What will be the least pillar dimension

Assignment Help Civil Engineering
Reference no: EM13531060

1.A cylindrical specimen ofcold-worked copper has ductility (%EL) of 15%. If its coldworked radius is 6.4 mm (0.25in.), what was its radius before deformation?

2.A 2in cube coal specimen, which was tested in a lab, failed at 8,000lb.  A set of main entries is to be designed through the 5ft seam from which the specimen was extracted.  If there is 500ft of overburden, and assuming a 50% recovery, what will be the least pillar dimension?

Reference no: EM13531060

Questions Cloud

Actual width of the beam where tis evaluated : For a beam made of 2 materials with different moduli of elasticity,show that the shear stress formula τ =VQ/lt remains validprovided that both Q and I
Calculate the average velocity of the car : A car travels at 35.0 m/s for 40.0 minutes and then travels at 55.0 m/s for 20.0 minutes. What is the average velocity of the car
What true stressis necessary to produce a true plastic : A coal mine's entry and breakthrough centers are set at 60ft with 20ft-wide openings.  The 6ft coal seam lies 1,000ft below the suface, and the specific gravity of the overburden is 2.4.  If the compressive strength of 4in.
Find how much charge resides on the capacitor : a heart defibrillator is charged to 350V. It is connected to a patient's chest and allowed to discharge through the heart. After 2secs, how much charge resides on the capacitor
What will be the least pillar dimension : A 2in cube coal specimen, which was tested in a lab, failed at 8,000lb.  A set of main entries is to be designed through the 5ft seam from which the specimen was extracted.  If there is 500ft of overburden, and assuming a 50% recovery, what will be t..
Find what is the resistivity in this circuit : In an RC circuit with a capacitance of 10µF and a voltage of 10V the voltage across the resistor after 4s is 4V. What is the resistivity in this circuit
Find the power delivered to the particle : In our Physics lab, a cart is attached to a failing fan which does not run at a constant speed. Find the power delivered to the particle when it is at x = 1.5 m
Evaluate the acceleration of the system : Two crates of mass 65 kg and 125 kg are in contact and at rest on horizontal surface. A 650 N force is excerted horizontally on the 65 kg crate. evaluate the acceleration of the system
What is the tension when the rock is at the bottom : A rock of mass m = 1.1 kg is tied to a string of length L = 2.5 m and is twirled in a vertical circle, what is the tension when the rock is at the bottom

Reviews

Write a Review

Civil Engineering Questions & Answers

  Width of the footing if factor of safety given

Characteristic values of the shear strength parameters of the soil are c'= 0, and f' = 400. Determine the required width of the footing if a factor of safety of 3.0 against shear failure is specified when the water table rise to foundation level.

  Discuss how the nec3 form of contract provides stimulus

Discuss how the NEC3 form of contract provides stimulus to good management and compare and contrast this where possible with other forms of contract.

  Determine the thickness for the slab and select the size

A solid one-way slab is to be used for a framing system Column spacing is 33 ft, with regularly spaced beams occurring at 11 ft center to center. Superimposed dead load on the structure is 50 psf and the live load is 75 psf.

  Determine the cost of capital for the company

a new space age development corporation in wichita kansas has borrowed a sum of $4M from a friendly bank at an interest rate of 9%. the company has also borrowed another $1M from other sources at an interest rate of 8%.

  Which reactor should be preferred for the treatment plant

Chemical ‘A' is regulated by EPA and the maximum allowable concentration in water is 5 ?g/L. Design a reactor for a water treatment plant where 1000 ppm of chemical ‘A' is introduced at a flow rate of 100 m3/min.

  Calculate individual standard deviations for treatment group

One issue is to calculate the "pooled" variance and "pooled" standard deviation. Since we expect that the variances of the improvement scores by both groups could be a bit different, we'd want an overall value that reflects the variance of both gr..

  How to estimate the pesticide concetration in the lake

the flow into the lake is from is from a stream is 300 m3/d andthe flow into the lake from runoff averages 20 m3/d. The lake is used for fishing by the local residents but the pesticides from local farms may damage the fish population.

  Determine what is the static height reading of manometer

A manometer of water reads a height of 20cm at a temperature of 15 degrees C. If the diameter of the manometer tube is 1mm, what is the static height reading

  Determine the moment about each of the coordinate axes

knowing the tension in cable AC is 1065 N, determine the moment about each of the coordinate axes of the force exerted on the plate at C

  Provide cash flow diagram to get a basic fridge

Mark's refrigerator has just died. He can get a basic fridge or a more efficient fridge with an Energy Star designation. Mark wants to consider a 10 year planning horizon using an interest rate of 5%.

  Determine the lengths and bearings of sides of polygon

Determine the lengths and bearings of the sides of a closed polygon traverse whose corners have the following x and y coordinates: A(5000.00, 5000.00) B(5289.67, 5436.12) C(4884.96, 5354.54) D(4756.66, 5068.37)

  Determine what is the final weight in pounds and newtons

A container weights 2.06lb. It is filled with 1.09ft^3 of water at 25 degrees Cel. What is the final weight in pounds and newtons

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd