Define fixed instrumentation - sounding or sensing devices, Civil Engineering

Assignment Help:

Define Fixed instrumentation - Sounding or Sensing Devices?

It is possible to monitor local scour at pier or abutment using fixed instrumentation as an alternative to the sounding and scour sensing devices. With fixed instrumentation, local scour can be continuously monitored on real time basis, unaffected by washing back of silts and sands.

Related Discussions:- Define fixed instrumentation - sounding or sensing devices

Dense bituminous macadam, Dense Bituminous Macadam: A Dense Bituminou...

Dense Bituminous Macadam: A Dense Bituminous Macadam (DBM) is a close-graded premix material having a voids content of 5-10 per cent. Two gradings are normally adopted :

Explain stopping sight distance on horizontal curve, Explain Stopping Sight...

Explain Stopping Sight Distance on Horizontal Curve Section Obstructions along the inside of curves can limit the available (chord) sight distance. A curve must be designed tha

Thermal stresses, Thermal stresses: In Thermal stresses, you have stud...

Thermal stresses: In Thermal stresses, you have studied (a) The effect of temperature on bodies and materials, (b) The concept of thermal stresses, and (c) The techni

#tile.., Material for formwork and their specifications

Material for formwork and their specifications

Chain surveying, Chain Surveying: In the chain surveying, you have stu...

Chain Surveying: In the chain surveying, you have studied the basics of chain surveying. In chain surveying, various equipment and instruments are used for measuring distances

Define abrasion - underwater inspection of bridge, Define Abrasion - underw...

Define Abrasion - underwater inspection of bridge? Deterioration of substructures by abrasion is caused by wave action, the velocity of the currents and the action of suspended

Determine the flow area of storm water, Storm water flows at a depth of 4 f...

Storm water flows at a depth of 4 ft in the natural channel as shown in the figure. The channel has a slope of 0.0l ft/ft and n = 0.025. 1. Determine the flow area:

Scheme of some smaller piles with same load capacity, Question Which wi...

Question Which will be a better choice, a large diameter piles or a scheme of some smaller piles with same load capacity ? Answer Choice of a large diameter pile suff

Calculate the percent change in load on the wall form tie, A concrete wall ...

A concrete wall form tie with an ultimate strength capacity of 2,400-lbs is designed for use in a concrete wall form with an 18-in center to center spacing. During formwork inspect

Reinforcement, 1feet

1feet

Write Your Message!

Name

Email id

Message

Verfication Code

User Account

All Pages