What will the freeway density

Assignment Help Civil Engineering
Reference no: EM13207629

An eight lane urban freeway (four lanes in each direction) is on rolling terrain and has 11-ft lanes with a 4-ft right-side shoulder. The interchange density is 1.25 per mile. The base free-flow speed is 70 mi/hr. The directional peak-hour traffic volume is 5400 vehicles with 6% large trucks and 5% buses (no recreational vehicles). The traffic stream consists of regular users and the peak hour factor is 0.95. It has been decided that large trucks will be banned from the freeway during the peak hour. What will the freeway's density and level of service be before and after the ban? (Assume that the trucks are removed and all other traffic attributes are unchanged)

Reference no: EM13207629

Questions Cloud

Find the lateral area of the frustum : a regular hexagonal pyramid has an upper base edge of 16 ft. and a lower base edge of 28 ft. if the volume of the frustum is 18041 ft^3., find the lateral area of the frustum.
What the meaning of steady state : could you please help me to figure out what the meaning of steady state in the pavement management system preservation and rehabilitation.
Dangerous environments : Do you think that people are willing to follow their GPS anywhere, include dangerous environments? Do GPS technologies affect our awareness of geography and why?
Explain when a chemical change has occured : What observations might enable us to deduce that a chemical change has occured when dilute aqueous
What will the freeway density : What will the freeway's density and level of service be before and after the ban? (Assume that the trucks are removed and all other traffic attributes are unchanged)
How the political equilibrium will differ from an election : Suppose as well, that all voters favoring liberal candidates will vote, while only 50% of those favoring conservative candidates will vote. Create a graph to show how the political equilibrium will differ from an election in which all citizens vot..
What is the cumulative depreciation through the end of year : Under the 200% DB depreciation, what is the cumulative depreciation through the end of year four? The useful life of the mixing tank is 9.5 years.
Concerning globalization resistance : Locate a recent professional journal article, concerning globalization resistance, challenges and dimensions to globalization and security, or global social and political unrest.
Find the final temperature and the amount of work : Air can be assumed as a di-atomic ideal gas. Find the final temperature and the amount of work ( in kW) required for air compression at a rate of 100 mol/s , from an initial condition of 1 bar an 25 C to 10 bar; for the following ways.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Superelevation rate for a roadway

What superelevation rate would you recommend for a roadway with a design speed of 100 km/hr and a radius of curvature of 500 m? Assume f = 0.11.

  Bernoulli equation-measure the flow rate through the meter

The meter inlet and throat are connected by the two legs of a mercury manometer. Use the Bernoulli equation to describe how this manometer can be used to measure the flow rate through the meter.

  Explain roman technology and engineering

Roman technology and engineering. Technology and engineering were among Rome's most famous achievements. Describe and explain the importance of Roman technology and engineering

  Di-atomic ideal gas

Air can be assumed as a di-atomic ideal gas. Find the final temperature and the amount of work ( in kW) required for air compression at a rate of 100 mol/s , from an initial condition of 1 bar an 25 C to 10 bar; for the following ways:

  Qualitative or quantitative risk assessment on the project

Conduct either a qualitative or quantitative risk assessment on this project. Identify the risk factors that you consider most important for the suspension bridge construction. How would you assess the riskiness of the project? Why?

  Smallest standard commercial pipe

For satisfactory operation, the static pressure at the pump inlet must not be lower than -6 m of water gage. Determine the smallest standard commercial pipe that will give the required performance.

  Highway construction project

A soil sample was taken from a proposed cut area in a highway construction project and sent to a soils laboratory for a compaction test, using the Standard Proctor compaction procedure. Results of the test are as follows:

  Spreader beam and hoisted by a crane

The 3.5mg engine is suspended from a 500 kg spreader beam and hoisted by a crane which gives it an acceleration of 4m/s^2 when it has a velocity of 2m/s. determine the force in chains AC and AD during the lift.

  Design of wastewater treatment plant for a community

Consider the design of wastewater treatment plant for a community wiyh average daily and peak hourly wastewater design flows of 2.0 mgd. The raw sewage has an average of 230 mg/l BOD5 and 260 mg/l of suspended solids.

  Duplex system with no redundancy

What is the salt usage for each regeneration if the system regenerated every 10 days? What size resin tanks (diameter, height) would be required for a duplex system with no redundancy?

  Determining transformed moment of inertia

Determine the transformed moment of inertia for the beam using steel as the reference material. Express your answer in in^4 to the nearest 0.1 in^4.

  Base of each standpipe

Determine: a) the height of the water, with respect to the base of each standpipe, and b) the effective stress at the depth of each standpipe, at the following times:

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd