What would be the lightest w shape that can resist a service

Reference no: EM13532265

1.What would be the lightest W- shape that can resist a service load of 62.5 kips and service dead load of 62.5 kips and service live load of 125 kips. The effective length is 24 feet. UseASTM A572 grade 50 steel.

2.A compression member is subjected to service loads of 165 kipsdead load and 535 kips live load. The member is 26 feet long andpinned at each end. Use A992 steel and select a W14shape.

Reference no: EM13532265

Questions Cloud

Find the load bearing strength of a support beam : Looking a wood (pine) deck material. It's a simple 8' by 8' deck. There's a support beam holding up this deck. Other end is connected to building.

Concrete pier is loaded on top with a uniformly : Concrete pier is loaded on top with a uniformly distributed load of600 lbs per square foot. Investigate the state of stressat a level of 4 ft. above the base.

Relevant materials properties : Whisker filaments of SiC that are 5 μm thick are coated withan aluminum alloy using a chemical bonding process. The coating process is carried out at 650 oC before the sample iscooled to room temperature

Trial section selected checked revised ifnecessary : Select the lightest available W14 section for column tosupport the axial compression loads Pd=150k and Pl=200 k if KL =14ft and A572 grade 50 steel is used. Column is assumed to be inframe that is braced against side-sway

What would be the lightest w shape that can resist a service : A compression member is subjected to service loads of 165 kipsdead load and 535 kips live load. The member is 26 feet long andpinned at each end. Use A992 steel and select a W14shape.

Plot the relationship between the approach speed v and the : Plot the relationship between the approach speed v and thelength of the dilemma zone for the following data:a2 = 0.5g, δ2 = 1.0s,w = 65ft, L = 15ft, and τ = 4.5s (wherea2 is the acceleration

Calculate invert elevations at each 50ft station along line : A sewer pipe is to be laid from station 10+00 to station 13+20on a -1% grade, starting with invert elevation 326.32ft. at 10+00.Calculate invert elevations at each 50ft station along line.

Determine the stations and elevation sof the bvc and evc and : A sag vertical curve connects a -1.5%grade and a +1.5% grade on a freight and intercity main linerailway track. If the grades intersect at station (300+25.35)and an elevation of 350.50ft,

How many days will be required for fill construction : A 10,000 cubic yards fill along a forest road right of waywill be compacted using grid rollers to a unit weight of 120 poundsper foot cubed. the fill material will be hauled to the site in 12cubic yard dump truck that are tipically loaded to about 85..

User Account

All Pages