vb along straight intersecting courses. The navigator of ship B notes the time rates fo change of the separation distance r between the ships and the bearing angle theta.

  Determine the hydraulic conductivity of the aquifer

Drawdown at an observation well 15 m from the pumped well is 3.0 m, and drawdown at a second observation well 150 m away is 0.30 m. find the hydraulic conductivity of the aquifer.

  Which reactor should be preferred for the treatment plant

Chemical ‘A' is regulated by EPA and the maximum allowable concentration in water is 5 ?g/L. Design a reactor for a water treatment plant where 1000 ppm of chemical ‘A' is introduced at a flow rate of 100 m3/min.

  Design the ramp for the highest horizontal curve

The entrance to Mt. Hood Meadows (elevation 3,075 ft at the point of crossing) is grade separated from Viking highway (elevation 3,050 ft at the point of crossing) and will have to be connected. The two roadways intersect at a right angle.

  Calculate change in diameter and axial stress in each bar

The bottom bar is made up of an aluminum bar and a steel bar, each 10 in. long placed in the parallel configuration at 70 F. That is also heated to 300 F.

  Total expansion and total bleeding in term of percentage

To avoid shrinkage cracks in the grout, what should be the total expansion and total bleeding in term of percentage for the grout?

  Coefficient of static friction between pacakges

The belt starts from rest at time t=0 and its speed increases at a constant rate of 150mm/s^2. Knowing that the coefficient of static friction between the pacakges..

  Find the magnitude and direction of the resultant axial

A nozzle that discharges a 4in water jet into the atmosphere is onthe right end of a 10in diameter hose. the water in the pipehas a velocity of 12fps and a gage pressure of 60psi. Find the magnitude and direction of the resultant axial force reaction..

  Determine the required capacity of the motor of the

A step-type escalator as shown is designed to transport 120 persons per minute at a constant speed v=1.5 ft/s. The overall efficiency of the escalator is estimated to be 70%, and a 200% overload is to be allowed. Assuming that the average weight per ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd