Define about the inclined borings, Civil Engineering

Assignment Help:

Define about the Inclined Borings

Inclined  brings may also be used in exploration of  inclined strata and for the detection of weak pockets (lenses),  buried channels,  cavities and fault zones particularly in rock. Each inclined bore hole furnishes information on variations  in sub-surface conditions in both vertical and horizontal conditions. All the borings for exploration of narrow or elongated areas should not be located in a single straight line. However, sufficient number of borings should be made outside the main line to determine the dip and strike  to the surface strata.

 


Related Discussions:- Define about the inclined borings

Determine the liquidity index and void ratio of the sample, A piece of clay...

A piece of clay taken from a sampling tube has a wet weight of 1.553 N and volume of 95.3 cm . After drying in an oven for 24 hours at 105°C, its weight is 1.087 N. The liquid and

Premix carpet - road pavements, Premix Carpet: An open graded premix ...

Premix Carpet: An open graded premix carpet, commonly called premix carpet (PC), is an open graded premixed material laid to a thickness of 20 mm and rolled, followed by a se

Define coefficient of consolidation, Define and distinguish among coefficie...

Define and distinguish among coefficient of volume compressibility and coefficient of consolidation. Explain clearly one method of computing coefficient of consolidation, given

Define the pre-tensioned concrete construction, Define the pre-tensioned co...

Define the pre-tensioned concrete construction We understand that in the pre-tensioned concrete construction, stretched tendons are provided in the concrete moulds at the time

Cutbacks and emulsions, Cutbacks And Emulsions: Cutbacks A cu...

Cutbacks And Emulsions: Cutbacks A cutback is a bitumen whose viscosity has been reduced by adding a diluent such as naphtha or kerosene. The use of cut-back is not f

Illustrate the concept of load balancing, Concept of load balancing In ...

Concept of load balancing In above cases of concentric and eccentric pre-stressing, straight tendon profiles (or tendon shapes) along the beam span have been considered. If a t

Bearings, what is the difference between whole circle bearing and reduced b...

what is the difference between whole circle bearing and reduced bearing?

Define the term - post-tensioned concret, Define the term - post-tensioned ...

Define the term - post-tensioned concret In the Prescon and B.B.R.V. systems button heads are created at the ends of tendons. In the case of Prescon system, 2 to 130 tendon wir

Determine the term- shrinkage of concrete, Determine the term- Shrinkage of...

Determine the term- Shrinkage of Concrete Shrinkage of concrete is primarily due to gradual loss of moisture which results in change in volume. The shrinkage of concrete depend

Write Your Message!

Captcha
Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd