What speed limit will be recommend at section of highway

Assignment Help Civil Engineering
Reference no: EM13307982

A section of a road has a superelevation of .6% and a curve of 600ft radius. What speed limit will you recommend at this section of the highway?

Reference no: EM13307982

Questions Cloud

Find the limiting length of an offset of a point on paper : Find the limiting length of an offset so that the displacement of a point on paper is may not exceed 0.025 centimetres.The offset was laid 3 degree out from it's true direction and the scale was 10m to 1cm.
Determine how far away from the earth is the spaceship : Two astronauts are, 3.18 m apart in their spaceship, speaking to each other. How far away from the Earth is the spaceship?
How would structure a portion of an aviation safety program : How would you structure a portion of an Aviation Safety program for a commercial airline or government agency. Briefly describe one or two safety problems and why it is a serious safety problem.
Five forces of competition : Five Forces of Competition
What speed limit will be recommend at section of highway : A section of a road has a superelevation of .6% and a curve of 600ft radius. What speed limit will you recommend at this section of the highway
Determine max grade on which passenger car a can travel : Determine the maximum grade on which passenger car A can travel without its total resistance exceeding that of car B traveling on a straight and level section of road.
Does the monopoly serve both groups of customers : Does the monopoly serve both groups of customers? Compare the monopoly’s profit from the optimal pair of two part tariffs with the profit that she could make if she ignored the poor consumers altogether.
How much users can store on your servers : Ability to store files in a centralized location easily Explain what services must be installed on the network to satisfy each requirement.
Find additional force that will be require to maintain speed : A passenger car being driven on a flat and straight section of a highway at a speed of 65 mph reaches a curved section of the highway with a grade of 5% and a radius of 1,500ft.

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  What is overturning factor of safety for building wind load

How many floors can be added to the building while maintaining the code required overturning factor of safety of 2.0 Assume the roof supports a wind load of 4 kips and all floors below support a wind load of 8 kips.

  Compute minimum footing width required to maintain safety

a bearing wall carries a dead load of 120kn/m and live load of 100 kn/m. It is to be supported on a 400mm deep continuous footing underlain by a medium sand (unit weight = 19.2 kn/m3, phi= 37 deg, effective c = 0).

  What is the alkali-aggregate reaction

What is the alkali-aggregate reaction? List some of the rock types that are vulnerable to attack by alkaline solutions. Discuss the effect of aggregate size on the phenomenon.

  Coefficient of curvature for each soil

Determine the effective size as well as the uniformity coefficient and coefficient of curvature for each soil. Determine also the percentages of gravel, sand, silt, and clay according to (a) ASTM, (b) AASHTO, (c)USCS, and (d) the British Standard.

  Determine time at which collar starts to slip relative to it

The coefficient of static friction between the collar of mass m=2 kg and the bent bar is Us=0.35, and the collar is initially d=70 cm from the spin axis AB. Assuming the motion starts at t=0, determine the time at which the collar starts to to sli..

  What was involved in the first far-reaching

what was involved in the first far-reaching, comprehensive study of Earth's oceans?

  Quartzite sample in a compression testing machine

A quartzite sample in a compression testing machine is 180mm long and 54mm in diameter. what is the stress under a load of 100kN? if the modulus of elasticity is 102kN/mm2, find the strain develope in the sample.

  Determine the percent overload if load estimate is correct

A customer estimates that he is getting 30 cubic yards (loose) of gypsum in his scraper. Determine the percent overload if the load estimate is correct. The maximum load capacity of the scraper is 84,000 pounds.

  Calculate the minimum required wall thickness t-min

A tubular aluminium bar (G=28GPa) of square cross section with outer dimensions 50mm x 50mm must resist a torque T=300Nm. Calculate the minimum required wall thickness t_min if allowbale shear stress is 20MPa

  Find the magnitude of the force on one side of plate

A rectangular plate 5ft by 4ft is at an angle of 30 degrees with the horizontal, and the 5-ft side is horizontal. Find the magnitude of the force on one side of the plate and the depth of its center of pressure when the top edge is (a) at the wate..

  Determine station of point where superelevation runoff begin

The station of the PC is 20+00. Determine the station of the point where th superelevation runoff begins, the station whe the tangent runoff begins and the station where the curve is fully superelevated if the design superelevation is 6%

  How to estimate the value of the fuel that is captured

If the tanker truck discharges into the top of the tank with no vapor control, the emission of gasoline vapors is estimated to be 2.75k*m^-3 of gas delivered to the tank.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd