Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Write the mass balance equation for a completely mixed lake with an impulse input of mass,M, added at time t=0. Assume the lake is of constant volume, V, with continuous outflow, Q, and a conservative substance. Solve for the outlet concentration in terms of the initial concentration Co, the mean hydrualic detention time (T), and time t. Plot the concentration C/Co versus t/T. How long does it take for 95% of the impulse input of material to be depleted from the system?
Rigid members ABC and DEF are joined with steel links BE and CF using 25mm pins. The links are made of 25mm thick 50mm wide plates and are single shear. Determine the maximum normal stress in each of links BE and CF
As part of a drainage improvement project, a drainage ditch will be straightened and cleaned. As a result, the lenght of the ditch will decrease from 1800 ft to 1400 ft and the mannings roughness factor will be reduced to 0.018 from 0.022.
An ideal reheat rankine cycle operates between the pressure limits of 20 kPa and 10 MPa, with reheat occuring at 3 MPa. The temperature of steam at the inlets of both turbines is 500 C
Assume a cross-sectional medial length of 32 in. (no stretching of the sheet due to bending). If the maximum shear stress must be limited to 19 ksi, determine the maximum torque that can be carried by the hollow section
a prismatic bar AB of length L, cross section A, modulus of elasticity E, and weight W hangs vertical under its own weight. if the bar is a riser pipe hanging from a drill rig at sea, what is the total elongation of the pipe
The tunnel is supplied with 1500 kg dry air/h at 50°C and 10% RH, and the air leaves at 25°C in equilibrium with the product at 50% RH. Determine the moisture content of product leaving the dryer and the final water activity.
The potentiometric surface elevations at two observation wells 1000 m apart are 52.35 m and 56.90 m. If the horizontal hydraulic conductivity of the auquifer is 25 m/ day determine the specfic discharge, and average linear veolicity of the flow as..
find the maximum allowable force P if the maximum allowable bearing stress on 6 pins holding 2plates together is σ all=10 MPa, and the maximum allowable shear stress is τ all =25 MPa
one gram of pepper is placed into a 100 mL beaker, and the beaker is filled with water to the 100 mL mark. What is the concentration of pepper in mg/L. What should one assume in this problem
A well-insulated rigid vessel of volume 0.2 m^3 is divided into two equal compartments by thin diaphragm, as illustrated in the accompanying figure. One of the compartments is a vacuum
a level test track has a coefficient of road adhesion of 0.80, and a car being tested has a coefficient of rolling friction that is approximated as 0.018 for all speeds. the vehicle is tested unloaded and achieves the theoretical minimum stop in 1..
After the copper mass is added, the final temperature of the mixture is 38 degrees Celsius. By checking the mass, it is determined that 1.2 grams of water evaporated. What was the temperature T
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd