What volume of sludge must digester dispose of each year

Assignment Help Civil Engineering
Reference no: EM13306277

Ottawa's anaerobic digester produces 13m3/day of sludge with a suspended solids concentration of 7.8%. WHat volume of sludge must they dispose of each year if their sand drying beds yield a solids concentration of 35%?

Reference no: EM13306277

Questions Cloud

Compute the convective heat transfer coefficent : Water at a flow rate of 1 kg/s is flowing in a pipe of internal diameter 5 cm. If the inside pipe surface temperature is 90 degrees C and mean bulk water temperature is 50 degrees C
Estimate convective heat transfer coefficent for natural : Estimate the convective heat transfer coefficent for natural convenction from a horizontal steam pipe. The outside surface temperature of the insulated pipe is 80 degree C. The surrounding air temperature is 25 degress C.
Compute the frequencies of the first three harmonics : A 80cm long metal string under 34.5 N tension has a linear mass density 2.10x10^-4 kg/m. Find the frequencies of the first three harmonics
Write and test a function that prints an error message : Write and test a function that prints an error message in the following format.
What volume of sludge must digester dispose of each year : WHat volume of sludge must they dispose of each year if their sand drying beds yield a solids concentration of 35%
Derive boolean equations for the magnitude comparator : Derive boolean equations for the carry lockhead generator for the binary adders of 6-bit numbers.
Find the angular acceleration of the plate at the instant : An external moment of magnitude 110 N-m is applied in the counter clockwise direction as shown. A frictional moment of magnitude 10 N-m resists the rotation. The specific weight of the material is 250 lbs / ft3.
Determine the speed of both cars : The driver of one car sounds a 365 Hz frequency horn and the driver of the other car hears a frequency of 392 Hz, Determine the speed of both cars
Determine the increase in the temperature of the river : A power plant operates at steady-state. It receives energy from a hot source (combustion of fuel) at a temperature of 420 oC. The plant discharges this energy to a nearby river that acts as a cold source.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate what is the average velocity of the groundwater

The aquifer characteristics are: Ambient temperature=8 oC Hydraulic conductivity = 123 ft/day Hydraulic gradient = 0.00091 ft/ft Effective porosity = 0.31 Total organic carbon = 198 mg/kg Bulk density = 1.65 g/cm3

  Determine what is ph of the solution at equilibrium

Calcium sulfate (CaSO4, solubility product Ksp=2*10^-5 M^2), is added to initially pure water, such that solid CaSO4 remains at equilibrium. (Assume the sulfate does not participate in reaction other than the solubility product; no HSO4- formed).

  Determine if a simple supported w beam has the capacity

Determine if a simple supported W 12x26 (A36 steel) beam has the capacity to support loads that produce 50 kips of live-load shear and 20 kips of dead-load shera.

  Determine diameter of solid shaft if it is to transmit 50hp

If the allowable shear stress is 15ksi, determine the diameter of a solid shaft if it is to transmit 50hp at a frequency of (a) 900rpm, (b) 1800rpm

  Determining equivalency factor of single axle

The weights on the same axles when the truck is empty and leaving the power plant are 10 kips, 12 kips, and 8 kips, respectively. A two lane road is to be designed to serve the power plant and to last for a period of 10 years. a) What is the equiv..

  How to determine the efficiency of the pump

Water is pumped at a rate of 1.57 cfs from one large open tank into another through a 6 in diameter cast iron pipe 400 ft long. The water level in the second tank is 160 ft above the level of the first tank and the discharge end of the pipe is sub..

  Calculate earth gravitational force

Calculate Earth's gravitational force on the Shuttle astronauts while orbiting at an altitude of 220 miles (or 354 km) above Earth's surface.

  Derive an equation for the undrained shear strength of clay

if a clay slope at a construction site fails derive an equation for the undrained shear strength of the clay given that the shear reistance along L of the slope can be given as: (SuH0)/ sin beta

  Determine what is the effluent bod concentration

An activated sludge tank, 30 x 30 x 200 ft, is designed as a plug-flow reactor, with an influent BOD of 200 mg/L and a flow rate of 1 million gallons per day. a. If BOD removal is first-order reaction, and the rate constant is 2.5 days^-1, what is ..

  Vehicle delay due to queuing

Vehicles begin to arrive at a toll booth at 850 am with an arrival rate of x(t) = 4.1 + .01t (with t in min and x(t) in veh /min.) The toll booth opens at 9am and processes vehicles at a rate of 12 per minute throughout the day. Assuming D/D/1 que..

  Calculate pressure in point 1 nd density of manometric fluid

A U manometer reads 20 cm air as operating fluid and a given manometric fluid. A single branch closed tube reads 35 cm connected to point 1. If P2 = 1.2 ATM calculate the pressure in point 1 and the density of the manometric fluid.

  Define introduction to management science

Introduction to management science, The Dynaco Manufacturing Company produces a particular product in an assembly line operation. One of the machines on the line is a drill press that has a single assembly line feeding into it.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd