Find additional force that will be require to maintain speed

Assignment Help Civil Engineering
Reference no: EM13307978

A passenger car being driven on a flat and straight section of a highway at a speed of 65 mph reaches a curved section of the highway with a grade of 5% and a radius of 1,500ft.

Determine:
(a) The additional force that will be required to maintain the original speed at 65mph
(b) The percentage increase in the total force to maintain the original speed at 65mph

Reference no: EM13307978

Questions Cloud

What speed limit will be recommend at section of highway : A section of a road has a superelevation of .6% and a curve of 600ft radius. What speed limit will you recommend at this section of the highway
Determine max grade on which passenger car a can travel : Determine the maximum grade on which passenger car A can travel without its total resistance exceeding that of car B traveling on a straight and level section of road.
Does the monopoly serve both groups of customers : Does the monopoly serve both groups of customers? Compare the monopoly’s profit from the optimal pair of two part tariffs with the profit that she could make if she ignored the poor consumers altogether.
How much users can store on your servers : Ability to store files in a centralized location easily Explain what services must be installed on the network to satisfy each requirement.
Find additional force that will be require to maintain speed : A passenger car being driven on a flat and straight section of a highway at a speed of 65 mph reaches a curved section of the highway with a grade of 5% and a radius of 1,500ft.
It averaging business advantage at a management level : You are to research an actual example of IT leveraging business advantage at a management level.
What is the maximum acceleration of the ball : a ball hung from a vertical spring oscillates in simple harmonic motion with an angular frequency of 2.6 rad/s, What is the maximum acceleration of the ball
What technologies should be used to secure these areas : On what areas should the security policy focus (physical security, data security, auditing, passwords, and so forth), and what technologies should be used to secure these areas?
How much work is done on it by the external force : A -50 nC charged particle is in a uniform electric field {E} = (10 V/m, east). An external force moves the particle 1.0 m north, then 6.0 m east, How much work is done on it by the external force

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate size of the initial flaw that will cause failure

A high strength steel is developed with a yield stress of 1460 MPa and a critical stress intensity factor of 30MPa(m)^0.5. Calculate the size of the initial flaw that will cause failure in an infinite plate when the load applied is 50% of the load..

  Determine does there appear to be any trend in the data

The US EPA has published the following data for the release to the Florida environment of sulfuric acid (H2SO4 ), the most widely used industrial chemical (in millions of pounds).

  Horizontal curve on a single-lane highway

A horizontal curve on a single-lane highway has its PC at station 124 + 10 and its PI at station 131 + 40. The curve has a superelvation of 0.06 ft/ft and is designed for 70 mi/h. What is the station of the PT?

  Find the work done in pumping the water

a horizontal cylindrical tank 4 ft in diameter and 10 ft long is full of water. find the work done in pumping the water to a point 4 above the top of the tank.

  Calculate distance downwind xl at which the plume released

A powerplant is burning coal on a cold, clear winter morning at 8am with a wind speed of 2.6m/s measure at 30m and an inversion layer with its base height of 697m. The effective stack height is 30m.

  How long must the temperature at t2 be maintained

A block of material A is placed in closed contact with unlimited supply of material B, after 15 hours at temperature T1, it is observed that atoms of B have penetrated 0.5mm into material A.

  Explain metallurgical balance in mineral processing

Metallurgical balance in mineral processing, Assume 2000 short tons of ore were mined, 200 tones were rejected as waste and the tonnage accepted for metallurgical treatment

  Estimate the et losses for the area in inches and centimeter

The discharge of the river at the basin outlet is measured at an avarage of 650 cfs. assuming that the charge in storage for the system is essentially zero, estimate the ET losses for the area in inches and centimeters for the year

  How to show the transition on the speecific energy curve

A rectangular channel has water flowing at a depth of 1.6 ft with a corresponding specific energy of 1.736 ft. A step up on the channel bed resulte in the flow becoming critical. The critical depth is 1.29 ft and corresponding specific energy is 1..

  Estimate the settlement of 10ft and 5ft square footing

Footings for a structure are to be built beneath a basement slab on a clay soil at a depth of 20 ft below present ground level. The groundwater table is 15ft below the ground surface. The soil void-ratio is about 0.087.

  Determine the position of the race car

Starting from x = 0 with no initial velocity, the acceleration of a race car is defined by the relation a = 6.8e-0.00057x, where a and x are expressed in m/s2 and meters, respectively. Determine the position of the race car when v = 30 m/s.

  What is the width of the second floor

A cross section of a cottage, 20 ft wide, is an isosceles triangle. If the slope of a side is 1.75 and there is a second floor 8 ft above the ground floor, what is the width of the second floor?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd